Delfield MHR1-G, MHR1-S, MHR1-GH, MHR1-SH, MHR2-G Specifications

Project __________________________

Item____________________________

Quantity _________________________

MERIDIAN SERIES

®

CSI Section 11400

CSI Section 11400

Heated Reach Ins

MODELS:

 MHR1-S Single section  MHR2-S Two section  MHR1-SH Single section
Full height solid door Full height solid doors Half height solid door

 MHR1-G Single section  MHR2-G Two section  MHR2-SH Two section
Full height glass door Full height glass doors Half height solid doors

 MHR1-GH Single section  MHR1-GH Two section
Half-height glass door Half height glass doors

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude into
kitchen trafc

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with
minimal energy cost

• Easy to read dial thermometer

MHR2-GHSH

SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be

22-gauge stainless steel. Exterior sides shall
be aluminum. Facing of shroud shall be easily
removable without the use of tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three wire shelves per door section.
Shelf support pilasters shall be heavy-duty with
shelves adjustable at 1.0” (2.5 cm) increments. Units
are mounted on 6” (15.24 cm) metal legs.

Doors: Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density
foamed in place polyurethane. Each door shall have
two self-closing, cam-lift style hinges. Doors shall be

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Chrome shelves

• Aluminum interior stands up to food acids without
corroding

easily removable without use of tools. Door gaskets
shall be magnetic snap-in style to allow simple
replacement. Door handles shall be recessed.

• Please specify right or left hand hinging at time of
order.

Glass doors shall be constructed with extruded
aluminum frames and shall utilize insulated double­pane construction. Glass doors shall be provided with
self-closing, cam-lift style hinges, and shall be easily
removable without the use of tools.

Dual Voltage Models Only: Electrical connections
shall be 115/208-240 volt, 60 hertz, single phase,
and must be hard-wired to the junction box located on
top of the unit.

• Lots of interior storage space for the money

• Rugged metal legs, adjustable to compensate for
uneven oors

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters

Heating Assembly: Cabinets to be designed to
maintain temperature up to 200ºF. Helical shaped,
tubular nned strip heating elements. High speed blower
to provide uniform airow in cabinet. Removable/
replaceable heating system. No exposed elements inside
cabinet. Fan and heating elements service accessible
without tools. Temperature to be controlled by an
adjustable electronic thermostat equipped with an analog
display. On/off switch in front.

MERIDIAN SERIES

®

HEATED REACH INS

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Approval _________________

Date____________________

Meridian Series® Heated Reach-Ins

J-BOX LOCATED
75" AFF FOR ST'D BOXES
83" AFF FOR RI/RT'S

8" (1) door units
11" (2&3) door units

6" (1) door units
23" (2) door units
39" (3) door units

Front of unit

29”

73.7cm

34”

86.4cm

PLAN VIEW ALL MODELS

34”

86.4cm

PLAN VIEW ALL MODELS

56”

142.2cm

12.14”

30.8cm

144.2cm

56.76”

34.0”

86.4cm

Model #__________
CSI Section 11400

END

SECTION VIEW

ALL MODELS

81”

205.7cm

58”

147.3cm

25”

63.5cm

DOOR CLEARANCE DETAIL

ALL MODELS

27.25”

69.1cm

6.00

52”

132.1cm

15.2cm

ELEVATION VIEW MHR2-GELEVATION VIEW MHR1-G

26.48”

67.3cm

3.80”

9.7cm

MECHANICAL DETAIL

PERSPECTIVE VIEW

ALL MODELS

MECHANICAL DATA

SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. LOAD SYSTEM CAP WEIGHT PLUG

STAINLESS DOORS
MHR1-S 120/208-240 9.0 24.96 12.81 3 NA NA NA 420 NA
MHR2-S 120/208-240 16.0 51.92 27.54 6 NA NA NA 562 NA
MHR1-SH 120/208-240 9.0 24.96 12.81 3 NA NA NA 420 NA
MHR2-SH 120/208-240 16.0 51.92 27.54 6 NA NA NA 562 NA
GLASS DOORS
MHR1-G 120/208-240 9.0 24.96 12.81 3 NA NA NA 430 NA
MHR2-G 120/208-240 16.0 51.92 27.54 6 NA NA NA 582 NA
MHR1-GH 120/208-240 9.0 24.96 12.81 3 NA NA NA 430 NA
MHR2-GH 120/208-240 16.0 51.92 27.54 6 NA NA NA 582 NA

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Printed in the USA.
08/03
DSMRH