Delfield 4427N-6 User Manual
4427N Salad Top
Front-Breathing Self-Contained Salad Top Refrigerated
Bases
Models
• 4427N-6 Single section with doors, six pan capacity
• D4427N-6 Single section with drawers, six pan capacity
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
4427N Salad Top: Front-Breathing Self-Contained Salad Top Refrigerated Bases
4427N-6
Specifications
Exterior top is one-piece, 22-gauge stainless steel with
integral 2.12” (5.4cm) square nosing on the front. Top of
drawer unit has one opening to accept six 1/6-size 4” (10cm)
deep pans. Top of door unit has one opening to accept six
1/6-size 4” or 6” (10cm or 15cm) deep pans. Adapter bars
and 1/6 size pans are supplied by Delfield. Lid is constructed
of 20-gauge stainless steel. Temperature in top opening to
maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5”
(6.4cm) at 86°F ambient room temperature, meeting NSF 7
requirements. One 27” x 10” x .5” (68.6cm x 25.4cm x 1.3cm)
polyethylene cutting board treated with antimicrobial agent
is mounted on the top at the front edge.
Dual level pan brackets allow the pans to be lowered
an additional inch in the unit without tools to provide
additional pan temperature holding performance.
Exterior back and bottom are two-piece 24-gauge
galvanized steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with integral
shelf supports. Base is fully insulated with high-density
foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
Standard Features
• Patented air screen ensures product stays cold
without drying it out
• All 4400 Series units are 100% front breathing,
which allows the unit to be pushed against a
wall or built into a cabinet or an existing line up
• Durable, rugged stainless steel sides, top and
front
• Features Delfield’s exclusive ABS interior (on
sides). ABS is extremely durable - it won’t dent,
chip or corrode and is backed by a limited
lifetime warranty
• Delfield supplies 1/6 size pans and positive
placement adapter bars for top opening
• Dual level pan brackets allow the pans to be
lowered an additional inch in the unit without
tools to provide additional pan temperature
holding performance
• Salad top refrigerators are standard with 10”
wide, dishwasher safe polyethylene cutting
board treated with antimicrobial agent
• “D” prefix models feature Delfield’s new drawer
system. Drawers are backed by a 10-year
warranty on the track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
evaporator mounted on rear of the cabinet. Evaporator coil
is located on the interior rear wall of the cabinet. Refrigerant
flow is controlled by a capillary tube. Cabinet maintains an
interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control: ACT electronic, solid state control, mounted
on the exterior rear of the cabinet, allows unit to maintain
precise temperatures in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 5” (13cm) diameter plate
casters with front two locking. Equipment clearance above
the floor is 2.5” (6cm).
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer holds one full size 12”
x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pan, and three
1/6 size pans. Bottom drawer holds one full size 12 x 20"
and three 1/6 size 4" deep pans. Pans are supplied by others.
Warming Potential) polyurethane keeps
energy costs low
• Black recessed quick grip handle
• Standard on 5” casters for easy cleaning
and installation
• 6’ cord and plug supplied
• One epoxy coated wire shelf standard,
installed per door section
• ACT solid state electronic control
• One year parts and 90 day labor
standard warranty
Options &
Accessories
• Flat lift off cover
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• 3” casters, 3.75” ride height
• Door lock (solid door models only)
• Exterior thermometer (solid door
models only)
• Glass door(s)
• 220V/50 Hertz electrical system*
* Inclusion of this option will alter
electrical specifications of the unit
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
2.24
21.63
16.96
12.96
2.75
48.13
60.13
64.13
33.08
1.39
28.63
28.63
1.39
2.54
13.63
3.13
13.63
12.96
12.36
25.25
28.63
12.96
13.63
28.37
64.13
2.04
2.42
28.63
12.96
13.63
4.96
STANDARD PAN CONFIGURATIONS
72.1372.13 72.1372.13 72.13
25.67" [65.20]
TO EDGE OF DOOR
NOSE OF UNIT
2.50" [6.30]
INSIDE DIMENSION
22.75" [57.79]
23.79" [60.43]
17.35" [44.08]
7.53" [19.10]
12.98" [33.00]
6.11" [15.52]
SHELF
ALT. SHELF
21.94" [55.73]
26.86" [68.22]
20.75" [52.70]
31.50" [80.01]
9.72 [24.69]
6.06”
[15cm]
9.72“
[25cm]
1.00” [2.5cm]
25.67" [65.20]
TO EDGE OF DOOR
NOSE OF UNIT
INSIDE DIMENSION
22.75" [57.79]
TO EDGE OF DRAWER
NOSE OF UNIT
19.60" [49.77]
31.50" [80.01]
2.50" [6.30]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
9.72 [24.69]
6.06”
[15cm]
9.72“
[25cm]
1.00” [2.5cm]
TO EDGE OF DRAWER
NOSE OF UNIT
19.60" [49.77]
27.13
21.63
2.15 [5.47] 2.15 [5.47]
27.13" [68.91]
6.14 [15.61]
1.00” [2.5cm]
9.72 [24.69]
31.50" [80.01]
6.06”
[15cm]
9.72“
[25cm]
Front-Breathing Self-Contained Salad Top Refrigerated Bases
13.63
12.96
Pan Cutout Conguration
20.75" [52.70]
26.86" [68.22]
36.00" [91.40]
33.59" [85.31]
23.79" [60.43]
12.98" [33.00]
7.53" [19.10]
17.35" [44.08]
6.11" [15.52]
4427N-6 Elevation View
25.67" [65.20]
NOSE OF UNIT
TO EDGE OF DOOR
21.94" [55.73]
ALT. SHELF
SHELF
4427N-6 Right Side View
2.50" [6.30]
NOSE OF UNIT
TO EDGE OF DRAWER
19.60" [49.77]
22.75" [57.79]
INSIDE DIMENSION
6.14 [15.61]
4427N-6 ISO View
27.13" [68.91]
2.15 [5.47]2.15 [5.47]
1.00” [2.5cm]
D4427N-6 ISO View
31.50" [80.01]
9.72 [24.69]
9.72“
[25cm]
6.06”
[15cm]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
33.59" [85.31]
36.00" [91.40]
D4427N-6 Elevation View D4427N-6 Right Side View
# Of
Shelves
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelf Area
sq.ft.
Volume
cu.ft
Printed in the U.S.A.
DS4427N-S
04/11
INSTALLATION NOTE:
Refrigeration system is designed so that air will flow under the unit, through the compressor
area and out the front of the unit. Any restriction to this air flow path will void the warranties.
PLEASE NOTE:
Air flow through the louver on the back of the unit is not necessary for operation, however, any
air which passes through the louver is beneficial.
Specifications
Model
1/6 Size Pan
Capacity
4427N-6
D4427N-6
4427N Salad Top
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
6 1 3.17 8.20 1/5 115/60/1 7.2 5-15P 223lbs/101kg
6 NA NA 8.20 1/5 115/60/1 7.2 5-15P 245lbs/111kg
2.50" [6.30]
H.P. V/Hz/Ph Amps Nema Plug
Ship Weight
Loading...