INSTRUCTION MANUAL V1.0
SP301-Cwww.defender-usa.com
Security Camera
Indoor/Outdoor CCD Security Camera w/ Night Vision
SP301-C
2
IMPORTANT! PLEASE READ!
NEED
HELP?
DO NOT RETURN THIS
PRODUCT TO THE STORE
Please contact a DEFENDER customer support representative rst regarding any additional information on product
features, specications or help with set-up.
Please contact us via one of the methods below:
Toll free telephone:
1.866.946.7828
For more product information visit www.defender-usa.com
Email:
support@defender-usa.com
Online live web chat:
Visit www.defender-usa.com
Toll free fax:
1.888.771.1701
Note: You may nd updated versions of this manual by visiting our website
SP301-C
3
WARRANTY INFORMATION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
PRODUCT WARRANTY INFORMATION
Please visit our website at www.defender-usa.com
for information about your product’s warranty.
We take quality very seriously. That is why all of our products come with a one year warranty from the original
purchase date against defects in workmanship and materials. If you have warranty or support issues please
contact us using any of the following methods:
Phone: 1.866.946.7828 DEFENDER USA DEFENDER CANADA
Fax: 1.888.771.1701 60 Industrial Parkway #Z64 4080 Montrose Road
Email: support@defender-usa.com Cheektowaga, NY Niagara Falls, ON
Website: www.defender-usa.com USA 14227 Canada L2H 1J9
Warranty Terms
1. Defender products are guaranteed for a period of one year from the date of purchase against defects in
workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase
price at Defender’s option.
2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tam
pered with contrary to the applicable instruction manual.
3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this
warranty.
4. The warranty expressly provided for herein is the sole warranty provided in connection with the product
itself and no other warranty, expressed or implied is provided. Defender assumes no responsibilities for
any other claims not specically mentioned in this warranty.
5. This warranty does not cover shipping costs, insurance, or any other incidental charges.
6. You MUST call Defender before sending any product back for repair. You will be sent a Return Authorization
number with return instructions. When returning the product for warranty service, please pack it carefully
in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief
explanation of the problem (include RA #).
7. This warranty is valid only in Canada and the continental U.S.
8. This warranty cannot be re-issued.
SP301-C
1
WHAT IS INCLUDED
FEATURES
1 Indoor/Outdoor
Night Vision CCD Color
Camera
2 Window
Security Stickers
4 PIN DIN to RCA (male)
Video/Power Wire
• BNC to RCA Connector
• 1 Power Adapter for Camera
• Mounting Hardware
• Instruction Manual
• 1 Year Warranty
• Online/Toll Free Support
Table of Contents
WHAT IS INCLUDED ...................................................................................................................................1
FEATURES .................................................................................................................................................1
CAMERA INSTALLATION ............................................................................................................................2
MOUNTING THE CAMERA ........................................................................................................................2
CONNECTING THE CAMERA .....................................................................................................................2
TROUBLE SHOOTING ................................................................................................................................3
SPECIFICATIONS ...................................................................................................................................... 4
NOTES ...................................................................................................................................................... 5
DRILLING TEMPLATE ...............................................................................................................................6
SP301-C Camera
1. Sun Shield: Helps prevent glare from bright lights
2. Infrared (IR): LEDs Allows the camera to see in the dark
up to 15ft away.
3. CDS Sensor: Automatically turns on the infrared LEDs
when it gets dark
4. Camera Housing
5. Camera Mount
6. 4 PIN DIN Female Connection
IMPORTANT INFORMATION
While this camera is weatherproof, it is not waterproof.
Please do not install it in areas that receive direct rain or
under eaves trough draining spots. Do not cut the DC power
cable of this camera to t with another power source. Do not
cut the video connection wire to t with a dierent video
connection type. Any unauthorized modications will void
your warranty.
TABLE OF CONTENTS
SP301-C
2
1. Screw the mounting bracket into the camera’s mounting
hole, turning it clockwise.
2. Mount the camera in the desired location no more than
60 feet from the TV/Monitor/VCR DVR unless you have
purchased additional wiring. You may wall mount or
desk mount these cameras.
3. Adjust cameras to the desired viewing angles.
1. Plug the 4 PIN DIN female connection
on the camera into the 4 PIN DIN male
connection on the 60ft video/power
wire.
2. Match the two arrows on top of both
connecting cables.
3. Plug the camera’s power supply into
the power jack located on the 60ft
video/power wire.
4. Plug the camera’s power adapter into
an AC outlet or surge protected power
bar.
1 2
3 4
• The camera should be installed between 8 and 13ft above the area to be monitored
• Ensure there are no obstructions in the camera’s view, to maximize viewing area
• Ensure that the sunshade is positioned to avoid glare and position camera away from direct sunlight
• Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall mounting, use the mounting
hardware in the package. We recommend that the mounting bracket is secured using the included screws for all
installations
• This camera comes with 60ft of video/power wire. Please make sure that you mount the cameras no more than
60ft from the TV/monitor/VCR/DVR
• We recommend using a surge protected power bar to protect the cameras internal circuitry
MOUNTING THE CAMERA
Follow these instructions for the installation of each camera. The 60ft video/power wire has two connections: one for
video out, and one for power.
CONNECTING THE CAMERA
INSTALLATION
SP301-C
3
No picture/signal:
• Make sure your TV/monitor is on the correct video input channel. This is NOT
channel 3 Common terms for this channel is INPUT, AV CHANNEL, LINE 1, LINE
2 and AUX. Please use your TV or VCR manual to correctly identify this channel
• If your camera is connected to a VCR/DVR, make sure that it is properly
connected to your TV/monitor
• Check all connections to make sure they are secure and properly connected
• Check your power supply to ensure that the camera is powered up
Picture is too bright:
• Make sure your camera is not aimed at direct sunlight
• Adjust the sunshade by sliding it forwards to block out excess light
• Make sure nothing is obstructing the CDS sensor on the camera. If the CDS
sensor is blocked, night vision mode will be active and may produce extra light
in your camera’s picture
• Move your camera to another location
Picture is too dark:
• If using at night, make sure your camera’s subject is no more than 15ft away
(may vary based on amount of ambient light available)
• If using during the day, your camera may not be getting enough light. Adjust
the sunshade by sliding it backwards to let in more light
• Check the brightness and contrast settings on your TV/monitor
• If your camera is connected to a VCR/DVR, check the brightness and contrast
settings on the VCR/DVR
• Move your camera to another location
Night Vision is
not working:
• The night vision turns on automatically when light levels drop. Try the camera in
a pitch black setting. The area that it is in may have too much light and may not
activate the sensor
• Cup your hands around the front of the camera and look at the LEDs. They
should be glowing red. If they are not, check the power supply
• LEDs need to reect o of an object within range for the camera to display an
image
5 6
5. Connect the 60ft video/power wire’s
male RCA plug to the VIDEO IN port of
your TV/monitor/VCR/DVR.
6. If your VIDEO IN port is a BNC connection
(common with DVR units), you will need
to attach the BNC to RCA adapter before
connecting the camera.
TROUBLESHOOTING
INSTALLATION
SP301-C
4
4
Camera Type Weatherproof Color IR
CCD Camera
Image Sensor 1/4" Color SHARP CCD
Resolution 420 TV Lines
Outdoor Use Yes
IP Rating IP65
Focal Length 3.6mm
Focus Type Fixed
Optimal Focal Distance 20 ft
Motion detection No
Night Vision Yes
Number of IR LEDs and
Range
12, up to 15ft
IR LED Control Automatic (CDS Sensor)
Min. Illumination 0 lux
IR Wavelength 850nm
Video Output 4 PIN DIN to RCA
TV System NTSC
Viewing Angle 60 Degrees
Electronic Shutter 1/60 ~ 1/100000 sec
BLC No
AGC Automatic
ELC Automatic
Line Lock No
Iris Control No
Gamma Correction >0.45
White Balance Automatic
Sun Shield Yes
IR Cut Filter No
Housing Material Anodized Aluminum
Housing Color Black
Signal/Noise Ratio >48dB
Camera Bracket Yes
Lens Mount type M12
Pan/Tilt/Zoom No
Operating Temperature -10° ~ 60°C / Degrees
Operating Humidity 98%
Camera Power Input DC 12V 300mA
Power Adapter Input 120V 60Hz
LED Power Indicator No
Dimensions 4.7"(L) x 2.5"(W) X
2.5"(H)
Weight 0.7 lbs
SPECIFICATIONS
SP301-C
5
Customer Information Card
Contact Name:
Company:
Address:
Postal Code:
Phone Number:
Email:
Model Number of Product:
Serial Number of Product:
Purchase Date:
Place of Purchase:
NOTE: We recommend that you keep a record of your purchase receipt with your manual for any future
returns or support issues.
NOTES
SP301-C
6
To wall mount the camera, drill three holes using a 3/16" drill bit and the template below. Insert the
supplied wall anchors into holes and secure camera to wall with supplied screws.
DRILL HOLES IN
THESE POSITIONS
DRILLING TEMPLATE
Disclaimer
Defender does not endorse the use of any Defender products for illegal activities. Defender is not responsible or liable in any way shape or form for any damage, vandalism, theft or any other action that may
occur while a Defender product is in use by the consumer.
VISIT US ON THE WEB!
► Product Information
►User Manuals
► Quick Start Guides
► Specication Sheets
► Software Updates
► Firmware Upgrades
www.defender-usa.com
SP301-Cwww.defender-usa.com
Loading...