Delfield F17OS48, F170S72, F170S84, F170S96 General Manual

	Project __________________________________
	Item ____________________________________
	Quantity ________________________________
F17OS	CSI Section 11400
	Approved _______________________________
	Date ____________________________________

Open Shelf Equipment Stands

Models

•F17OS36 Open shelf equipment stand 36” in length

•F17OS48 Open shelf equipment stand 48” in length

•F170S60 Open shelf equipment stand 60” in length

•F170S72 Open shelf equipment stand 72” in length

•F170S84 Open shelf equipment stand 84” in length

•F170S96 Open shelf equipment stand 96” in length

		Standard Features
		•	Top is 18-gauge stainless steel, with
			integral front marine edge
		• Standard heavy duty units have unfinished
			ends
		•	14-gauge cutting board brackets with
			1.25” thick x 9” deep maple cutting board
		•	14-gauge leg rails that run the entire
			length of the unit
		•	Base sides are constructed of 18-gauge
			stainless steel with double hemmed bends
			for additional strength
		•	Two pieces of 14-gauge U-channel are
			welded and glued under the top for
F17OS48
			strength and sound deadening
		•	6.12” adjustable full stainless steel legs
			and bullet feet
		• One shelf constructed of stainless steel
			with double hemmed nosing are spot
			welded between the sides and supported
			with two 14-gauge U-channels with sound

deadening adhesive

•When ordering, specify make, model, and depth of cooking equipment sitting on equipment stand

•Height of surface for setting equipment is 25.50” for open shelving and 22.41” for dry drawer units with a cutting board height of 37.50” on both

•One year parts and 90 day labor standard warranty.

Options &

Accessories

•Stainless steel back

•Stainless steel end

•Laminate back

•Laminate end

•Casters

Specifications

Top is constructed of 18-gauge stainless steel, with integral front marine edge nosing and rear backsplash. Spline bars are made of 12-gauge stainless steel and run front to back on both the left and right stainless steel sides for support and spline purposes. Two pieces of 14-gauge U-channel are welded and glued with construction adhesive to the under side of the top for strength and sound deadening. As a standard, 16-gauge cutting board brackets are attached to each side and house a 1.25” thick x 9.5” deep maple cutting board.

Base is constructed of 18-gauge stainless steel sides. One bottom shelf constructed of 22-gauge stainless steel with double hemmed nosing is spot welded between the sides and braced for extra support.

Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are

welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 6.12” adjustable legs are mounted as standard with (4) 5/16” bolts.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981
	Mt. Pleasant, Michigan 48858		www.delfield.com
		Fax: [phone]

<![if ! IE]>

<![endif]>Stands Equipment Shelf Open F17OS:

<![if ! IE]>

<![endif]>F17OS Open Shelf Equipment Stands

30.74"

78cm

9.50"

24cm

Plan View

All Models

36.00”		48.00”		60.00”			72.00”
91cm		122cm		152cm			183cm
					10.50"
					27cm
14.60" Open Shelf	14.60"	Open Shelf	14.60"	Open Shelf	14.60"	Open Shelf	Open Shelf
37cm	37cm		37cm		37cm

Elevation View

Elevation View

Elevation View

Elevation View

F17OS36

F17OS48

F17OS60

F17OS72

84.00”

96.00”

NOTE: Inside Shelf

213cm

244cm

Width Is 2" Less Than

10.50"

10.50"

Overall Length

27cm

27cm

14.60"

Open Shelf

Open Shelf

14.60"

Open Shelf

Open Shelf

37cm

37cm

Elevation View

Elevation View

F17OS84

F17OS96

28.7"

10.50”

73cm

27cm

36.00"

37.25”

95cm

91cm

25.50"

25.25"

65cm

64cm

7.62"

6.12"

19cm

16cm

End View

All Models

Specifications

Model

Number of Shelves

Shelf Sq. Ft.

Model Length

Ship Weight

F17OS36

1

5.95

36.00” / 91cm

200lbs/ 91kg

F17OS48

1

8.00

48.00” / 122cm

250lbs/ 113kg

F170S60

1

10.15

60.00” / 152cm

300lbs/ 136kg

F170S72

1

12.25

72.00” / 183cm

350lbs/ 159kg

F170S84

1

14.36

84.00” / 213cm

400lbs/ 181kg

F170S96

1

16.46

96.00” / 244cm

475lbs/ 215kg

Delield reserves the right to make changes to the design or speciications without prior notice.

980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	Printed in the U.S.A.
Mt. Pleasant, Michigan 48858	Fax: [phone]	DS17OS
	www.delfield.com	03/09