Definitive Technology IWSUB1010 User Manual

IWSub 10/10
& SubAmp 600
Ultra High-Performance In-Wall Subwoofer
and Separate Amplifier Module
Owner’s Manual
GET READY TO ROCK YOUR HOUSE!
Congratulations on your purchase of the remarkable Definitive Technology in-wall subwoofer IWSub 10/10 and its matching Definitive Technology SubAmp 600. This extraordinary In-Wall Subwoofer incorporates Definitive Technology’s exclusive and effective
SuperCube mance, the kind of musically accurate low end that’s never before been available in a compact, nearly invisible in-wall subwoofer. The IWSub 10/10 is specifically designed to be powered by the matching Definitive Technology SubAmp 600, which features two discrete high power amplifiers to provide optimal power when driving one or two IWSubs in your installation, whether it is for whole-house distributed audio or dedicated music or home theater applications.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
O NOT OPEN
D
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir. CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device. CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.
1. Read Instructions—All safety and operating instructions should be read before operating the device. Retain Instructions—The safety and operating instructions should be retained for future reference.
2.
3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and safety instructions should be followed.
5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
6.
7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.
8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.
9. Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-generating devices.
10. Power Supply—The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.
11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.
12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
15. Damage Requiring Service—The device should be serviced by licensed technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen or liquid spilled inside of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
16. Service—The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in
2
fire, shock, or other hazards.
Unpacking Your IWSub 10/10 and SubAmp 600
• Please inspect your new equipment carefully. Notify your Definitive Technology dealer immediately if you notice any damage or missing items.
• Record the serial numbers of your new equipment (usually found on the rear panels). Note this information in the appropriate place on your Warranty Card. Mail in your Warranty Card within 10 days of purchase.
• Keep the cartons and packing material. They will do the best job of protecting your speakers if they need to be transported.
Important Note Concerning In-Wall Installation
The IWSub 10/10 is designed to be installed inside the walls of your home quickly and easily. Because of its superb sonic performance, its installation location within your room is very flexible. But your room is not like anyone
s room, and because of its unique size and shape will have its own require-
else’ ments for optimal sonic performance. We recommend that you consult with the Custom Installation Specialist at your Defi your special needs or if you are at all uncertain about the best and safest way to install your subwoofer.
• Before starting construction or modification of your walls or ceilings, you should familiarize yourself with any applicable local fire and building codes.
nitive Technology dealer regarding
• Speaker wire must be run inside your wall as part of the installation process of in-wall loudspeakers. Plan the connection before you start your loud­speaker installation.
• Make sure the locations you select do not conceal studs, electrical wiring or plumbing. Prior to installation, hold the speaker in your chosen location to make sure it safely clears obstacles such as studs, corners, beams, lighting fixtures and door/window frames. Your cutout must be at least 1" (25mm) from adjoining walls or ceiling, internal studs or plumbing, and a minimum of 5" above the floor or 1" above the top of the baseboard (whichever is higher). Note that the frame around the inset loudspeaker extends 1" beyond your cutout.
• It is highly recommended that you take advantage of the expertise of a professional installation specialist.
3
Important Note Concerning Your IWSub 10/10 and SubAmp 600
Your IWSub 10/10 is specifically designed to be used in conjunction with the Definitive Technology SubAmp 600 and should never be used with another amplifier. You will not achieve optimal performance, and you may cause dam­age to your IWSub 10/10 if you attempt to power it using another amplifier or receiver. BECAUSE OF THIS, THE IWSUB 10/10 WARRANTY IS VOIDED IF AN AMPLIFIER OR RECEIVER OTHER THAN THE DEFINITIVE TECHNOLOGY SUBAMP 600 IS USED TO DRIVE THIS SUBWOOFER.
Installation
Mounting Your SubAmp 600 In An Audio Rack
Your SubAmp 600 features side mounting brackets for use in professional audio racks. When installing the SubAmp 600 in either professional audio racks or in AV rack furniture, be sure to leave adequate ventilation space around the SubAmp 600 unit.
Mounting Bracket Mounting Bracket
Tools Required for IWSub 10/10 In-Wall Installation
• Pencil for marking the location of installation.
• Keyhole saw or utility knife for cutting drywall.
• Level.
• Screwdriver, preferably powered, with Phillips head bit.
• Power drill with appropriate bit (optional, for starting wall cut). emplate (
• T
• Gasket material (
1. The IWSub 10/10 is designed to be located between two vertical studs,
inside a space of 14 oriented vertically. If your studs are spaced wider than this, you will have to shim one side of the inner wall space to properly secure the speaker in a
1
14
4
included: 143/8" x 197/8").
included).
1
/2"–151/2" space.
/2"–151/2", with the long dimension of the speaker
Figure 1
Figure 2
2. Make certain to incorporate at least 11/4" of space above and below the area within the inner wall space to make room for the IWSub’s locking arms.
With these measurement requirements in mind, place the template against
3. the inside edge of one of the studs. (Do not “center” the template if your studs are wider than 14
1
/2"–151/2".) Use a level to make certain the template is straight and plumb. The outside edge of the template will be your exact cutout size. [Figure 1]
Carefully cut the hole with the appropriate cutting tool for your wall mater
4. ial. Start the hole by drilling a hole on the inside of the template line (with the drill bit touching the line). Use this hole to insert your saw or knife and begin cutting. [
Figure 3 Figure 4
Figur
e 2
]
5. Before installing the speaker in the hole, apply the four long strips of gasket material to the speaker: two pieces on each side of the speaker that will come into contact with the studs. [
Figur
] Use the three shorter strips
e 3
of gasket material to pad the rear of the speaker against the back of the exposed wall. [
Figure 4]
-
5
Loading...
+ 9 hidden pages