Definitive Technology IWSUB1010 User Manual
Extraordinary New Custom Installation Solutions
New IWSub Reference:
In-Wall Thunder for “Stealth” Home Theater
Like Definitive’s first in-wall super sub, the IWSub 10/10, the IWSub Reference is a
completely self-enclosed in-wall subwoofer for use in whole house distributed music or
“stealth” home theater installations. It incorporates Definitive Technology’s exclusive
SuperCube Subwoofer Technology in a sensibly sized, compact enclosure that installs
easily in new construction or existing walls. The non-resonant sealed medite enclosure
fits flush into a standard stud bay. The paintable bezel and grille allow you to customize
your IWSub Reference to match your home décor and virtually disappear into your room.
Inside the precisely configured box is a specially-engineered shallow-depth, long
excursion 13" subwoofer driver coupled to a 13" pressure-driven infrasonic bass radiator.
This SuperCube technology allows the IWSub Reference to achieve remarkable bass
performance from a cabinet enclosure of modest internal volume. In fact, the performance of the IWSub Reference In-Wall Subwoofer goes well beyond the output level,
impact and low frequency limits of even its superb smaller cousin the IWSub 10/10,
all the while maintaining its fast, tight musical quality. Mounting Dimensions—Outer
Flange: 15
one 13" long-exercusion woofer coupled to a 13" infrasonic radiator. Frequency
Response: 14 Hz – 200 Hz.
designed for shelf, cabinet or rack placement. It is a powerhouse engineered to effortlessly drive one or two IWSub Reference In-Wall Subwoofers, for easily configured
multi-subwoofer or multi-room systems.
built-in high-pass filter, left/right and unfiltered LFE low-level inputs, continuously
variable level, phase and low-pass controls, signal sensing auto ON/OFF circuitry
and a 12-volt trigger.
19
11
3
Watts each, 460 Watts total.
1
/2"W x 263/16"H. Cut Out Size: 143/8"W x 251/8"H x 4"D. Driver Complement:
The IWSub’s matching high power amplifier, the SubAmp 600, is a separate unit
It features speaker level inputs/outputs with
1
/16"W x 37/16"H x 95/8"D . Dimensions (without brackets, including feet): 171/16"W x
Specifications: Dimensions (with brackets, feet removed):
/16"H x 95/8"D. Output: one channel operation: 275 Watts, two channels driven: 230
New Fully-Enclosed In-Wall Powered Subwoofer
Definitive’s new in-wall sub, which is based on our cutting-edge SuperCube
derived technology, is an engineering triumph. Finally a true high-performance
subwoofer of moderate size which can be easily installed or retrofitted flush into a
4" deep wall in either new or existing construction. The in-wall sub is composed of
two parts. The sub itself (IWSub10/10) is a 14
sealed medite enclosure which has an attractive bezel and grill on the front (15
3
/8"W x 197/8"H x 313/16"D non-resonant
1
/2"W x
21"H) which matches Definitive’s Ultimate In-Walls. Inside the box is a very special
high power long-excursion active 10" driver which is coupled to a pressure-driven
10" infrasonic radiator. This driver system was developed using SuperCube derived
technology which allows us to achieve remarkable bass performance from a cabinet
enclosure of very modest internal volume.
The IWSub’s matching high power digital amplifier, the SubAmp 600, is a separate
unit designed for shelf, cabinet or rack placement. It is a powerhouse engineered to
effortlessly drive one or two IWSub 10/10 In-Wall Subwoofers, for easily configured
multi-subwoofer or multi-room systems.
It features speaker level inputs/outputs
with built-in high-pass filter, left/right and unfiltered LFE low-level inputs,
continuously variable level, phase and low-pass controls, signal sensing auto
ON/OFF circuitry and a 12-volt trigger.
feet removed): 19
1
feet): 17
1
/16"W x 37/16"H x 95/8"D. Dimensions (without brackets, including
/16"W x 311/16"H x 95/8"D. Output: one channel operation: 275 Watts, two
Specifications: Dimensions (with brackets,
channels driven: 230 Watts each, 460 Watts total.
The applications for this incredible problem-solving in-wall subwoofer are many.
Obviously it is the perfect solution for a stealth high-performance home theater installation as the main LFE sub (using either one or two woofer modules). In addition, it is
clearly an easy answer for adding subwoofer punch to the rear and side channels of
any home theater. Plus it is a simple way to add full-range sub-enhanced performance
to every room in a distributed whole house audio system.
The amp and sub will be packaged separately. The performance of this powered
subwoofer is simply extraordinary with fast, tight, high-impact bass response extending from 16 Hz – 200 Hz. Equally superb with music or movies, the IWSub 10/10
and SubAmp 600 combination delivers SuperCube levels of performance.
Loading...