Installation Manual
Defender G-lens 321/323/324/326 webcam
www.defender-global.com
1
www.defender-global.com
2
Defender G-lens 321/323/324/326 webcam
Thank you for choosing our Defender webcam! The quality of this
digital product is guaranteed by our cutting-edge technologies. With
high denition and high-speed data transmission features the Defender
G-lens webcam will make communication with friends and relatives more
comfortable while reducing the distance between you.
System requirements:
• CPU from 1 GHz
• Windows XP/Vista/ Windows 7
• Graphics card compatible with Direct X 9.0 VGA
• Free USB port
• Audio card
• Free 500 Mb of space on hard drive
• USB 2.0 interface (500 mA)
Installation of G-lens webcam software for Windows XP
Installation of the device driver from CD
1. Insert the CD from the webcam kit into the CD drive. If your operating
system has the autorun support feature enabled, the installation program
will be launched automatically. If your operating system has the autorun
support feature disabled, open the CD contents and run the autorun.exe
le using the explorer.
2. In the popup window of the installation program select Install driver.
3. In the next popup window select the model of your webcam.
4. he following window will alert you that the webcam should be disabled
and all launched programs should be closed.
Press OK.
www.defender-global.com
3
5. After installation is nished, the webcam installation completion
windows will popup.
Connect your webcam. At the right bottom of the screen New equipment
found icon will popup.
6. New Equipment Wizard window will popup.
Press Next.
7. The automatic installation of drivers will start.
8. After installation is nished, press Done.
How to nd your webcam in the Devices Manager
In case of successful installation the Devices Manager will have a PC
Camera device listed in the Image Processing Devices section.
The Devices Manager window can be opened in two ways:
1. Press Start (at the left bottom of the screen or on the keyboard). Then
select My Computer or Computer, press the right mouse button and select
Properties. In the popup window select Devices Manager.
2. Press Start. Then select My Computer or Computer, press the right
www.defender-global.com
4
mouse button and select Management. In the popup window select
Devices Manager.
How to disable the digital signature verication feature
1. Press Start (at the left bottom of the screen or on the keyboard). Then
select My Computer or Computer, press the right mouse button and select
Properties. Open the Equipment tab and press Signature of drivers.
2. The Parameters of driver signature window will popup.
Check boxes Skip-install software and not prompt for approvals and Use
the action as the system one by default.
3. When you’re nished, press OK in opened windows and conrm the
restart of computer.
Note: In some cases, depending on the software and computer
conguration a dierent layout of windows and other operations procedure
are possible. If user rights are restricted, we recommend contacting the
computer administrator or use the computer administrator account.
Manual installation of the driver
1. Download the driver for manual installation and unzip it (depending on
the archive, ZIP or RAR archive manager may be required) to the PAC7302
folder located in the system root disk.
If you have previously installed the driver from the setup disk, the folder
with drivers will be located as specied below:
System disk:\Program Files\Common Files\PAC7302 (for 32-bit operating
systems).
We recommend copying the PAC7302 folder to the system root disk or any
other disk available in the system. Depending on the operating system
settings the above path may appear unavailable. Refer to operating
system sections in the documents which describe how to make hidden
and system les available.
2. Launch the Devices Manager (see the launching procedure above) and
connect your webcam.
www.defender-global.com
5
3. The Equipment Wizard window will open.
Press Next.
In case the window does not open:
1) right click on USB Device or Unknown device (as situation requires) and
select Properties.
2) in the popup window select the Driver tab, then select Refresh.
3) in the popup New equipment wizard window select Installation from
the specied location.
4) In the popup window press Browse. The following window will appear:
Select the folder where you have previously unzipped the driver to and
press OK.
5. Installation of the driver will launch.
6. After installation is nished, press Done.
7. In case of successful installation the Devices Manager will have a PC
Camera device listed in the Image Processing Devices section.
8. After installation is nished, restart the computer.
Note: In some cases, depending on the software and computer
conguration a dierent layout of windows and other operations
procedure are possible. If user rights are restricted, we recommend
contacting the computer administrator or use the computer administrator
account.
Installation of G-lens webcam software for Windows Vista
Installation of the device driver from CD
1. Insert the CD from the webcam kit into the CD drive. If your operating
system has the autorun support feature enabled, the installation program
will be launched automatically.
2. In case your operating system has the autorun support feature disabled,
open the CD contents and run the autorun.exe le using the explorer.
www.defender-global.com
6
Select Run autorun.exe.
3. In the popup window of the installation program select Install driver.
4. In the next popup window select the model of your webcam.
5. Select the Enable button in the User accounts control window.
6. The window alerting you that the webcam should be disabled and all
launched programs should be closed will open.
Press OK.
7. The Windows Safety window will popup.
Press Install.
8. Wait until the installation completion window appears:
www.defender-global.com
7
9. Connect your webcam. At the right bottom of the screen the Software
installation icon (the end icon located on the left in the icons row) will
appear.
10. Make sure the Devices Manager in the Image Processing Devices
section has a PC Camera device listed.
Press Finish in the installation completion window.
How to nd your webcam in the Devices Manager
The Devices Manager window can be opened in two ways:
1. Press Start
(at the left bottom of the screen or on the keypad).
Then right click on My Computer or Computer and select Properties. In the
popup window select Devices Manager.
2. Press Start
(at the left bottom of the screen or on the keypad).
Then right click on My Computer or Computer and select Management. In
the popup window select Devices Manager.
Loading...