Dee Zee DZ95720 User Manual

Page 1 of 12
DZ 95720 2/14/13
Dee Zee Ford F-150 Aluminum Flow Through Tailgate
Installation Instructions
Congratulations on your purchase of a quality Dee Zee product. Dee Zee is
recognized as having the highest quality running boards and accessories on the
easiest product to install.
Note: Please take time to read all of the instructions before beginning this installation.
If you should happen to have any questions with this product or you have an installation
question, please feel free to call us at:
1-800-779-8222
If you would like to find out more information on Dee Zee’s products, please feel free to visit
our website at:
WWW.DEEZEE.COM
Page 2 of 12
DZ 95720 2/14/13
DZ 95720(B) Flow Through Tailgate
F D
Allen Wrench
E
A
FTTG
-F-
150-ASSM
B
C
Ratchet and Socket
G
H
PN 526
Assembled Tailgate
M8-1.25 Flange Nut
Thread Lock
X1
TGNYLONSLEEVE1
X2
Nylon Hinge Tube Insert
Tailgate Assist Shock
Part of TA43200
Latch Striker Plastic
X1
X1
Nylon Hinge Tube Insert
TGNYLONSLEEVE3C
Shock Mounting Plate
Part of TA43200
X1
X1
Part of TA43200
X1
TG-FORDSTRIKERSLEEVE
Tools Required
X2
3/16” Torx – T50 Torx – T45
Page 3 of 12
DZ 95720 2/14/13
or Wrench
Torx – T50 Torx – T45
13mm
1/2”
1
2
Open t
ailgate
, remove cable at bed attachment
Remove both cables from factory tailgate by
Limiter
point. Lay back tailgate 30-45 degrees until notch in passenger side tailgate hinge is parallel with the mounting pin. Pull up on tailgate parallel to mounting pin on passenger side. With Passenger side loose pull sideways to disengage driver side mounting pin.
Factory Tailgate Removal
removing Torx T45 bolt from tailgate. Remove motion limiter, flat retaining washer must be removed to do this.
Cable Removal
Page 4 of 12
DZ 95720 2/14/13
Loading...
+ 8 hidden pages