Dee Zee DZ1032 User Manual
Before returning this product
to the store of purchase
Contact Dee Zee if you experience the following problems:
•MissingParts
•InstallationProblems/Questions
•WarrantyQuestions
1.800.779.2102
Hoursofoperation:8am-5pmCST,Mon-Friday
Reviewcompletewarrantypolicyandregisteryourproductat:
www.deezee.com
Dee Zee Running Board Installation Instructions
Congratulations on your purchase of a quality Dee Zee product. Dee Zee is
recognized as having the highest quality running boards and accessories on
the market today. We have earned this reputation by offering our customers
a product they can be proud to place on their vehicles. Dee Zee meets all
the criteria of manufacturing a custom-fit product which guarantees it to
be the easiest product to install.
Note: Please take time to read all of the instructions before beginning this installation.
War ning! Please check for wiring or other obstr uctions before drilling any holes into
the vehicle. If it is necessar y to drill any holes into the vehicle, Dee Zee recommends
putting a sealant or rust inhibitor around all holes drilled into the body of the vehicle.
War ning! It is the sole responsibility of the vehicle owner to check for tire clearance.
War ning! It is unlawful and dangerous to ride on r unning boards or side box boards
while the vehicle is in motion.
Cleaning Instructions: To maintain the bright finish of your Dee Zee running boards,
clean with a mild deter gent. For our stainless steel products and accessories, the
application of a high grade automotive type wax is recommended.
If you should happen to have any questions with this product or you have an
installation question, please feel fr ee to call us at:
1-800-779-8222
If you would like to find out mor e infor mation on Dee Zee’s products please
feel free to visit our website at:
WWW.DEEZEE.COM
BD 1032 LP/RP
1 LH / 1 RH
GSK-41
16.5 FT.
FP0321P/2P
1 LH / 1 RH
B 1984P
X6
BRACKET
B 1985P
X6
B 134
X6
PN 70
X24
PN 72
X 66
Dee Zee Brite Tread Board Installation Instruction
DZ 1032 Chevy 135" WB Van
A B C D
PN 71
X42
PN 97
X12
PN 87
X18
BT BOARD RUBBER TRIM MUD FLAP ANGLE BRACE
E F G H
ROCKER PANEL
I
1/4" HEX NUT SHEET
J K
FRAME BRACKET 1/4 X 3/4" HEX
HEAD BOLT
1/4 X 1" RIBNECK
METAL SCREW
CARRIAGE BOLT
1/4" FLAT WASHER
DZ 1032 1 OF 9 7/28/2011
WRENCH/RATCHET
3/8", 7/16"
TAPE
MEASURE
TIN SNIPS
3/16" DRILL BIT
1/4" DRILL BIT
Place the rubber trim onto the back lip of the running board. Cut the trim to length using tin snips.
TOOLS REQUIRED
Attach the mud flap [C] to the end of the running board using
the 1/4" x 3/4" hex head bolt [G], the 1/4" flat washer [H], and the 1/4" hex nut [I].
1
2
DZ 1032 2 OF 9 7/28/2011
Loading...