Delfield MHRI1-G, MHRI1S, MHRI2-G, MHRI2-S Specifications

MERIDIAN SERIES

®

Heated Roll-Ins

MODELS:

 MHRI1-S Single section  MHRI2-S Two section
Solid full height door Solid full height doors

 MHRI1-G Single section  MHRI2-G Two section
Glass full height door Glass full height doors

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

MERIDIAN SERIES

STANDARD FEATURES

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude into

• Attractive aluminum side panels are easy to clean and

• Heavy-duty hinges with stay open feature

• Heating system is located outside the food zone, more

• Easy to read dial thermometer

• Tri seal door gaskets lower energy costs with a unique

• Aluminum interior stands up to food acids without

MHRI2-G

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.

Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide radius
corners and a recessed bottom. Cabinet shall be
fully insulated with high-density foamed in place
polyurethane.

Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing,
cam-lift style hinges. Doors shall be easily removable
without use of tools. Door gaskets shall be magnetic
snap-in style to allow simple replacement. Door handles
shall be recessed.

• Lots of interior storage space for the money

looks

kitchen trafc

corrosion resistant

space for product storage

insulating design

corroding

Glass doors shall be constructed with a combination of
extruded aluminum and PVC and are provided with a
magnetic gasket and shall utilize insulated double-pane
construction. Glass doors shall be provided with self-closing,
cam-lift style hinges, and shall be easily removable without
the use of tools. Mechanical controls shall be located behind
a removable shroud facing.

Dual Voltage Models Only: Electrical connections shall
be 115/208-240 volt, 60 hertz, single phase, and must be
hard-wired to the junction box located on top of the unit.

Heating Assembly: Cabinets to be designed to maintain
temperature up to 200ºF. Fin strip heating element. High
speed blower to provide uniform airow in cabinet 3ºF
variability. Removable/replaceable heating system. No
exposed elements inside cabinet. Fan and heating elements
service accessible without tools. Temperature to be

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 220/50/1 electrical

®

HEATED ROLL-INS

controlled by an adjustable electronic thermostat. Night
switch in front.

NOTES: Bottom to be reinforced with 14-gauge
channels. All units to be supplied with easily attachable
16-gauge stainless steel ramps, one per door opening.
Wiper gasket shall be provided on bottom of door for
seal to ramp.

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Approval _________________

Date____________________

Meridian Series® Heated Roll-Ins

34”

86.4cm

66”

167.6cm

Model #__________
CSI Section 11400

34”

86.4cm

PLAN VIEW MHRI1-S

70.75”

89”

226.1cm

179.1cm

28.20”

71.6cm

ELEVATION VIEW MHRI1-S

34”

86.4cm

PLAN VIEW MHRI2-S

ELEVATION VIEW MHRI2-S

89”

226.1cm

12.14”

30.8cm

73.28”

186.1cm

END/SECTION VIEW

34”

86.4cm

Ramp dimensions

see below

37.68”

95.7cm

ALL MODELS

DOOR CLEARANCE DETAIL

ALL MODELS

29.75”

32.25”

81.9cm

75.6cm

PERSPECTIVE

VIEW

ALL MODELS

MECHANICAL DETAIL

5.92”

15.04cm

RAMP DIMENSIONS

(Not to scale)

1.06”

2.69cm

29.12”
74cm

Ramp Width

3.80”

9.7cm

MECHANICAL DATA

CU. FT. SHELVES # of RACK UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P. LOAD SYSTEM CAP WEIGHT PLUG

STAINLESS
MHRI1-S 120/208-240 9.0 36.15 NA NA 1 NA NA NA 434 NA
MHRI2-S 120/208-240 16.0 74.72 NA NA 2 NA NA NA 616 NA
GLASS
MHRI1-G 120/208-240 9.0 36.15 NA NA 1 NA NA NA 449 NA
MHRI2-G 120/208-240 16.0 74.72 NA NA 2 NA NA NA 676 NA

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Printed in the USA.
01/04
DSMRIH