Delfield F5MR72N General Manual

			Project __________________________________
			Item ____________________________________
F5 Serview Drop In			Quantity ________________________________
			CSI Section 11400
			Approved _______________________________
24” Deep Mirrored Remote Refrigerated Display Cases			Date ____________________________________
Models
•	F5MR48N	24” deep remote drop in display section
•	F5MR72N	24” deep remote drop in display section

	Standard Features
	• Display exterior sides are made of 18-gauge
		stainless steel
	• Galvanized steel reinforced ABS plastic interior
		sides with molded shelf supports
	• (4) adjustable epoxy coated wire shelves
	• On/off switch for the display section light(s)
	• Top mount coil with multiple fans circulating
		the air throughout the cabinet
	• Display section runs off a thermostatic control
	•	Sliding and removable self-closing 0.50”
		thick argon filled, low-E, warm edge insert,
		thermopane glass doors with left and right
		vertical gasket
	•	High density environmentally			friendly,
		Kyoto Protocol Compliant, Non ODP (Ozone
	F5MR72N	Depletion	Potential),	Non GWP	(Global
		Warming	Potential)	polyurethane foam
		throughout unit

•Single service display section with mirrored back

•Environmentally friendly HFC-404A refrigerant

•One year parts and 90 day labor standard warranty

Options &

Accessories

•48” shelf (48” long units only)

•72” shelf (72” long units only)

•Stainless steel back

•Laminate ends

•220 volt/50 cycle - inclusion of this option will alter specifications

Specifications

Display section exterior sides are made of 18-gauge stainless steel. Exterior display section top to be 22-gauge galvanized metal. Interior sides are made of galvanized steel reinforced 0.095” thick ABS plastic with molded shelf supports. The interior bottom is constructed with stainless steel for long lasting durability. Display section is fully insulated with high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam between the interior and exterior. (4) Adjustable epoxy coated wire shelves are provided for the display section. An on/off switch for the display section light(s) is located at the right end of the front facing, above the display section doors.

Display case refrigeration system consists of a full-length top mounted evaporator coil with multiple fans circulating the air throughout the cabinet utilizing a thermostatic control. Refrigeration lines are piped to a single point connection with expansion valve. An ABS plastic drip pan is placed below the coil with a clear drain hose for running the condensation to the lower base mechanical section.

Front of the display section is equipped with two sliding and

removable self-closing 0.50” thick argon filled, low-e glass doors with a warm edge spacer. The vertical outsides of each door tuck into an extruded channel running vertically up each side. Front nosing to be stainless steel.

Refrigeration system components are HFC-404A. Display cabinet blower coil assembly shall have a coated evaporator coil and fans. Interior refrigerated base cabinet and display section to maintain 36˚F to 40˚F temperatures at 100˚F ambient room temperature. Electrical connections are 115V- 60H-1PH; unit must be hard wired to a junction box.

Back has 2” thick panel, constructed on 22-gauge stainless steel interior, 2” of high-density polyurethane foam and 22gauge galvanized steel exterior. Interior of back panel has (2) angled glass mirrors.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981
	Mt. Pleasant, Michigan 48858		www.delfield.com
		Fax: [phone]

<![if ! IE]>

<![endif]>Cases Display Refrigerated Remote Mirrored Deep 24” In: Drop Serview F5

<![if ! IE]>

<![endif]>F5 Serview Drop In 24” Deep Mirrored Remote Refrigerated Display Cases

26.00”		6.50”	26.00”
	26.00”	17cm	66cm
66cm	66cm

Plan View F5MR48N				Plan View F5MR72N
	48.00”
	122cm				72.00”
					183cm
							42.00”
							107cm

24.00”

61cm

Elevation View F5MR48N

Elevation View F5MR72N

Right End View

F5MR48N, F5MR72N

		1.75"
		4cm
		Cutout	3.75"
		3.00" x 12.00"	9.5cm
			15.00"
		(7.6cm x 30.5cm)
			38cm
		Centered
	J=Junction Box		R
		Front To Back
	R=Refrigeration		D
	Lines, 1/4" Liquid,	0.25"(0.6cm)	J
	3/8" Suction	From End	3.75"
	D=1/2" I.D. Drain		9.5cm

Front Of Unit

Mechanical Access

Remote Models

Specifications

Model		Shelf	Storage	H.P.*	Evap Cap	Cabinet Load	V/Hz/Ph	Amps	Nema	Ship Weight
		Area	Capacity		BTU/˚TD	BTU/Hour			Plug
F5MR48N		18.8ft2	14.3ft3	1/2	150	1150	115/60/1	4.0	NA	390lbs/177kg
F5MR72N		29.2ft2	22.2ft3	3/4	450	1700	115/60/1	4.0	NA	535lbs/242kg
* Recommended

Delield reserves the right to make changes to the design or speciications without prior notice.

980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	Printed in the U.S.A.
Mt. Pleasant, Michigan 48858	Fax: [phone]	DSF5MRN
	www.delfield.com	03/10