Page 1
Project __________________________
Item ____________________________
Quantity _________________________
MERIDIAN SERIES
®
CSI Section 11400
Solid Door Pass Through Refrigerators
MODELS:
MRPT1-S Single section MRPT2-S Two section MRPT3-S Three section
Full height door Full height doors Full height doors
MRPT1R-S Remote MRPT2R-S Remote MRPT3R-S Remote
MRPT1-SH Single section MRPT2-SH Two section MRPT3-SH Three section
Half height door Half height doors Half height doors
MRPT1R-SH Remote MRPT2R-SH Remote MRPT3R-SH Remote
MERIDIAN SERIES
MRPT2-GHSH
(Shown with optional 1/2 glass doors)
NSF REFLECTS REF ONLY
SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum.
Facing of shroud shall be easily removable without the
use of tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three epoxy-coated wire shelves
per door section. Shelf support pilasters shall be
heavy-duty with shelves adjustable at 1.0” (2.5 cm)
increments. Units are mounted on 6” (15.24 cm) metal
legs.
Doors: Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density
foamed in place polyurethane. Each door shall have
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with minimal
energy cost
• Exterior digital thermometer with high/low temperature
alarm
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
two self-closing, cam-lift style hinges. Doors shall be easily
removable without use of tools. Door gaskets shall be
magnetic snap-in style to allow simple replacement. Door
handles shall be recessed.
• Please specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Refrigerators: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters
longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
®
SOLID DOOR PASS-THROUGH REFRIGERATORS
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
Page 2
Meridian Series® Solid Door Pass-Through Refrigerators
36.25”
92.1cm
29”
73.6cm
36.25”
92.1cm
56”
142.2cm
36.25”
92.1cm
83”
210.8cm
Model #__________
CSI Section 11400
12.14”
30.8cm
36.25”
92.1cm
PLAN VIEW MRPT1-S
81”
205.7cm
25”
63.5cm
ELEVATION VIEW MRPT1-S
58”
147.3cm
27.25”
69.2 cm
PLAN VIEW MRPT2-S
52”
132.1cm
PLAN VIEW MRPT3-S
79”
200.7cm
ELEVATION VIEW MRPT3-SELEVATION VIEW MRPT2-S
3.80”
9.7cm
26.48”
67.3cm
81”
205.7cm
56.76”
144.2cm
6.00”
15.2cm
END SECTION VIEW
ALL MODELS
DOOR CLEARANCE DETAIL
ALL MODELS
PERSPECTIVE VIEW
ALL MODELS
MECHANICAL DETAIL
MECHANICAL DATA
SHELVES NO UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. SYSTEM CAP WEIGHT PLUG
REFRIGERATORS
MRPT1-S 115 6.0 26.64 12.81 3 1/4 2092 414 5-15P
MRPT1-SH 115 6.0 26.64 12.81 3 1/4 2092 414 5-15P
MRPT2-S 115 12.0 55.42 27.54 6 1/2 3637 620 5-15P
MRPT2-SH 115 12.0 55.42 27.54 6 1/2 3637 620 5-15P
MRPT3-S 115/208-230 14.0 84.19 42.27 9 3/4 6744 852 —
MRPT3-SH 115/208-230 14.0 84.19 42.27 9 3/4 6744 852 —
Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.
REMOTE SHELVES NO UNIT BTU/HR SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P.* SYSTEM CAP WEIGHT PLUG
REFRIGERATORS
MRPT1R-S 115 3.5 26.64 12.81 3 1/3 — 414 —
MRPT1R-SH 115 3.7 26.64 12.81 3 1/3 — 414 —
MRPT2R-S 115 4.8 55.42 27.54 6 1/2 — 620 —
MRPT2R-SH 115 5.2 55.42 27.54 6 1/2 — 620 —
MRPT3R-S 115 6.1 84.19 42.27 9 3/4 — 852 —
MRPT3R-SH 115 6.7 84.19 42.27 9 3/4 — 852 —
*Recommended
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Printed in the USA.
03/07
DSMPT_R
Loading...