Delfield MFSC General Manual

PROJECT

ITEM #

QUANTITY

 

DATE

APPROVAL

MFSC

Built-in self contained milk or beverage dispensers

Short form specifications

The exterior sides and top edge shall be 20-gauge galvanized steel.

Exterior bottom to be 14-gauge galvanized steel.

Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.25” (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a nonconductive breaker strip.

Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles.

(1) stainless steel louver shall be provided for installation in the cabinet to allow proper airflow to the condensing unit. Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable

platform carriers constructed of 18-gauge stainless steel.

Model MFSC-31

Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion value. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature with lids closed for storage. Refrigeration system shall be controlled by a pressure control, located near the condensing unit.

Electrical connections shall be 115 volt, 60 cycle, and single phase. Unit shall have a 9’ (2.7m) long electrical cord and NEMA 5-15P installed at the mechanical end.

THE FOLLOWING APPLIES TO MODELS MFSC-2821, MFSC-31, MFSC-44 AND MFSC-57 ONLY:

(6) anodized aluminum divider trays will be supplied per opening. NOTE: See chart on back for milk storage capacity.

Optional Accessories & Modifications

• Lid locking device

• Wire baskets (not available on MFSC-2020)

• Lexan® covers

• Special voltages (contact factory)

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

Delfield MFSC General Manual

MFSC

Built-in self contained milk or beverage dispensers

43.25”

28.50”

42.00”

109.85cm

72.39cm

106.68cm

29.25”

14.50”

28.00”

74.29cm

36.83cm

71.12cm

26.68”

 

26.68”

67.77cm

 

67.77cm

 

 

 

 

 

PLAN VIEW MODELS MFSC-2020

PLAN VIEW

 

PLAN VIEW MODELS MFSC-31

 

 

MODELS MFSC-2821

 

28.25”

71.75cm

RIGHT END VIEW

ELEVATION VIEW

ELEVATION VIEW

 

 

 

 

 

ELEVATION VIEW

MODEL MFSC-2020

MODEL MFSC-2020

MODEL MFSC-2821

 

69.00”

 

MODEL MFSC-31

55.50”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

140.97cm

41.50”

 

 

 

 

 

 

175.3cm

 

55.50”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

105.4cm

 

 

 

 

 

 

 

 

 

 

 

140.97cm

 

 

 

 

 

26.68”

 

 

 

 

 

 

 

 

 

 

 

 

26.68”

 

 

67.77cm

 

 

 

 

 

 

 

 

 

 

 

 

67.77cm

PLAN VIEW MODELS MFSC-57

PLAN VIEW MODELS MFSC-44

28.25”

71.75cm

28.25”

71.75cm

INSTALLATION NOTE:

Refrigeration system is designed so that air will low into the compressor area through the provided louver. Any restriction to this air low path will void the warranties.

RIGHT END VIEW MODEL MFSC-2821, MFSC-31, MFSC-44, & MFSC-57

12.50”

31.8cm

LID OPENING DETAIL MODELS MFSC-2821, MGSC-31, MFSC-44 &

MFSC-57

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELEVATION VIEW MODELS MFSC-44

 

 

 

 

 

 

 

ELEVATION VIEW

 

 

 

MODELS MFSC-57

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODEL

CUT OUT

 

 

HORSE

 

 

 

 

 

 

BTU

SHIP

 

NUMBER

DIMENSIONS(LxD)

CAPACITY

 

POWER

 

 

 

 

AMPS

BTU LOAD

CAPACITY

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MFSC-2020

(1) 25.25” x 22.25”

n/a

 

1/4

 

 

 

 

5.0

300

1225

303lbs

 

 

(1) 64.1cm x 56.5cm

 

 

 

 

 

 

 

 

 

 

137kg

 

MFSC-2821

(1) 10.75 x 21.00”

126 half pint

 

1/4

 

 

 

 

5.0

260

1170

267lbs

 

 

(1) 27.3cm x 53.3cm

cartons

 

 

 

 

 

 

 

 

 

121kg

 

MFSC-31

(2) 10.75 x 21.00”*

252 half pint

 

1/4

 

 

 

 

5.0

300

1210

306lbs

 

 

(2) 27.3cm x 53.3cm*

cartons

 

 

 

 

 

 

 

 

 

139kg

 

MFSC-44

(3) 10.75 x 21.00”*

378 half pint

 

1/4

 

 

 

 

5.0

410

1350

413lbs

 

 

(3) 27.3cm x 53.3cm*

cartons

 

 

 

 

 

 

 

 

 

187kg

 

MFSC-57

(4) 10.75 x 21.00”*

504 half pint

 

1/4

 

 

 

 

5.0

520

1450

461lbs

 

 

(3) 27.3cm x 53.3cm*

cartons

 

 

 

 

 

 

 

 

 

209kg

*requires 2.75 (7.0cm) between each cutout

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

MSMFSC 05/02

Loading...