Delfield F18VD50 User Manual

F18VD

Component Crafted Versa Drawer™

Models

• F18VD50 50” Versa Drawer with (2) 32” drawers

• F18VD82 82” Versa Drawer with (4) 32” drawers

• F18VD50-CE 50” Versa Drawer with (2) 32” drawers, CE approved

• F18VD82-CE 82” Versa Drawer with (4) 32” drawers, CE approved

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

F18VD: Component Crafted Versa Drawer™

F18VD82

Specifications

Exterior Top: Constructed of one-piece heavy-gauge stainless

steel with integral 2.12” (5.4cm) high square nosing at front

and 2” (5.1cm) x 4” (10.2cm) backsplash at rear.

Exterior Sides, Back and Bottom: Heavy-gauge stainless

steel side with removable stainless steel mechanical access

panel on compressor end. Back, bottom and drawer end are

constructed of galvanized steel.

Interior of each drawer section is a polyethylene rotocast liner

with ABS drawer front liners

Drawers: Heavy-gauge stainless steel exterior front, with a

thermoformed ABS plastic interior liner. Frame and tracks are

constructed of 11 and 12-gauge stainless steel. Roller track

assemblies have self-lubricating Delrin™ rollers.

Refrigeration System: Environmentally friendly HFC-404A

refrigerant. Each independent drawer has it’s own evaporator

coil with expansion valve. Digital control acts as thermometer,

thermostat and diagnostic center for each drawer. Hot gas

defrost system is also utilized during thaw operation.

Electrical Connections: Two electrical configurations are

Standard Features

• 4 temperature operation-each drawer is completely independent and can operate as a refrigerator, freezer, chiller or thaw cabinet at any time

• Easy to use microprocessor control with push button function selection

• HACCP electronic record keeping, alarm notifications, and service diagnostics

• Heavy-gauge stainless steel top with 2”x4” backsplash is standard

• Standard on 6” adjustable legs

• Mechanical access on compressor end of

unit

• 32” heavy duty full extension drawers with (2) 12”x20” pan capacity per drawer

• NSF 7 certified

• High density environmentally friendly,

Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout

• Dart style quick change gaskets

• 8’ long electrical cord

• Environmentally friendly HFC-404A

available: 115 volt, 60 Hertz, single phase and 230 volt, 50

Hertz, single phase. Unit is wired to a J-box and must be

hardwired to the power source in the field.

Installation: Units built into chef counters or production

centers must accommodate 24” of clearance on compressor

end for service access.

The Delfield Versa Drawer is a unique food holding device

that includes an open food container disposed within a

refrigerated cabinet such that both the container and

interior of the cabinet are exposed to the same refrigerated

environment, thereby eliminating the need for conventional

dual environment systems which refrigerate food disposed

within insulated, closed containers, while maintaining the

interior of the cabinet at ambient temperature.

refrigerant

• One year parts, one year labor and 5 year compressor warranty

Options & Accessories

• Casters

• 34” ADA height

• Overstructures

• Stainless steel end

Only Models F18VD50-CE & F18VD82-CE

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

www.delfield.com

32.00”

(81cm)

50.00”

(127cm)

18.00”

(46cm)

64.00”

(163cm)

82.00”

(208cm)

18.00”

(46cm)

Plan View

F18VD50, F18VD50-CE

32" Ref/Frz Drawer

Elevation View

F18VD50, F18VD50-CE

31.50”

(80cm)

Plan View

F18VD82, F18VD82-CE

32" Ref/Frz Drawer

Elevation View

F18VD82, F18VD82-CE

36.00”

(91cm)

123

31.50”

(80cm)

40.00”

(102cm)

7.62”

6.12”

(16cm)

Nema

Plug

End View

All Models

Ship Weight

lbs/kg

Specifications

Component Crafted Versa Drawer™

Model

Installation Note: Units built into chef counters or production centers must accommodate 24” of clearance on compressor end for service access.

32”

Drawers

12”x20”

Pans

H.P. V/Hz/Ph Amps

(19cm)

F18VD50 2 4 1/3 115/60/1 6.0 5-15 520/236 1.50*/4.01**

F18VD82 4 8 (2) 1/3 115/60/1 12.0 5-15 720/327 3.0*/8.02**

F18VD50-CE 2 4 1/3 230/50/1 3.6 BS1373 520/236 1.50*/4.01**

F18VD82-CE 4 8 (2) 1/3 230/50/1 7.2 BS1373 720/327 3.0*/8.02**

*All drawers refrigerators ** All drawers freezers

F18VD

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. DSF18VD 12/11

Energy

KWH/Day