Delfield 186114BST-E Installation Manual

18600 Series & CTP-NB

Original Instructions Installation, Operation and Maintenance Manual

This manual is updated as new information and models are released. Visit our website for the latest manual.

Part Number: 9291455 10/15

18600 and CTP-NB Series Service and Installation Manual

Important Warning And Safety Information

WARNING Read This Manual Thoroughly Before Operating, Installing, Or Performing Maintenance On The Equipment.

WARNING Failure To Follow Instructions In This Manual Can Cause Property Damage, Injury Or Death.

WARNING Do Not Store Or Use Gasoline Or Other Flammable Vapors Or Liquids In The Vicinity Of This Or Any Other

Appliance.

WARNING Unless All Cover And Access Panels Are In Place And Properly Secured, Do Not Operate This Equipment.

WARNING This Appliance Is Not Intended For Use By Persons Who Lack Experience Or Knowledge, Unless They Have

Been Given Supervision Or Instruction Concerning Use Of The Appliance By A Person Responsible For Their Safety.

WARNING This Appliance Is Not To Be Played With.

WARNING Do Not Clean With Water Jet.

WARNING Do Not Use Electrical Appliances Inside The Food Storage Compartment Of This Appliance.

CAUTION Observe the following:

• Minimum clearances must be maintained from all walls and combustible materials.

• Keep the equipment area free and clear of combustible material.

• Allow adequate clearance for air openings.

• Operate equipment only on the type of electricity indicated on the specification plate.

• Unplug the unit before making any repairs.

• Retain this manual for future reference.

Contents

Receiving & Inspecting Equipment ...........................................3

Serial Number Information ........................................................ 4

Warranty Information ................................................................. 4

Regulatory Certifications ............................................................ 4

Domestic Specifications .............................................................5

Domestic Refrigerant Charges ................................................... 6

Export Specifications .................................................................7

Installation ................................................................................. 8

Operation

18600PTB & PTL Series ......................................................... 9

18600BUC & BST Series ........................................................ 9

18600PDL Series .................................................................. 10

CTP-NB Series ......................................................................10

Pressure Control Settings ........................................................ 11

Temperature Control Settings .................................................. 11

Care And Cleaning ...............................................................12-13

18600PTB Cutting Board Installation ......................................14

Notes ........................................................................................ 15

18600 and CTP-NB Series Service and Installation Manual

Receiving And Inspecting The Equipment

Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building.

1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported to the delivering carrier immediately.

2. If damaged, open and inspect the contents with the carrier.

3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier. Notification should be made verbally as well as in written form.

4. Request an inspection by the shipping company of the damaged equipment. This should be done within 10 days from receipt of the equipment.

5. Check the lower portion of the unit to be sure legs or

6. Also open the compressor compartment housing and

7. Freight carriers can supply the necessary damage forms

8. Retain all crating material until an inspection has been

Uncrating the Equipment

First cut and remove the banding from around the crate. Remove the front of the crate material, use of some tools will be required. If the unit is on legs remove the top of the crate and lift the unit off the skid. If the unit is on casters it can be "rolled" off the skid.

casters are not bent.

visually inspect the refrigeration package. Be sure lines are secure and base is still intact.

upon request.

made or waived.

18600 and CTP-NB Series Service and Installation Manual

Serial Number Information

The serial number on 18600 Series units is located on the electrical specifications tag affixed inside the compressor section next to the pressure control. The serial number on CTP-NB Series units is located on the front of the unit. Always have the serial number of your unit available when calling for parts or service.

Warranty may be deemed invalid if other than authorized OEM (original equipment manufacture) replacement parts are used in Delfield equipment.

Warranty Information

Visit http://www.delfield.com/minisite/service/warranty_info to:

• Register your product for warranty.

• Verify warranty information.

• View and download a copy of your warranty.

Regulatory Certifications

Domestic Models are certiﬁed by:

National Sanitation Foundation (NSF)

Underwriters Laboratories (UL) Underwriters Laboratories of Canada (CUL)

Export (-E) Models are certiﬁed by:

National Sanitation Foundation (NSF)

Technical Inspection Association

European Conformity

18600 and CTP-NB Series Service and Installation Manual

Domestic Specifications

18600PTBM Pizza tables with raised rail

Model

18648PTBM 6 (1) 27” 1 124 3.95 10.23 470/441 2001/952 1/4 115/60/1 7.0 5-15P 520/236

18660PTBM 7 19” & 27” 2 70/124 6.51 15.12 694/617 2409/1208 1/3 115/60/1 8.0 5-15P 575/260

18672PTBM 9 (2) 27” 2 124 7.90 18.10 776/794 2967/1587 1/2 115/60/1 14.0 5-20P 635/288

18691PTBM 11 (2)27” & (1) 19” 3 124/70 10.29 24.48 1062/1058 3537/1865 1/2 115/60/1 14.0 5-20P 770/350

18699PTBM 12 (3) 27” 3 124 11.85 27.46 1144/1147 3537/1945 1/2 115/60/1 14.0 5-20P 805/365

186114PTBM 14 (3) 32” 3 140 14.46 33.05 1297/1323 5169/2433 3/4 115/60/1 16.0 5-20P 927/420

1/3 Pan Size

Capacity # Of Doors

18600BUCM Work tables

Model # Of Doors

18648BUCM (1) 27” 1 124 3.95 10.23 475/NA 1462/NA 1/5 115/60/1 8.0 5-15P 390/177

18660BUCM 19” & 27” 2 70/124 6.51 15.12 686/NA 1462/NA 1/5 115/60/1 8.0 5-15P 435/197

18672BUCM (2) 27” 2 124 7.90 18.10 856/NA 2263/NA 1/5 115/60/1 8.0 5-15P 495/225

18691BUCM (2)27” & (1) 19” 3 124/70 10.29 24.48 1169/NA 2263/NA 1/4 115/60/1 10.0 5-15P 535/243

18699BUCM (3) 27” 3 124 11.85 27.46 1220/NA 2263/NA 1/4 115/60/1 10.0 5-15P 594/269

186114BUCM (3) 32” 3 106 14.46 37.24 1373/NA 2813/NA 1/3 115/60/1 12.0 5-15P 685/310

# Of

Shelves

# Of

Shelves

Shelf Max

Load (LBS)

Shelf Max

Load (LBS)

Shelf Area

Volume

BTU Load

Base/Rail

BTU Load Base/Rail

BTU Sys. Cap.

Base/Rail H.P.

BTU Sys. Cap.

Base/Rail H.P.

Voltz/Hertz/

Phase Amps

Voltz/Hertz/

Phase Amps

NEMA

Plug

NEMA

Plug

Ship Weight

LBS/KG

Ship Weight

LBS/KG

18600BSTM Work table with backsplash

# Of

Model # Of Doors

18648BSTM (1) 27” 1 124 3.95 10.23 475/NA 1462/NA 1/5 115/60/1 8.0 5-15P 390/177

18660BSTM 19” & 27” 2 70/124 6.51 15.12 686/NA 1462/NA 1/5 115/60/1 8.0 5-15P 435/197

18672BSTM (2) 27” 2 124 7.90 18.10 856/NA 2261/NA 1/5 115/60/1 8.0 5-15P 495/225

18691BSTM (2)27” & (1) 19” 3 124/70 10.29 24.48 1169/NA 2261/NA 1/4 115/60/1 10.0 5-15P 535/243

18699BSTM (3) 27” 3 124 11.85 27.46 1220/NA 2591/NA 1/3 115/60/1 12.0 5-15P 594/269

186114BSTM (3) 32” 3 106 14.46 37.24 1373/NA 2591/NA 1/3 115/60/1 12.0 5-15P 685/310

Shelves

Shelf Max

Load (LBS)

Shelf Area

Volume

BTU Load Base/Rail

BTU Sys. Cap.

Base/Rail H.P.

Voltz/Hertz/

Phase Amps

NEMA

Plug

Ship Weight

LBS/KG

18600PTL Pizza table with LiquiTec® rail

Model

18648PTL 6 (1) 27” 1 124 3.95 10.23 470/441 2001/952 1/4 115/60/1 7.0 5-15P 520/236

18672PTL 9 (2) 27” 2 124 7.90 18.10 776/794 2967/1587 1/2 115/60/1 14.0 5-20P 635/288

18699PTL 12 (3) 27” 3 124 11.85 27.46 1144/1147 3537/1945 1/2 115/60/1 14.0 5-20P 805/365

1/3 Pan Size

Capacity # Of Doors

# Of

Shelves

Shelf Max

Load (LBS)

Shelf Area

Volume

BTU Load Base/Rail

BTU Sys. Cap.

Base/Rail H.P.

Voltz/Hertz/

Phase Amps

NEMA

Plug

Ship Weight

LBS/KG

18600PDL Pizza table with Dual LiquiTec® rails

Model

18648PDL 6 (1) 27” 1 124 3.95 10.23 424/1058 2001/1865 1/5,

18672PDL 9 (2) 27” 2 124 7.90 18.10 703/1588 2001/3174 1/5,

1/3 Pan Size

Capacity # Of Doors

# Of

Shelves

Shelf Max

Load (LBS)

Shelf Area

Volume

BTU Load Base/Rail

BTU Sys. Cap.

Base/Rail H.P.

Voltz/Hertz/

Phase Amps

115/60/1 10.1 5-20P 691/313

1/3

115/60/1 12.7 5-20P 873/396

1/2

NEMA

Plug

Ship Weight

LBS/KG

CTP-NB Counter top containment rail

Model

CTP8146-NB 4 5 305 523 1/5 115/60/1 4.0 5-15P 121/54.9

CTP8160-NB 6 7 462 653 1/5 115/60/1 4.0 5-15P 158/71.7

1/3 Pan Size

Capacity # Of Adapter Bars BTU Load

BTU System

Capacity H.P.

Voltz/Hertz/

Phase Amps

NEMA

Plug

Ship Weight

LBS/KG

+ 11 hidden pages