Delfield 8118-EF Installation Manual

Drop Ins
N8000, N8000-R, N8100B, N8100-BR, 8100-EF, N8100-FA, N8200, N8200-ST, N8200G, N8600, N8700-D, N8700-DESP, N8700-R, N8800
Original Instructions Installation, Operation and Maintenance Manual
This manual is updated as new information and models are released. Visit our website for the latest manual.
Part Number: 9291458 12/15
Important Warning And Safety Information
WARNING Read This Manual Thoroughly Before Operating, Installing, Or Performing Maintenance On The Equipment.
WARNING Failure To Follow Instructions In This Manual Can Cause Property Damage, Injury Or Death.
WARNING Do Not Store Or Use Gasoline Or Other Flammable Vapors Or Liquids In The Vicinity Of This Or Any Other
Appliance.
WARNING Unless All Cover And Access Panels Are In Place And Properly Secured, Do Not Operate This Equipment.
WARNING This Appliance Is Not Intended For Use By Persons Who Lack Experience Or Knowledge, Unless They Have
Been Given Supervision Or Instruction Concerning Use Of The Appliance By A Person Responsible For Their Safety.
WARNING This Appliance Is Not To Be Played With.
WARNING Do Not Clean With Water Jet.
WARNING Do Not Use Electrical Appliances Inside The Food Storage Compartment Of This Appliance.
CAUTION Observe the following:
Minimum clearances must be maintained from all walls and combustible materials.
Keep the equipment area free and clear of combustible material.
Allow adequate clearance for air openings.
Operate equipment only on the type of electricity indicated on the specification plate.
Unplug the unit before making any repairs.
Retain this manual for future reference.
2
Contents
Receiving And Inspecting Unit ................................................ 3
Serial Number Location .......................................................... 4
Warranty Information .............................................................. 4
Regulatory Certications ........................................................ 4
Specications ...................................................................... 5-9
Curved Drop-In Cutout Details ............................................. 10
Installation ....................................................................... 11-13
Operation ......................................................................... 14-18
Maintenance ......................................................................... 19
Receiving And Inspecting The Equipment
Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building.
1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported to the delivering carrier immediately.
2. If damaged, open and inspect the contents with the carrier.
3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier. Notication should be made verbally as well as in written form.
4. Request an inspection by the shipping company of the damaged equipment. This should be done within 10 days from receipt of the equipment.
5. Also open the compressor compartment housing and visually inspect the refrigeration package. Be sure lines are secure and base is still intact.
6. Freight carriers can supply the necessary damage forms upon request.
7. Retain all crating material until an inspection has been made or waived.
Uncrating The Equipment
First cut and remove the banding from around the crate. Remove the front of the crate material, use of some tools will be required.
3
Serial Number Location
The serial number on self-contained refrigerated units is on the electrical specications tag located near the condensing unit.
The serial number on remote refrigerated units is on the outside bottom of the food well.
On hot food pans and hot/cold combination pans, the serial number tag is located on the back of the control raceway or remote panel.
The serial number tag also lists the refrigerant used and the amount of charge.
Always have the serial number of your unit available when calling for parts or service.
This manual covers only standard 8000 series units. If you have a custom designed unit, you should contact our parts/service department at (800) 733-8829 for questions.
©2015 The Deleld Company. All rights reserved. Reproduction without written permission is prohibited. “Deleld” is a registered trademark of The Deleld Company.
Warranty Information
Visit http://www.deleld.com/minisite/service/warranty_info to:
• Register your product for warranty.
• Verify warranty information.
• View and download a copy of your warranty.
Regulatory Certications
All Models are certified by:
National Sanitation Foundation (NSF)
Electrical Models are also certified by:
Underwriters Laboratories (UL) Underwriters Laboratories of Canada (CUL)
N8700DESP Models are also certified by:
European Conformity Technical Inspection Association
4
Specications
N8100B Series Self-Contained Mechanically Cooled Pans - R404A
Model
N8118B
N8130B
N8143B
N8156B
N8169B
N8181B
L D H
18” (45.7cm)
30.75” (78.1cm)
43.5” (110.5cm)
56.25” (142.9cm)
69” (175.3cm)
81.75” (208cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
21.87” (55.5cm)
21.87” (55.5cm)
21.87” (55.5cm)
21.87” (55.5cm)
21.87” (55.5cm)
21.87” (55.5cm)
Counter Cutout Dimensions V/Hz/Ph Amps H.P. BTU
17” X 25” (43.2cm x 63.5cm)
29.75” x 25” (75.6cm x 63.5cm)
42.50” X 25” (108.6cm x 63.5cm)
55.25” x 25” (140.3cm x 63.5cm)
68” X 25” (172.7cm x 63.5cm)
80.75” x 25” (205.1cm x 63.5cm)
115/60/1
115/60/1 3.7 1/5 379
115/60/1
115/60/1 5.6 1/4 758
115/60/1 7.3 1/3 948
115/60/1 7.3 1/3 1138
3.7 1/5 204
3.7 1/5 569
N8100NB Series Self-Contained Mechanically Cooled Pans Narrow Style - R134A
N8146NB
N8168NB
46.75” (118.7cm)
67.5” (171.5cm)
18” (45.7cm)
18” (45.7cm)
21.81” (55.4cm)
21.81” (55.4cm)
45.75” x 17” (113.7cm x 43.2cm)
66.5” x 17” (168.9cm x 43.2cm)
115/60/1 4.0 1/5 454 17/40º/-5º 680 175lbs
115/60/1 4.0 1/5 676 26/31º/4º 804 240lbs
Evap BTU/ TD/TEMP
19/38º/-3º
26/31º/4°
35/26º/9º
43/32º/3º
51/29º/6º
59/32º/3º
Sys Cap
1010 100lbs
1298 140lbs
1298 173lbs
1961 205lbs
2088 225lbs
2088 258lbs
Ship Weight
(45kg)
(64kg)
(78kg)
(93kg)
(102kg)
(117kg)
(80kg)
(109kg)
Refrig.
NEMA
Charge
Plug
5-15P
8.0oz
8.0oz 5-15P 2
5-15P
8.0oz
16.0oz 5-15P 4
16.0oz 5-15P 5
11.5oz 5-15P 6
5-15P
8.0oz
8.0oz 5-15P 3
12”x20” Pans
1
3
2
N8100BR Series Curved Self-Contained Mechanically Cooled Pans - R134A
Model
N8144-BR
N8159-BR
N8176-BR
N8194-BR
L D H
40.43” (103cm)
57.22” (145cm)
73.68” (187cm)
89.86” (228cm)
26.05” (66cm)
26.05” (66cm)
26.05” (66cm)
26.05” (66cm)
21.81” (55cm)
21.81” (55cm)
21.81” (55cm)
21.81” (55cm)
Counter Cutout Dimensions V/Hz/Ph Amps H.P. BTU
see drawing on page 10
see drawing on page 10
see drawing on page 10
see drawing on page 10
115/60/1 4.0 1/5 379
115/60/1
115/60/1 7.0 1/4 758
115/60/1 8.0 1/3 948
7.0 1/4 569
Evap BTU/ TD/TEMP
26/31º/4°
35/26º/9º
43/32º/3º
51/29º/6º
N8100-FA Series Forced Air Drop-In Mechanically Cooled Cold Pans - R404A
Model L D H
N8131-FA
N8144-FA
N8157-FA
N8169-FA
N8182-FA
31.25” (79.4cm)
44” (111.8cm)
56.75” (144.1cm)
69.5” (176.5cm)
82.25” (208.9cm)
26.67” (67.7cm)
26.67” (67.7cm)
26.67” (67.7cm)
26.67” (67.7cm)
26.67” (67.7cm)
26.62” (68cm)
26.62” (68cm)
26.62” (68cm)
28.62” (72.7cm)
28.62” (72.7cm)
Counter Cutout Dimensions V/Hz/Ph Amps H.P. BTU
30.25” x 25.5” (76.8cm x 64.8cm)
43” x 25.5”
109.2cm x 64.8cm)
55.75” x 25.5” (141.6cm x 64.8cm)
68.5” x 25.5”
174.0cm x 64.8cm)
81.25” x 25.5”
206.4cm x 64.8cm)
115/60/1 7.8 1/4 1339 140/15º/20
115/60/1 9.2 1/2 2035 140/22º/13
115/60/1 9.2 1/2 2731 280/14º/21° 3806
115/60/1 14.8 3/4
115/60/1 14.8 3/4 4070 280/20º/15° 5545
Evap BTU/ TD/TEMP
º
º
3374 280/20º/15° 5545
Sys
Ship
Cap
Weight
812 161lbs
(72kg)
889 184lbs
(83kg)
1373 233lbs
(105kg)
1469 243lbs
(109kg)
Sys
Ship
Cap
Weight
168lbs
2154
(76kg)
175lbs
3142
(79kg)
225lbs (102kg)
235lbs (107kg)
406lbs (184kg)
Refrig.
NEMA
Charge
Plug
8.0oz 5-15P 2
16.0oz 5-15P
16.0oz 5-15P 4
11.5oz 5-15P 5
Refrig.
NEMA
Charge
Plug
16.0oz 5-15P 2
32.0oz 5-15P 3
32.0oz 5-15P 4
48.0oz 5-20P 5
48.0oz 5-20P 6
12”x20” Pans
3
12”x20” Pans
5
Specications
8100-EF Series LiquiTec® Eutetic Fluid Refrigerated Cold Pans - R404A
Model L D H
8118-EF
8132-EF
8145-EF
8159-EF
8172-EF
8186-EF
18.20” (46.2cm)
31.76” (80.7cm)
45.32” (115.1cm)
58.88” (149.6cm)
72.44” (184cm)
86” (218.4cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
23.25” (59.1cm)
23.25” (59.1cm)
23.25” (59.1cm)
23.25” (59.1cm)
23.25” (59.1cm)
23.25” (59.1cm)
Counter Cutout Dimensions V/Hz/Ph Amps H.P.
17” x 25” (43.2cm x 63.5cm)
30.75” x 25” (78.1cm x 63.5cm)
44.25” x 25” (112.4cm x 63.5cm)
57.87” x 25” (147cm x 63.5cm)
71.5” x 25” (181.6cm x 63.5cm)
85” x 25” (215.9cm x 63.5cm)
115/60/1 7.5 1/4 204 19/50º/-15° 928 169lbs
115/60/1 7.5 1/4 379 26/42º/-7° 1112 215lbs
115/60/1 7.5 1/4 569 35/36º/-1° 1259 265lbs
115/60/1 7.5 1/4 758 43/32º/3° 1373 285lbs
115/60/1 7.5 1/4 948 51/29º/6° 1469 295lbs
115/60/1 7.5 1/4 1138 59/26º/9° 1529 394lbs
8100-EFN Series LiquiTec® Slim Line Eutetic Fluid Refrigerated Cold Pans - R404A
Model L D H
8148-EFN
8169-EFN
8191-EFN
47.66” (121.1cm)
69.22” (175.8cm)
90.78” (230.6cm)
18” (45.7cm)
18” (45.7cm)
18” (45.7cm)
23.25” (59.1cm)
23.25” (59.1cm)
23.25” (59.1cm)
Counter Cutout Dimensions V/Hz/Ph Amps H.P.
46.88” x 17.25” (119.1cm x 43.8cm)
68.5” x 17.25” (174cm x 43.8cm)
90” x 17.25” (228.6cm x 43.8cm)
115/60/1 7.5 1/4 379 26/42º/-7° 1112 235lbs
115/60/1 7.5 1/4 569 35/36º/-1° 1259 285lbs
115/60/1 7.5 1/4 758 43/32º/13° 1373 295lbs
BTU Load
BTU Load
Evap BTU/ TD/TEMP
Evap BTU/ TD/TEMP
Sys Cap
Sys Cap
Ship Weight
(77kg)
(98kg)
(120kg)
(130kg)
(134kg)
(179kg)
Ship Weight
(107kg)
(130kg)
(134kg)
Refrig.
NEMA
Charge
Plug
24.0oz 5-15P 1
24.0oz 5-15P 2
24.0oz 5-15P 3
24.0oz 5-15P 4
24.0oz 5-15P 5
24.0oz 5-15P 6
Refrig.
NEMA
Charge
Plug
24.0oz 5-15P 2
24.0oz 5-15P 3
24.0oz 5-15P 4
12x20 Pans
12x20 Pans
N8000 Series Ice Cooled Cold Pans
Model
N8018
N8030
N8043
N8056
N8069
N8081
L D H
18” (45.7cm)
30.75” (78.1cm)
43.5” (110.5cm)
56.25” (142.9cm)
69” (175.3cm)
81.75” (208cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
26” (66cm)
10.75” (27.3cm)
10.75” (27.3cm)
10.75” (27.3cm)
10.75” (27.3cm)
10.75” (27.3cm)
10.75” (27.3cm)
Counter Cutout Dimensions
17” x 25” (43.2cm x 63.5cm)
29.75” x 25” (75.6cm x 63.5cm)
42.5” x 25” (107.9cm x 63.5cm)
55.25” x 25” (140.3cm x 63.5cm)
68” x 25” (172.7cm x 63.5cm)
80.75” x 25” (205.1cm x 63.5cm)
N8000N Series Narrow Ice Cooled Cold Pans
N8046N
N8068N
46.75” (118.8cm)
67.5” (171.5cm)
18” (45.7cm)
18” (45.7cm)
10.75” (27.3cm)
10.75” (27.3cm)
45.75” x 17” (116.2cm x 43.2cm)
66.50” x 17” (168.9cm x 43.2cm)
Ship Weight
38lbs (17kg)
84lbs (38kg)
110lbs (50kg)
139lbs (63kg)
160lbs (73kg)
197lbs (89kg)
100lbs (45kg)
120lbs (55kg)
12”x20” Pans Held
1
2
3
4
5
6
2
3
6
Loading...
+ 14 hidden pages