Delfield MHRT1-GS, MHRT1-S, MHRT2-GS, MHRT2-S Specifications

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

MERIDIAN SERIES

®

Heated Roll-Throughs

MODELS:

 MHRT1-S Single section  MHRT2-S Two section
Solid full height door Solid full height doors

 MHRT1-GS Single section  MHRT2-GS Two section
Solid full height door (one side) Solid full height door (one side)
Glass full height door (one side) Glass full height door (one side)

MERIDIAN SERIES

MHRT2-G

SPECIFICATIONS

Exterior: Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use
of tools.

Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.

STANDARD FEATURES

• Built in door locks

• Durable stainless steel doors and shroud, for lasting
good looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude
into kitchen trafc

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Heating system is located outside the food zone, more
space for product storage

• Easy to read dial thermometer

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Aluminum interior stands up to food acids without
corroding

• Lots of interior storage space for the money

Glass Doors - Unit is provided with hinged glass front
door(s). Glass doors are constructed with a combination of
extruded aluminum & PVC, and are provided with magnetic
gaskets. Doors will have self-closing hinges and continuous
handle along vertical dimension of door(s).

• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable
shroud facing.

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Digital thermometer
 220/50/1 electrical

®

HEATED ROLL-THROUGHS

exposed elements inside cabinet. Fan and heating
elements service accessible without tools. Temperature
to be controlled by an adjustable electronic thermostat.
Night switch in front.

Notes: Bottom to be reinforced with 14-gauge
channels. All units to be supplied with easily attachable
16-gauge stainless steel ramps, one per door opening.
Wiper gasket shall be provided on bottom of door for
seal to ramp.

Doors: Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density foamed
in place polyurethane. Each door shall have two
self-closing, cam-lift style hinges. Doors shall be easily
removable without use of tools. Door gaskets shall be
magnetic snap-in style to allow simple replacement.
Door handles shall be recessed.

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Dual Voltage Models Only: Electrical connections shall
be 115/280-240 volt, 60 hertz, single phase, and must be
hard-wired to the junction box located on top of the unit.

Heating Assembly: Cabinets to be designed to maintain
temperature up to 200ºF. Fin strip heating elements. High
speed blower to provide uniform airow in cabinet 3ºF
variability. Removable/replaceable heating system. No

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Approval _________________

Date____________________

Meridian Series® Solid/Glass Door Heated Roll-Through

34”

86.4cm

36.25”

93.4cm

36.25”

93.4cm

PLAN VIEW MHRT1-S PLAN VIEW MHRT2-S

70.75”

89”

226.1cm

179.1cm

30”

76.2cm

66”

167.6cm

89”

226.1cm

12.14”

30.8cm

186.1cm

73.28”

36.25”

92.1cm

Ramp dimensions

see below

43.58”

110.7cm

END/SECTION VIEW

ALL MODELS

Model #__________
CSI Section 11400

DOOR CLEARANCE DETAIL

ALL MODELS

ELEVATION VIEW MHRT2-SELEVATION VIEW MHRT1-S

3.80”

9.7cm

29.75”

75.6cm

32.25”

81.9cm

MECHANICAL DETAIL

5.92”

15.04cm

RAMP DIMENSIONS

(Not to scale)

1.06”

2.69cm

29.12”
74cm

Ramp Width

PERSPECTIVE VIEW

ALL MODELS

MECHANICAL DATA

CU. FT. SHELVES # of RACK UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P. LOAD SYSTEM CAP WEIGHT PLUG

STAINLESS
MHRT1-S 120/208-240 9.0 38.58 NA NA 1 NA NA NA 450 NA
MHRT2-S 120/208-240 16.0 79.74 NA NA 2 NA NA NA 766 NA
GLASS/SOLID
MHRT1-GS 120/208-240 9.0 38.58 NA NA 1 NA NA NA 465 NA
MHRT2-GS 120/208-240 16.0 79.74 NA NA 2 NA NA NA 796 NA

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Printed in the USA.
01/04
DSMRTH