Delfield MFR1-SH, MFR2-SH, MFR1R-S, MFR2-S, MFR2R-S Specifications
...
MERIDIAN SERIES
®
Solid Door Reach In Freezers
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
MODELS:
MFR1-S Single section MFR2-S Two section MFR3-S Three section
Full height door Full height doors Full height doors
MFR1R-S Remote MFR2R-S Remote MFR3R-S Remote
MFR1-SH Single section MFR2-SH Two section MFR3-SH Three section
Half height door Half height doors Half height doors
MFR1R-SH Remote MFR2R-SH Remote MFR3R-SH Remote
STANDARD FEATURES
MFR1-S
Optional fourth shelf and
left-hand hinging.
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with minimal
energy cost
• Exterior digital thermometer with high/low temperature
alarm
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters
MERIDIAN SERIES
®
SOLID DOOR REACH IN FREEZERS
SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum.
Facing of shroud shall be easily removable without
the use of tools. Cabinet interior shall be anodized
aluminum. Bottom & top of liner shall be die-stamped
to provide radius corners and a recessed bottom. Base
shall be fully insulated with high-density foamed in
place polyurethane.
Interior: Shall have three epoxy-coated wire shelves
per door section. Shelf support pilasters shall be
heavy-duty with shelves adjustable at 1.0” (2.5 cm)
increments. Units are mounted on 6” (15.24cm) metal
legs.
Doors: Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density foamed
in place polyurethane. Each door shall have two
self-closing, cam-lift style hinges. Doors shall be easily
removable without use of tools. Door gaskets shall be
magnetic snap-in style to allow simple replacement. Door
handles shall be recessed.
• Specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Freezers: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one
piece. Environmentally friendly R404A refrigerant is
used. System has the capability of maintaining between
-5˚F and 0˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive
thermostatic expansion valve. Evaporator defrost is
automatic using a time initiated, time/temperature
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
terminated system with electric heaters. Evaporator
condensate is eliminated using an energy efficient hot
gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight feet (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
Approval _________________
Date ____________________
Meridian Series® Solid Door Reach-In Freezers
34”
86.4cm
29”
73.7cm
34”
86.4cm
56”
142.2cm
34”
86.4cm
83”
210.8cm
Model #__________
CSI Section 11400
12.14”
30.8cm
34.0”
86.4cm
PLAN VIEW MFR1-S
81”
205.7cm
58”
147.3cm
25”
63.5cm
DOOR CLEARANCE DETAIL
ALL MODELS
27.25”
69.2cm
PLAN VIEW MFR2-S
52”
132.1cm
MECHANICAL DETAIL
PLAN VIEW MFR3-S
79”
200.7cm
ELEVATION VIEW MFR3-SELEVATION VIEW MFR2-SELEVATION VIEW MFR1-S
3.80”
9.7cm
26.48”
67.6cm
6.00
15.2cm
56.76”
144.8cm
24.02”
61.0cm
27.75”
70.5cm
31.75”
80.7cm
END SECTION VIEW
ALL MODELS
PERSPECTIVE VIEW
ALL MODELS
MECHANICAL DATA
SHELVES NO UNIT BTU/HR SYSTEM SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. CAP WEIGHT PLUG
FREEZERS
MFR1-S 115 9.0 24.96 12.81 3 1/2 1516 396 5-15P
MFR1-SH 115 9.0 24.96 12.81 3 1/2 1516 396 5-15P
MFR2-S 115 14.9 51.92 27.54 6 3/4 3326 696 5-20P
MFR2-SH 115 14.9 51.92 27.54 6 3/4 3326 696 5-20P
MFR3-S 115/208-230 11.6 78.89 42.27 9 1 4136 930 —
MFR3-SH 115/208-230 11.6 78.89 42.27 9 1 4136 930 —
Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.
REMOTE SHELVES NO UNIT BTU/HR SYSTEM SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P.* CAP WEIGHT PLUG
FREEZERS
MFR1R-S 115 10.1 24.96 12.81 3 1/2 — 396 —
MFR1R-SH 115 10.1 24.96 12.81 3 1/2 — 396 —
MFR2R-S 115 9.0 51.92 27.54 6 3/4 — 696 —
MFR2R-SH 115 9.2 51.92 27.54 6 3/4 — 696 —
MFR3R-S 115 12.4 78.89 42.27 9 1 — 930 —
MFR3R-SH 115 13.2 78.89 42.27 9 1 — 930 —
*Recommended
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Printed in the USA.
03/07
DSMR_F
Loading...