Delfield DIS-1013-QT User Manual

Shelleymatic

by Deleld

DIS

Drop-In Dish Dispensers

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

DIS: Drop-In Dish Dispensers

Model

Even Temp Heating Models

Quick Temp Heating Models

Description

•DIS-500 •DIS-500-ET Stacks 3.00”-5.00” diameter dishes

•DIS-575 •DIS-575-ET Stacks 5.00”-5.75” diameter dishes

•DIS-650 •DIS-650-ET Stacks 5.75”-6.50” diameter dishes

•DIS-725 •DIS-725-ET Stacks 6.50”-7.25” diameter dishes

•DIS-813 •DIS-813-ET •DIS-813-QT Stacks 7.25”-8.12” diameter dishes

•DIS-913 •DIS-913-ET •DIS-913-QT Stacks 8.12”-9.12” diameter dishes

•DIS-1013 •DIS-1013-ET •DIS-1013-QT Stacks 9.12”-10.12” diameter dishes

•DIS-1200 •DIS-1200-ET •DIS-1200-QT Stacks 10.12”-12.00” diameter dishes

•DIS-1450 •DIS-1450-ET •DIS-1450-QT Stacks 12.00”-14.50” diameter dishes

DIS-650

Standard Features

• Top flange, bottom brace and vertical side channels are stainless steel

• Flange, channels and bottom to be integrally welded

• Spring supports to be stainless steel

• Carrier head made of welded rods with a

removable top plate

• Self-leveling mechanism, field adjustable by adding or removing springs

• High impact plastic guide posts mounted to flange

• One year parts and 90 day labor standard warranty

DIS-ET/QT Series Only

• 4’ cord and plug

• Convection heating module and fan motor

• Filtered air intake

• On/off switch and adjustable thermostat

• Outer stainless steel jacket

• QT- Shall have a stainless steel cover

• ET temperature range is 120-140°F (49-60°C)

• QT temperature range is 150-170°F (66-77°C)

Options & Accessories

• Shorten dispenser tubes to special length

• Stainless steel outer jacket for dispenser tubes-non-heated (standard on ET or QT)

• 12.00” (30cm) dia. stainless steel dish dispenser tray (DIS-1200, DIS-1200-ET and DIS-1200-QT only)

• Non-marring adjustment rods for oval dishes and various dish diameters (813–1450 sizes only)

• Stainless steel dome cover with access to dishes (813-1450 sizes only; standard on QT models)

• Stainless steel tube cover (500-725 sizes only)

• Hold-down rod for dispenser tubes

• Special voltages

Specifications

Dispenser tube shall have three vertical side channels,

bottom brace and top supporting flange of stainless steel.

Flange, channels and bottom brace shall be integrally welded

together. Flange shall have 3 guide posts molded from high

impact plastic.

Self-leveling mechanism shall be field adjustable by adding

or removing stainless steel extension springs on perimeter of

vertical side channels. The dish carrier head shall be stainless

steel welded rods with a removable stainless steel top plate.

Tube shall suspend in a 28.00” (71cm) high space.

Capacity of tubes shall be approximately 72 dishes, with a

maximum stacking height of 24.00” (61cm).

DISET even temp heated dispensers have a stainless steel

outer jacket. Unit shall be supplied with 4’0” (1.2m) cord and

NEMA 5-15P plug. Electrical connections shall be 120 volt, 60

hertz, single phase.

The tube shall have its own convection heating module

consisting of a single 700 watt heating element and fan motor,

located in the center of the interior bottom cavity. Air intake

has a filter. The tube shall have an adjustable thermostat inside

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

the motor housing and an ON/OFF switch on one of the dish

guide posts. Unit requires a minimum of 1” (2.5cm) clearance

at bottom for air circulation. Unit shall maintain temperature

between 120°F–140°F (49°C–60°C).

DIS-QT quick temp heated dispensers have a stainless steel

outer jacket and cover. Unit shall be supplied with 4’ (1.2m)

cord and NEMA 5-15P plug. Electrical connections shall be 120

volt, 60 hertz, single phase.

The tube shall have its own convection heating module

consisting of a single 700 watt heating element and fan motor,

located in the center of the interior bottom cavity. Air intake

shall have a filter. The tube shall have an adjustable thermostat

inside the motor housing and an ON/OFF switch on one of

the dish guide posts. Unit requires a minimum of 1” (2.5cm)

clearance at bottom for air circulation. Unit shall maintain

temperature between 150°F–170°F (66°C–77°C).

www.delfield.com

Shelleymatic

by Deleld

Flange Diameter

Plan View

DIS Models

Elevation View

DIS Models

Model Flange Diameter Cutout Diameter Dish Diameter Range V/Hz/Ph Amps

DIS-500 8.37” (21cm) 7.75” (20cm) 3.00” - 5.00” (8cm - 13cm) NA NA NA 8lbs/4kg

DIS-575 9.12” (23cm) 8.50” (22cm) 5.00” - 5.75” (13cm - 15cm) NA NA NA 9lbs/4kg

DIS-650 9.87” (25cm) 9.25” (23cm) 5.75” - 6.50” (15cm - 17cm) NA NA NA 9lbs/4kg

DIS-725 10.62” (27cm) 10.00” (25cm) 6.50” - 7.25” (17cm - 18cm) NA NA NA 10lbs/5kg

DIS-813 11.50” (29cm) 10.87” (28cm) 7.25” - 8.12” (18cm - 21cm) NA NA NA 11lbs/5kg

DIS-913 12.50” (32cm) 11.87” (30cm) 8.12” - 9.12” (21cm - 23cm) NA NA NA 12lbs/5kg

DIS-1013 13.50” (34cm) 12.87” (33cm) 9.12” - 10.12” (23cm - 26cm) NA NA NA 13lbs/6kg

DIS-1200 15.37” (39cm) 14.75” (37cm) 10.12” - 12.00” (26cm - 30cm) NA NA NA 14lbs/6kg

DIS-1450 17.87” (45cm) 17.25” (44cm) 12.00” - 14.50” (30cm - 37cm) NA NA NA 17lbs/8kg

DIS-500-ET 8.37” (21cm) 7.75” (20cm) 3.00” - 5.00” (8cm - 13cm) 120/60/1 5.5 5-15P 19lbs/9kg

DIS-575-ET 9.12” (23cm) 8.50” (22cm) 5.00” - 5.75” (13cm - 15cm) 120/60/1 5.5 5-15P 20lbs/9kg

DIS-650-ET 9.87” (25cm) 9.25” (23cm) 5.75” - 6.50” (15cm - 17cm) 120/60/1 5.5 5-15P 21lbs/10kg

DIS-725-ET 10.62” (27cm) 10.00” (25cm) 6.50” - 7.25” (17cm - 18cm) 120/60/1 5.5 5-15P 23lbs/10kg

DIS-813-ET 11.50” (29cm) 10.87” (28cm) 7.25” - 8.12” (18cm - 21cm) 120/60/1 5.5 5-15P 25lbs/11kg

DIS-913-ET 12.50” (32cm) 11.87” (30cm) 8.12” - 9.12” (21cm - 23cm) 120/60/1 5.5 5-15P 27lbs/12kg

DIS-1013-ET 13.50” (34cm) 12.87” (33cm) 9.12” - 10.12” (23cm - 26cm) 120/60/1 5.5 5-15P 29lbs/13kg

DIS-1200-ET 15.37” (39cm) 14.75” (37cm) 10.12” - 12.00” (26cm - 30cm) 120/60/1 5.5 5-15P 32lbs/15kg

DIS-1450-ET 17.87” (45cm) 17.25” (44cm) 12.00” - 14.50” (30cm - 37cm) 120/60/1 5.5 5-15P 37lbs/17kg

DIS-813-QT 11.50” (29cm) 10.87” (28cm) 7.25” - 8.12” (18cm - 21cm) 120/60/1 5.5 5-15P 30lbs/14kg

Drop-In Dish Dispensers

DIS-913-QT 12.50” (32cm) 11.87” (30cm) 8.12” - 9.12” (21cm - 23cm) 120/60/1 5.5 5-15P 32lbs/15kg

DIS-1013-QT 13.50” (34cm) 12.87” (33cm) 9.12” - 10.12” (23cm - 26cm) 120/60/1 5.5 5-15P 34lbs/15kg

DIS-1200-QT 15.37” (39cm) 14.75” (37cm) 10.12” - 12.00” (26cm - 30cm) 120/60/1 5.5 5-15P 37lbs/17kg

DIS-1450-QT 17.87” (45cm) 17.25” (44cm) 12.00” - 14.50” (30cm - 37cm) 120/60/1 5.5 5-15P 41lbs/19kg

3.62" 9cm

28.00" 71cm

Flange Diameter

Plan View

DIS-ET & DIS-QT Models

Elevation View

DIS-ET & DIS-QT Models

3.62"

Nema Plug

9cm

28.00" 71cm

Ship Weight

Note: Optional adjusting rods are available on 813–1450 models and installed by factory only. They reduce the maximum round dish

diameter by 1.25” (3cm). The rods can be adjusted to decrease the diminished maximum round dish diameter by 1.50” (4cm).

DIS

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. DSDIS 04/12