DE DIETRICH DVH740WE1 User Manual

Dear Customer,

You have just acquired a

DDEE DDIIEETTRRIICCHH

dishwasher and we would like to thank you.

Our research teams have created this new generation of appliances for you. Their quality, design, features and technological advances make them exceptional products, and reveal our unique know-how.

Your new

DDEE DDIIEETTRRIICCHH

dishwasher will blend harmoniously into your kitchen and will perfectly combine washing and drying performance and ease of use. We wanted to offer you a product of excellence.

In the

DDEE DDIIEETTRRIICCHH

product range, you will also find a wide choice of hobs, ovens,

microwaves, hoods, cookers, fridges, freezers, that you can coordinate with your new

DDEE

DDIIEETTRRIICCHH

dishwasher.

Visit our website

wwwwww..ddeeddiieettrriicchh--eelleeccttrroommeennaaggeerr..ccoomm

, where you will find our latest inno-

vations as well as useful and complementary information.

DDEE DDIIEETTRRIICCHH Setting New Values

As part of our commitment to constantly improving our products, we reserve the right to make changes to them based on technical advances to their technical and functional features and appearance.

WWaarrnniinngg :: BBeeffoorree iinnssttaalllliinngg aanndd uussiinngg yyoouurr aapppplliiaannccee,, pplleeaassee ccaarreeffuullllyy rreeaadd tthhiiss GGuuiiddee

ttoo IInnssttaallllaatti

ioonn aanndd UUssee,, wwhhiicchh wwiillll aallllooww yyoouu ttoo qquuiicckkllyy ffaammiilliiaarriissee yyoouurrsseellff wwiitthh iittss

ooppeerraattiioonn..

CONTENTS

1/ FOR THE USER’S ATTENTION

• Safety instructions ______________________________________ 36

• Protection of the environment______________________________ 37

• Economical, environmentally friendly washing ________________ 37

2/ DESCRIPTION OF YOUR APPLIANCE

• General presentation of the dishwasher ____________________ 38

• Presentation of the control panel __________________________ 39

3/ INFORMATION ______________________________________________ 40 4/ WHAT TO DO BEFORE FIRST USING THE MACHINE

• Measure the water hardness and select the type of detergent __ 41

• Hardness table__________________________________________ 41

5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER

• For traditional products __________________________________ 42

•

For multi-purpose products

________________________________ 43 6/ LOADING OF REGENERATING SALT __________________________ 44 7/ LOADING OF RINSING PRODUCT ____________________________ 45 8/ YOUR DISHWASHER’S EQUIPMENT

• The lower basket ________________________________________ 46

• The upper basket ________________________________________ 47

• The cutlery basket ______________________________________ 48

9/ SETTING THE PARAMETERS__________________________________ 49 10/ WASHING PROGRAMMES TABLE ____________________________ 50 11/ PROGRAMMING __________________________________________ 52 12/ YOUR DISHWASHER’S SAFETY SYSTEMS ____________________ 54 13/ CLEANING YOUR APPLIANCE

• Cleaning the waste filters ________________________________ 55

14/ IF OPERATING ABNORMALITIES OCCUR______________________ 57

• Changing the bulb ______________________________________ 62

15/

AFTER-SALES SERVICE ____________________________________ 63

16/ INDICATIONS FOR THE TESTING LABORATORIES ______________ 64

1/ FOR THE USER’S ATTENTION

Important :

Keep this user’s manual with your appliance. If the appliance is sold or transferred to someone else, ensure that the manual is with it. Please take note of these instructions before installing and using your appliance. They have been drawn up for your own and other people’s safety.

• SAFETY INSTRUCTIONS

• Installation

— When you receive your appliance, unpack it or have it unpacked immediately. Check that it has not suffered any damage during transport. Express any reservations in writing on the delivery note, of which you keep a copy. Never connect up a damaged machine. If your appliance is damaged, please contact your dealer. — Before proceeding to connect up your machine, please refer to the instructions in your Installation Guide. — Your dishwasher must be kept disconnected from the mains supply throughout the whole of the installation process. — The electrical connection details on your appliance’s description plate must comply with those for the mains supply. — The socket must still be accessible once your appliance has been installed. — Do not alter or attempt to alter the appliance’s characteristics. This could put you at risk. — If your installation has to be altered, only entrust the electrical and plumbing work to a qualified electrician or plumber respectively. — Your appliance is designed for normal domestic use. Do not use it for industrial or commercial purposes or for any other purpose than that for which it has been designed. — The dishwasher’s walls must not be pierced under any circumstances.

• Children’s safety

— This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. — This appliance must only be used by adults. Ensure that children do not touch it and do not use it as a toy. Ensure that they do not operate the appliance’s controls. — Keep young children away from the appliance when it is operating. — Detergents contain irritant and abrasive substances. These products can have caustic effects on the eyes, the mouth or the throat. They can be extremely dangerous if ingested. Avoid any contact with the skin and the eyes. Ensure that the appliance’s detergent container is empty at the end of the washing cycle. — Place detergents out of children’s reach and do not put any detergent in the machine until just before you start the washing programme. — The water in your dishwasher is not drinking water; this is why children must not go near the appliance when its door is open. — Do not let your children play or sit on the door when it is open. — Once you have unpacked your appliance, place the packaging out of children’s reach. — Keep all the packaging materials (e.g. plastic bags, polystyrene, etc.) out of children’s reach because they can be dangerous for children (ie. risk of suffocation).

• Use

— This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. — When machine is running, do not open door. This may provoke steam leakage or splattering of water.

1/ FOR THE USER’S ATTENTION

— Only use products specially designed for your dishwasher (water softening salt, detergent and rinsing products). — As far as possible, avoid opening the dishwasher’s door when it is operating, and in particular during the heating phases, because scalding steam may escape or you may be splashed with hot water. The machine is fitted with a safety system that immediately blocks the dishwasher’s operation if the door is opened. — Never use chemical solvents in your appliance because these could cause an explosion. — Always close your appliance’s door after loading or removing your items. — Do not lean or sit on your appliance’s door when it is open. — You are strongly advised to disconnect the machine after use and turn off the water supply. — Unplug your machine before carrying out any technical work on it. — Avoid placing your machine immediately next to a cooking or heating appliance to prevent any risk of heat damage; — Do not place any items in your machine, which are not certified as dishwasher safe. — If you have removed an item before the end of the washing programme, it is important to rinse it carefully to remove any residual washing products. — If your appliance breaks down, never attempt to repair it yourself. Any repairs made by non-qualified personnel can cause significant damage or lack of control. — The machine complies with applicable safety regulations. Any repairs should be carried out by qualified technicians. Repairs or changes that do not conform may be dangerous for the users. In case of replacement, only use original parts. — If the machine malfunctions due to other causes than those mentioned in this booklet, disconnect the machine (remove the plug) or break the circuit concerned and contact Kleenmaid’s after-sales service.

•

ENVIRONMENTAL PROTECTION

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate that in countries that are a members of the European Union the used

appliances should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

• ECONOMICAL, ENVIRONMENTALLY FRIENDLY WASHING

— Remove any food residue from your crockery (bones, pips, etc.) — Do not pre-wash your items by hand (useless waste of water). — Utilise your dishwasher’s capabilities to the full for an economical, environmentally friendly wash. — Always select a washing programme suitable for the crockery type and how dirty they are. — Avoid overdosing with detergent, regenerating salt and rinsing liquid. Follow the recommendations in this guide (pages 43-44-45) and the instructions on the product packs. — Ensure that the water softener is correctly set (see pages 42-43).

2/ DESCRIPTION OF YOUR APPLIANCE

Advice:

This user’s guide is applicable to several models. There may be some slight differences

in the details and the equipment between your appliance and the descriptions provided here.

• GENERAL PRESENTATION OF THE DISHWASHER

Fig. 01

Upper basket

Washing products dispenser

Anti-blocking gauge wire

Lower sprinkler arm

Regenerating salt tank

Waste filter

Main filter

Rinsing product dispenser

Description plate (After-Sales

Ref)

2/ DESCRIPTION OF YOUR APPLIANCE

• PRESENTATION OF THE CONTROL PANEL

On/Off:

Press this button to start your dishwasher.

Choosing a programme:

briefly press one button or the other in succession to select your programme.

IInntteelllliiggeenntt CCoonnttrrooll SSyysstteemm

press this button to select the Automatic programme.

Set :

• A long press: Access to the Settings

menus:

- Set the current time,

- Set the water softener,

- Activate or deactivate the “Regenerating Salt” and/or “Rinsing Product” lights, or the “AUTO 4/1” function (depending on the water softener setting on the following pages).

- Beep at end of programme,

- Set screen brightness.

The screen

shows you the current time, the finishing time, the remaining time for the programme and the parameter settings.

Programme progress :

This shows you the programme’s

progress.

Delaying the end of a programme:

Press one of the buttons or the other to select the time for the programme to end.

Start/Cancel:

Briefly press this button to start your programme. If you make an error, to cancel a selection or cancel a programme while it is running, hold down this button for 3 seconds.

The indicator lights:

SSaalltt::

When lit, it indicates lack of regenerating salt

Rinsing liquid:

When lit, it indicates lack of rinsing product

Multipurpose products:

lit; shows you that the “AUTO 4/1” feature is turned on and that the programmes are now automatically adjusted if a multi-function tablet is used.

Advice:

A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.

Fig. 02

3/ INFORMATION

Important:

To obtain impeccable washing and drying results from your dishwasher without any marks, you must set it carefully using the water softening system, which utilises regenerating salt.

- Use the most suitable washing products for the hardness of your town’s water supply.

- There are several types of products:

As rainwater infiltrates into the ground it picks up mineral salts; some minerals are found in solid form and are commonly called ‘lime’. This reduces the detergent’s washing performance and leaves white marks on the crockery. The more lime there is in the water, the ‘harder’ the water is.

For an impeccable clean, opt for using traditional products together:

①①

Washing product

for a perfect clean

(standard powder, liquid or tablets).

②②

Regenerating salt

for your dishwa-

sher’s water softener to work correctly.

③③

Rinsing liquid

to assist drying and eli-

minate drip marks.

Important:

Never use normal washing-up liquid.

For ease of use and in certain water hardness conditions only (< 25°F), multi-purpose products

can make the use of regenerating salt and rinsing liquid unnecessary.

• “Two-in-one” tablets

contain detergents and rinsing liquid or an agent serving the function of the salt.

• “Three-in-one” tablets

contain detergents and rinsing liquid as well as an agent serving the function of the salt.

• “Four-in-one” tablets

also contain additives that prevent wear on poor quality glasses or the risk of stainless items corroding.

Important:

Follow the instructions in the user’s manual and the recommendations on the multi-purpose detergent’s pack.

NB:

If in any doubt, please contact the detergent’s manufacturer if the items are very wet at the end of the programme or if chalky deposits appear.

4/ WHAT TO DO BEFORE FIRST USING THE MACHINE

In one simple action, you can test the your water’s lime content using the testing strip supplied with your dishwasher. Alternatively, contact your local water utility to ascertain your water’s hardness.

— Let the water run from the tap for a few moments. — Fill a glass with water. — Take the test strip from its holder and immerse it for 3 seconds. — Wait 1 minute, shake it and look at the colours to ascertain your water’s hardness.

• MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETERGENT: TRADITIONAL OR MULTI-PURPOSE

• HARDNESS TABLE

➊

TTrraaddiittiioonnaall pprroodduuccttss::

PP: PP

owder detergent or

LL: LL

iquid detergent + SS: Regenerating SSalt + RR: RRinsing product

➋

MMuullttii--ppuurrppoossee pprroodduuccttss::

Multi-purpose tablets

Possible use of traditional products ➊ Use only of traditional products ➊

oorr

➋ Multi-purpose

➋

➊

oorr

TTeesstt ssttrriipp

HHaarrddnneessss

0-10°F 10-18°F 18-25°F 25-40°F 40-55°F 55-70°F

> 70°F

WWaatteerr

Soft

Slightly hard Slightly hard

Hard Hard Hard

Very hard

WWaatteerr ssooffttee--

nniinngg aanndd uussee

ooff ssaalltt

Optional

Essential if

using traditional

products

Essential if

using traditional

products

Mandatory Mandatory Mandatory Mandatory

5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER

Important:

It is very important to set the water softener correctly.

- If the setting is too low, there is the risk of chalky marks appearing.

- if the setting is too high, there is the risk of causing clouding of the glasses.

If you relocate, adjust the water softener setting as required.

• Traditional tablets

Non-multipurpose tablets should be placed in the external compartment (Fig 04) or, for optimum performance, pull out the dispenser drawer and lay the tablet inside (Fig 05).

• Powders or liquids (Fig 13)

Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirty crockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that you add 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the programmes table.

Important:

Keep these products out of children’s reach and away from dampness.

Only use products specially designed for dishwashers.

Fig. 04 Fig. 05Fig. 03

• FOR TRADITIONAL PRODUCTS

• Your machine must be specially adjusted to use traditional products.

Factory setting :

HH44

• Proceed as follows to adjust the water softener on the control panel:

—

This feature is adjusted using the “SET” ; button; hold down this button to access the menu. Then press twice to set the softener level. —

The softener level is then shown on the screen from

HH00

HH66

. The default level is

HH44

— To change the level from

HH00

HH66

, depending on the water hardness, press either arrow button several times the screen displays the level you have set. — The setting is validated automatically after 10 seconds if the

“

SET”button in not pressed again.

— Pressing “S

ET” enables you to validate the setting and move on to the next parameter.

TTeessttiinngg ssttrriipp

HHaarrddnneessss

0-10°F 10-18°F 18-25°F

25-40°F

40-55°F 55-70°F > 70°F

TTrraaddiittiioonnaall

pprroodduucctt

HIH0 H2 H3 H4 H5 H6

5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER

NB:

You can deactivate the “Salt” and “Rinsing” product lights if you are using multi-purpose

products; this is done by using the “S

” button (page 49)

• Loading the multi-purpose tablet dispenser

To assist in loading the detergent, the distributor is situated on the front of the upper basket. It is compatible with all the products recommended for dishwashers.

• Place the tablet

in the external compartment (Fig 04 on previous page) or, for optimum

results, pull out the distributor’s drawer and lay the tablet inside

(Fig 05 on previous page).

- Close the dispenser.

• FOR MULTI-PURPOSE PRODUCTS (

Water hardness < at 25°F)

• Proceed to set the water softener

—

This feature is adjusted using the “S

ET” ; button; hold down this button to access the menu. Then

press twice to set the softener level. —

The softener level is then shown on the screen from

HH00

HH66

. The default level is

HH44

— In order to use multi-function tablets, you need to adjust the setting. To do this, press either arrow button several times until you have selected

HH00

HH II

HH22

depending on the water hardness.

• Proceed to set the “ ” function (optional)

— Hold down the “SET” button until the “AUTO 4/1” light flashes, then press one or other of the selection buttons

— : deactivates the “A

UTO 4/1” option.

—

: corresponds to activation of the “AUTO 4/1” function with the setting for “Sparkling Clean”.

. This enables you to prioritise a brilliant finish for your crockery.

— : corresponds to activation of the “AUTO 4/1” function with the setting for “Extra Dry”..

“Extra dry” enhances the drying results if performance is reduced.

— The setting is validated automatically after 10 seconds if the

“

SET”button in not pressed again.

— The “A

UTO 4/1” light then illuminates permanently if this option has been selected.

• Your appliance automatically adapts to using multipurpose products when the water hardness is < 25°F.

“multi-purpose” light flashing

“Drying” light lit

“Rinsing” light lit

TTeessttiinngg ssttrriipp

HHaarrddnneessss

0-10°F 10-18°F 18-25°F

MMuullttii--ppuurrppoossee

pprroodduuccttss FFuunnccttiioonn DDeeaaccttiivvaatteedd

MMuullttii--ppuurrppoossee

pprroodduuccttss SSppaarrkklliinngg CClleeaann

MMuullttii--ppuurrppoossee

pprroodduuccttss

EExxttrraa DDrryy

OFF

6/ LOADING OF REGENERATING SALT

• Loading of regenerating salt (Fig 06)

Filling with salt is essential for providing a good wash without marks. It regenerates the resins that soften the water, by removing its lime content (unless the mains water supply is soft enough). Refer to “Setting the water softener”.

Important :

Only use special dishwasher regenerating salt. Do not use table salt or any type of cooking salt, this could damage your appliance’s water softener.

Unscrew and remove the stopper on the

salt tank.

Fill the tank with regenerating salt special-

ly designed for dishwashers.

Use the funnel supplied with your dishwasher. The first time, top up with water up to the rim of the tank.

•

Regenerating salt indicator:

This illuminates when salt must be added. After the tank has been filled with regenerating salt, the indicator light may remain lit until the salt has dissolved sufficiently, usually after one cycle (of if the tank has not been filled completely; for example, when first putting the machine into service using the sample). This can be deactivated as indicated in the paragraph “For multi-purpose products” setting table.

Important

If the salt overflows when filling the tank, to avoid oxidization of the tub it is advisable to remove the salt crystals or to run a Prewash programme (or Rapid programme depending on the model).

Fig. 06

SSaalltt

wwaatteerr

SEL

EAU

7/ LOADING OF RINSING PRODUCT

Important :

Only use a rinsing product designed for dishwashers. The rinsing product ensures your items shine and are well dried.

When first putting the machine into

service, fill the tank until the level is flush with the top of the adjustment lever. Pour in at least all the rinsing product provided. The tank contains 120 ml (approximately one glass)

The original setting is in the centre (middle position: reference mark 2). If you encounter marks or poor drying after a few cycles, you can adjust the setting using the adjustment lever

(fig 07

;

Reference mark 3 will

increase the setting).

- Close the tank lightly

••

Rinsing liquid indicator light:

This illuminates when rinsing product is required. It can be deactivated as shown in the paragraph “For multi-purpose products” setting table.

Important :

If any of the product overflows during filling, sponge up the excess to avoid producing foam.

BBAA

• Loading of rinsing product (Fig. 07)

Adjustment lever

Fig. 07

8/ YOUR DISHWASHER’S EQUIPMENT

Arrange your items so that the water can circulate freely and spray over all the utensils. Place large diameter dishes and pans at the sides. Do not intersperse, jam together or superimpose flat plates and concave dishes (Fig. 08). The flexible racking spikes makes it easier to arrange your large dishes (Fig. 09).

Advice:

When you re-insert the lower basket, ensure that nothing catches on the oversize plate barrier to avoid blocking the rotating spray arm.

Unloading your items

Empty the lower basket to avoid drips from the upper basket falling onto the lower basket.

• THE LOWER BASKET

Very important

Items not suitable for washing in a dishwasher:

- Wooden cutting boards

- Stainless steel utensils or plastic utensils that are not heat-resistant

- Copper or pewter items

- Glued crockery and cutlery

- Cutlery with wooden, horn or mother-of-pearl handles

- Antique or hand-painted porcelain When purchasing crockery, glasses or cutlery, ensure that it is dishwasher-safe

Fig. 09

Fig. 08

8/ YOUR DISHWASHER’S EQUIPMENT

Fig. 11

• THE UPPER BASKET

This basket is particularly designed to take glasses, cups, ramekins, small salad bowls, bowls and saucers. Arrange your items methodically to save on space (arranging glasses, cups or bowls together). You can also arrange cups, ladles, etc. on the folding cup racks (Fig. 10)

Advice:

Position the cavities of glasses, cups

or bowls facing downwards.

• Adjusting the height of the upper basket

For large dishes to be loaded in the lower basket, the upper basket must be set the to high position. This can be done with the basket fully loaded (Fig. 11)

①①

Setting in HIGH POSITION:

Gently raise your basket on each side until it engages.

②②

Setting in LOW POSITION: Raise your basket completely on both sides to unlock it and then lower it to the low position.

Important :

Check that the two slides are set to the

same height and the basket is horizontal.

Cutlery basket

Fig. 10

8/ YOUR DISHWASHER’S EQUIPMENT

Movable grills are available for if you wish to load your cutlery in an orderly manner

(Fig.

13). For optimum washing and drying, use these separation grills partially or totally.

Point the handles on the cutlery downwards.

Important :

For safety reasons, we recommend that you place knives with pointed ends with the point facing downwards in the cutlery basket (to avoid the risk of an accident). Long-bladed knives and other sharp kitchen utensils must be placed flat in the upper basket.

Avoid washing cutlery with horn handles in your dishwasher. Separate silverware from other metals using the separation grill.

• THE CUTLERY BASKET

Fig. 13

The cutlery basket slides to allow flexible loading.

It can be placed anywhere in the lower basket. You can therefore make a variety of loads depending on the items (Fig. 12).

If your cutlery items or your dishes are too large, alter the height setting for the upper basket.

Fig. 12

EN 9/ SETTING THE PARAMETERS

• SETTINGS POSSIBLE USING THE “SET” AND SELECTION BUTTONS:

1 long

press

•

1 long press on the “

SET”

button and then a short press

enables you to move on to the following parameters.

Set the parameters by pressing one of the programme selection buttons or the other.

Move on to the next parameter by pressing “SET”.

Display

Briefly

press

the “SET”

button once

and then

press one

other of the

selection

buttons

Advice:

The setting is confirmed automatically when you move on to the next parameter or if the

“Set” button is not pressed again within the next 10 seconds.

> Setting the clock (hour)

To do this, hold down the “S

ET” button. When the

time starts to flash, press one of the selection buttons or the other until you reach the desired time. Press S

to move on to the next parameter.

> Setting the clock (minutes)

Proceed in the same way as above; press one of the selection buttons or the other to set the minutes.

> Setting the water softener

Set to the level corresponding to the hardness of your water:

HH00

HH66

> Product use

You can cancel display of the relevant indicators, depending on the products used:

- Salt Set to

OOFFFF

if you do not use salt or f you

are using multi-purpose tablets.

- Rinsing product Set to

OOFFFF

if you do not use a

rinsing product or if you are using multi-purpose tablets.

> Multipurpose tablets and the “AUTO 4/1” function

- For optimum product performance (depending on the water softener setting table on page 43), set:

- to deactivate the “AUTO 4/1” function.

- to activate the “AUTO 4/1”

““EExxttrraa DDrryy””

func-

tion (default selection)

- to activate the “AUTO 4/1”

““SSppaarrkklliinngg CClleeaann””

function.

> Beep at the end of the programme

OOnn

to activate the function;

OOFFFF

if you do not wish not

to hear the beep at the end of the program.

> Screen brightness

Set the screen brightness to suit yourself from

LLuu11

minimum to

LLuu55

maximum.

oorr

EN 10/ WASHING PROGRAMMES

• PROGRAMMES TABLE

Air Drying

Resistant

VVeerryy ddiirrttyy

A large amount of

dried-on residue,

baked-on stains,

grease, residue from frying, cooked cheese, sauce, etc.

Mixed

Hot rinse

Air Drying

Hot rinse

Rinse

Washing at 70°C

Washing at 55°C

Hot pre-wash

NNoorrmmaallllyy ddiirrttyy

A normal amount of

dried-on, adhering

residue on every-

day items.

NNoorrmmaall

Air Drying

Mixed

NNoorrmmaallllyy ddiirrttyy

A normal amount of

dried-on

and greasy residue

everyday items.

Faster, but

consumes more

energy.

Hot rinse

Rinse

Washing at 65°C

Pre-wash Pre-wash

These values refer to normal conditions of use with separate products (detergent, salt, rinsing product). They may vary according to the load, the temperature,

if you use combined washing products,

the

water hardness and the supply voltage.

IITTEEMM TTYYPPEE

((ppoorrcceellaaiinn,, ppaannss,, ccuutt--

lleerryy,, ggllaasssseess))

FFOOOODD RREESSIIDDUUEE::

QQuuaannttiittyy,, ttyyppee aanndd

aammoouunntt

PPRROOGGRRAAMMMMEESS

PPRROOGGRRAAMMMMEE

SSEEQQUUEENNCCEE

AAss aann iinnddiiccaattiioonn oonnllyy::

DDuurraattiioonn iinn mmiinn

WWaatteerr ((LL))

EEnneerrggyy ((KKwwhh))

130’

1,7

90’

1,5

130’

1,3

EN 10/ WASHING PROGRAMMES

Mixed

Air Drying

Hot rinse

VVeerryy sshhoorrtt 3300--

mmiinnuuttee

wash

specially designed

for a small amount

of daily items with a

limited amount of

non-greasy residue,

not dried on.

Air Drying

AAuuttoommaattiiccaallllyy

ddeetteeccttss tthhee aammoouunntt

ooff wwaasshhiinngg uupp aanndd

tthhee lleevveell ooff ssooiilliinngg..

Normal amount of

dried on residue on

everyday items.

Faster, but

consumes more

energy.

Hot rinse

Glassware

Rinse

Washing at 45°C

Natural drying

Hot rinse

Rinse

Washing at 45°C Washing at

55/

65°C

RRaappiidd

FFrraaggiillee

FFoorr ddeelliiccaattee ggllaass--

sseess aanndd ddiisshhwwaarree..

This

CCrryyssttaall ++ feature maintains the shine of your

glasses longer by

automatically adjusting the

optimum softener

level depending on

the water hardness.

Pre-wash

Mixed

Air Drying

Hot rinse

Rinse

Washing at 50°C

NNoorrmmaallllyy ddiirrttyy

Recommanded for

normally soiled

load, less consum-

ing in energy.

90’ - 110’

17 - 19

1,3 - 1,5

145’

1,05

85’

0,8

30’

0,8

11/ PROGRAMMING

Advice:

Consult the Programmes table on the preceding pages to determine the programme you

need for the type of items, the quantity and the amount of food residue.

•

Starting the appliance

Press the “

OOnn//

Off” button to switch the

machine on.

•

Starting a programme immediately

Select your programme by pressing one of the selection buttons .

— The Auto programme can be accessed by pressing the “ICS” button .

— The fbutton scrolls the programmes to the left (if the “BOOST” programme is selected, pressing this button causes the “Rapid ” programme to be selected).

— The button scrolls the programmes to the right (if the “Rapid ” programme is selected, pressing this button causes the “BOOST” programme to be selected).

— When a programme is selected, the relevant indicator light illuminates. The screens shows the envisaged time that the programme will end.

Press “Start/C” ; the programme starts and the screen shows the amount of time remaining for the programme.

A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.

Programme time remaining, progress

Finishing time

Fig. 02

End of programme

11/ PROGRAMMING

•

Delaying the end of a

programme

Programme the finishing time, in quarter of an hour stages, by pressing the + or – buttons until you reach the desired time.

Confirm by pressing “Start” . The screen counts down hour by hour until the programme starts.

•

Cancelling a programme

Hold down the “Start / Cancel” button for a few seconds.

•

Stopping the appliance

When the programme has finished, press the “On/Off” button .

•

Setting the audible signal

The setting enables you to activate or de-activate the beep at the end of the programme.

— Access the setting holding down the “SET” button until you hear a double signal (long beep). Keep on pressing “Set” successively until you have access to the parameter:

The setting is confirmed automatically after 10 seconds or by pressing “SET” (switching to the next parameter “Screen brightness”).

Waiting for delayed start

Programme time remaining, progress

End of programme

Beep activated

Beep de-activated

EN 12/ YOUR DISHWASHER’S SAFETY SYSTEMS

•

Door poorly closed

After confirming the programme (“Start” button), your dishwasher issues three short high-pitched beeps to indicate that the door is not closed and the light for the selected programme flashes.

•

Programme access lock

Throughout the period the programme is running, or the full duration of the programme, the programme selector and the buttons are automatically protected from any kind of manipulation. This unlocks automatically at the end of the programme or when the programme is can-

celled by holding down the “Start” button for 3 seconds.

•

Advice on cleaning the filters

Approximately every month, your dishwasher advises you to proceed to service the filters (see Section “Cleaning the waste filters” - Fig. 14-15).

•

Anti-overflow system

This system activates the drain pump automatically if the water in the tank reaches an abnormal level.

•

Anti-leak protection system

This system cuts off the water supply if a leak is detected under the appliance.

•

Total safety

This supply pipe is fitted with a device to cut off the water supply directly at the tap if there is a leak.

•

Alarm light

For programme errors or incidents (please refer to Section 14 "If an operating abnormality

occurs").

NB:

To unlock, hold down the Start / Cancel button for three seconds.

•

SAFETY SYSTEMS

EN 13/ CLEANING YOUR APPLIANCE

Fig. 15

The filtration system consists of several elements:

The waste filter

The large main filter

The micro filter

The filters are located in the centre of the tub and must be washed regularly to obtain optimum washing results.

Actions :

➀➀

Before removing the filters, remove any waste on the large main filter with a sponge so that the waste does not block the sprinkler arms. Rotate the spray arm as shown in the drawing. (Fig. 14)

➁➁

Loosen the waste filter a quarter of a turn

and then remove it

③③

Remove the main filter

④④

Remove the micro filter

⑤⑤

Carefully clean filters

and

under running water (Fig. 15)

Re-installation:

Proceed in reverse order, inserting filters and and then

Important :

Remember to lock the waste filter in place by pushing it in fully and turning it a quarter turn.

AABB

CCBBAA

• CLEANING THE WASTE FILTERS

Fig. 14

➁➁

③③

④④

⑤⑤

➀➀

AA BB CC

EN 13/ CLEANING YOUR APPLIANCE

•

Periodically

Every 3 or 4 months, in order to remove any deposits, run a special maintenance programme, without any items in the machine, using a special dishwasher cleaning product.

Important :

Keep this product out of children’s reach.

•

If not using your dishwasher for a prolonged period:

Clean your dishwasher completely and then unplug it from the electricity supply and close the water tap. Protect your machine from potential frost.

Advice :

Do not use abrasive powders, metal sponges and alcohol-based or thinner-based products. Use a cloth or a sponge. If you are moving house, run a soaking programme first of all, in order to avoid any water escaping.

14/

IF OPERATING ABNORMALITIES OCCUR

• BEFORE CALLING FOR SERVICE

Problem Possible Causes What to do?

The door falls heavily when opened (integratable model)

- Door springs not tensioned enough to compensate for the weight of the panel.

- Tighten the two tensioning screws accessible in the bottom section above the front feet.

The door does not stay horizontal when open or returns too

quickly

(integratable model)

- Door springs tensioned too much.

- No wooden panel.

- Loosen the two tensioning screws accessible in the bottom section above the front feet.

- Fit a temporary wooden panel on the appliance and adjust the springs.

The door catches when closing - Appliance not stable

- Door not centred on the tub

- Adjust the feet.

- Re-centre by adjusting the rear feet.

The upper basket does not stay in the high position

- Poor manipulation (the basket is being pulled upwards too quickly)

- Act more progressively (see instructions), one side and then the other.

Small leak around or under the appliance (move the appliance to locate the leak)

- Leak from the tap.

- Leak from the appliance. (Cf. table fault d07).

- Check that a seal is fitted and retighten the nut.

- Close the water tap and call a technician.

Small leak at the door

- Appliance not stable or not level

- Door not centred on the tub.

- Adjust the feet.

- Re-centre by adjusting the rear feet.

• SUMMARY OF THE FAULTS



Flashing LED(s) for models without a display



Flashing LED(s)







d01 : water supply fault (tap) d07 : overflow / anti-leak fault







d02 : draining fault

d08 : sprinkling distribution fault









d03 : heating fault d11 : pressure sensor fault





d04 : temperature fault

d12 : filling fault (water inlet

detection system)









d05 : fault – motor under load d13 : overheating fault









d06 : fault - motor overload

d14 : pump filling fault or insuffi-

cient flow from the water tap.





14/

IF OPERATING ABNORMALITIES OCCUR

• RELATING TO PROGRAMMING, DISPLAY

Problem Possible Causes What to do?

The cycle lasts too long - The energy-saving program-

mes last longer because the agitation and drying times are longer to compensate for the lower washing and drying temperatures

- Use these programmes preferably at night when it is not so important how long the programme lasts or when it ends.

The appliance trips the circuit breaker

- Insufficient amperage to supply all the appliances being operated simultaneously.

- Internal fault in the appliance.

- Check the socket’s amperage (10A minimum) and the meter’s capacity.

- Call a technician.

The appliance does not start - No mains power to the socket.

- Tap closed (Cf. table fault d01).

- Water supply hose kinked.

- Selection error or programme blocked

- Start button pressed too long (greater than 2 secs).

Appliance in Safety mode (antileak)

(Cf. table fault d07).

- Check the socket and the fuse

- Check the tap is open.

- Check the hose line is OK.

- Cancel by holding down Start for 3 secs and re-programme.

- Just press Start briefly to start the programme.

- Call a technician.

• THE INDICATOR LIGHTS

Problem Possible Causes What to do?

The salt light does not go out - No salt or an insufficient quan-

tity of salt in the tank to trigger the float.

Refill the tank and wait for the cycle to end. If you have soft water that requires no salt, the light is constantly lit.

The lights all light up one after the other

A light flashes and the programme does not start

- Wrong programme.

Programme selector wrongly positioned (between two notches)

- Cancel the current programming by holding down the Start button for 3 seconds and then re-programme.

- Reposition the selector on a programme.

14/

IF OPERATING ABNORMALITIES OCCUR

Problem Possible Causes What to do?

Food traces and deposits in the glasses

- Items poorly arranged (masked by another larger item or situated underneath it, items nested or jammed together).

- Upper spray arm blocked by cutlery or a dish etc.

- Filter poorly locked and lifting during washing.

- Micro filter screen clogged.

- One or more holes in the spray arm blocked.

- Arrange the items properly. Use the most appropriate areas and accessories for each type of item (see instructions).

- Check that the spray arm rotates freely. Set the basket in the high position if necessary.

- Check the filter’s facing and that the filter is locked in place (push it in fully, turning it to the right)

- Remove all the filters and clean them (in warm water), including the micro filter’s screen (once a month).

- Remove the spray arm by turning the lever a quarter of a turn and clean it under the tap (do not use any tool that could damage the holes). Re-install the spray arm.

Traces of grease - Detergent dose too low; ineffi-

cient detergent; stale product.

- Inappropriate programme (temperature too low; duration too short).

Increase the dose; try another detergent.

- Select a programme with a higher temperature.

• POOR WASHING RESULTS

Problem Possible Causes What to do?

The appliance will not restart - Door opened during a

washing cycle.

- Wait for the time delay to end (controlled internally by the appliance).

The appliance does not drain

(Cf. table fault d02).

- The cover has not been removed from the sink’s U-bend.

- Drain hose kinked.

- Filters totally blocked.

- Pump blocked.

- Remove the cover.

- Check the drain hose line behind the machine is OK.

- Remove and clean the filters and the drain.

- Initiate a Soaking programme

If the fault persists, call a technician.

14/

IF OPERATING ABNORMALITIES OCCUR

• POOR WASHING RESULTS...

Problem Possible Causes What to do?

White marks (identify what type)

- Chalky film (removable with vinegar).

- Traces of salt (items have a salty taste).

- Check that there is salt in the tank (light unlit = OK).

- Check the water hardness at the tap and that the water softener is set correctly. Adjust it to a higher level if necessary.

- Water too hard for using a “4in-1” detergent without the addition of salt.

- Check that the stopper on the

salt container is closed correctly.

White marks (identify what type)

- Glass cloudy because water too soft (cannot be removed).

- Check the water hardness at the tap and that the water softener is set correctly. Some detergents in pellet form are more aggressive to glasses and decorations (change the product and use a protective product if necessary).

Coloured marks (tea, wine, coffee)

- Items poorly arranged

- Detergent dose too low; inefficient detergent

- Programme temperature too low.

- If you use a multifunction product.

- Turn the cavities in the items towards the jets.

- Increase the dose; try another detergent.

- Select a more suitable programme

with a higher temperature.

- Use the “4-in-1” option (depending on the model).

Streaks or dried droplets on glasses

- Lack or insufficient amount of rinsing product.

- Rinsing product out-of-date or

inefficient.

- If you use a multifunction

product.

- Check the indicator light and fill the tank completely. Adjust the dispensing unit to a higher position if necessary.

- Use a recent product (a good product dilutes easily and foams in cold water).

- Use the “4-in-1” option with a setting prioritizing drying (parametering from the menu – depending on the model).

Dried-on marks on glasses, dullness.

- If you use a multifunction product.

- Use the “4-in-1” option with a setting prioritizing brilliance (parametering from the menu – depending on the model).

14/

IF OPERATING ABNORMALITIES OCCUR

Problem Possible Causes What to do?

A lot of droplets on the glasses - Lack or insufficient amount of

rinsing product.

- The dose has not been distributed.

- Positioning of the items.

- Check the indicator light and fill the tank completely.

- If the tank is not empty after approximately 60 washings, call a technician.

- Arrange the items to restrict water retention as much as possible. Leave the door ajar for a few minutes, if possible

Droplets on plastic items, Tefal coatings, etc.

- These items have a low calorific mass.

- Arrange the items in the upper basket.

Poorer drying on rapid programmes

On rapid programmes, the drying temperature and drying period are reduced to cut down the duration of the cycle as much as possible.

- Leave the door ajar for a few minutes.

Condensation on the wall of the inside door or the tub.

Condensation may form on the walls, particularly after the appliance has cooled down (sound insulation increases this occurance)

• POOR DRYING RESULTS

• POOR OPERATION

Problem Possible Causes What to do?

Constant filling

A lot of waste on the large filter at the end of the cycle.

- Drain hole situated too low for the appliance (Cf. table fault d012).

- The filters and drain outlets are blocked with too much residue.

- Drain wand has fallen on the floor.

- Remove and clean the filters and the bottom of the drain outlets. Remove large residue from the plates before putting them in the machine.

Traces of rust on stainless steel - Quality of the stainless steel ;

not dishwasher-safe (knives in particular)

- Use “special dishwasher-safe” cutlery.

- Check that the lid on the salt container is closed correctly.

14/

IF OPERATING ABNORMALITIES OCCUREN

••

CHANGING THE BULB

You can change the bulb (halogen type G412V-5W) located on the left under the top cover. To do this:

Important :

Unplug the power cable before chan-

ging the bulb.

(depending on the model) — Remove the top cover by unscrewing the two screws under the top cover’s lip (Fig. 16

). — Remove the top cover by unclipping it from the back of the appliance and then pushing it a few centimetres (Fig. 16 ). — Lift off your dishwasher’s top cover (Fig. 16

). — Remove the 2 top screws from the protective plate and remove the plate (Fig. 16 ).

Important :

For safety reasons, do not touch the

two other screws.

— Open the cover by pinching the 2 clips (Fig. 16 ). — Remove the bulb/bulb holder assembly from its housing (Fig.16 ).

Important :

Use a soft cloth to manipulate the bulb.

— Change the bulb by freeing it from its housing (Fig.16 ). — To re-install the bulb, follow the above instructions in reverse order.

Fig. 16

Screw

(depending on the model)

ENEN

15/

AFTER-SALES SERVICE

Fig. 17

••

INTERVENTION WORK

Any intervention work on your appliance must be performed by a qualified professional approved by the manufacturer. When you call, please mention the full reference for your appliance (model, type and serial number). This information is shown on the description plate (see Fig. 17)

ORIGINAL PARTS

When maintenance is being carried out, ask for only certified original spare parts to be used.

•

Details common to all models

— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 standard place settings — Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Figs. A-B-C; see next page — Loading as per the indications on next page, without side shelves — Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position — Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - - 3

— Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - - H2

For detailed information on the comparison tests regarding the level of soiling, the types of crockery and cutlery, etc., contact the equipment manufacturer before commencing the tests.

•

Tests to Standard EN 50242:

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - — Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30g of detergent B

•

Tests according to the mixed IEC 436/DIN 44990 method

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - “Eco” — Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 + 25g.

NB:

When conducting tests using a multi-function tablet: H0 or H1 or H2

- Check that the water softener is correctly set for the water hardness — Pull out the detergent distribution drawer and place the tablet in the interior compartment.

•

Measuring the noise level in accordance with Standard EN60704-2-3:

— Align the plinth on the housing unit with the door panel.

15/

INDICATIONS FOR THE TESTING LABORATORIES

15/

INDICATIONS FOR THE TESTING LABORATORIES

1 2 3 4 5 6 7 8

1 1

2 2 2 2 2

332

333333 2

222

NNOOKK NNOOKK OOKK

444444

1888

111

444

885

444

NOTES

Brandt Appliances - SAS au capital de 10.000.000 euros - RCS Nanterre 440 302 347 B3798-B-1/3-

01/07

PPhhoottooggrraapphhiiee ddee ccoouuvveerrttuurree//ffrroonntt ccoovveerr pphhoottooggrraapphhyy:: MMiicchheell GGiibbeerrtt

Any maintenance on your equipment should be undertaken by:

- either your dealer,

- or another qualified mechanic who is an authorized agent for the brand appliances. When making an appointment, state the full reference of your equipment (model, type and serial number). This information appears on the manufacturer's nameplate attached to your equipment.

Les éventuelles interventions sur votre appareil doivent être effectuées :

- soit par votre revendeur,

- soit par un autre professionnel qualifié dépositaire de la marque. Lors de votre appel, mentionnez la référence complète de votre appareil (modèle, type et numéro de série). Ces renseignements figurent sur la plaque signalétique fixée sur votre appareil.

Eingriffe an Ihrem Gerät dürfen nur:

- von Ihrem Händler oder

- von einem sonstigen Fachmann und Vertragshändler der Marke durchgeführt werden. Geben Sie bei der Meldung einer Störung die vollständige Typenbezeichnung Ihres Gerätes an (Modell, Typ, Seriennummer). Diese Angaben finden Sie auf einem an Ihrem Gerät angebrachten Schild.

Las intervenciones que requiera la máquina deberán ser efectuadas:

- por el revendedor,

- o por cualquier profesional cualificado depositario de la marca. Al llamar, mencione la referencia completa de la máquina (modelo, tipo y número de serie). Estos datos figuran en la placa de identificación situada en la máquina.

Qualquer intervenção no seu aparelho deve ser realizada:

- quer pelo seu revendedor,

- quer por outro profissional qualificado autorizado pela marca. Ao chamá los, indique a referência completa do seu aparelho (modelo, tipo e número de série). Estas informações figuram na placa de identificação fixada no aparelho.

Eventuel vedligeholdelse af apparatet skal foretages:

- enten af Deres forhandler,

- eller af en kvalificeret fagmand, som er anerkendt til dette mærke. Når De ringer op, skal De angive apparatets fulde reference (model, type, serienummer). Disse oplysninger står på typeskiltet, der sidder på apparatet.

After Sales Service:

Service après vente :

Kundendienst :

Servicio postventa :

Serviços autorizados :

Kundeservice :

De eventuele ingrepen in de machine moeten worden uitgevoerd :

- of door uw vakhandelaar,

- of door een andere gekwalificeerd technicus van dit merk. Tijdens het telefoneren, dient u de complete referentie op te geven van uw machine (model, type, serienummer). Deze informatie staat op het typeplaatje op de machine.

Wszelkie czynności serwisowe wykonywane na urządzeniu muszą być wykonane przez:

- sprzedawcę,

- wyspecjalizowany zakład naprawczy posiadający atest producenta. Aby przyspieszyć i ułatwić obsługę prosimy o podanie dokładnych danych dotyczących urządzenia (model, typ, numer seryjny). Wszystkie te dane znajdują się na tabliczce znamionowej umieszczonej na urządzeniu.

Případné opravy na přístroji může provádět pouze :

- váš prodejce

- nebo záruční opravna, která má smlouvu s výrobcem Při telefonickém styku uvádějte úplné označení vašeho přístroje (model, typ a výrobní číslo). Tyto údaje jsou uvedeny na výrobním štítku přístroje.

    ,   :

-  ,    ;

-  ,      .           (,    ). !     ",   .

Οι ενδεχόμενες επεμβάσεις πάνω στη συσκευή σας θα πρέπει να διενεργούνται:

- είτε από τον προμηθευτή σας,

- είτε από το κατά τόπους εξουσιοδοτημένο σέρβις. Σε περίπτωση που τηλεφωνήσετε, θα πρέπει να αναφέρετε όλα τα στοιχεία της συσκευής σας (μοντέλο, τύπο και αριθμό σειράς).Τα στοιχεία αυτά αναγράφονται στην ετικέτα των χαρακτηριστικών του κατασκευαστή που βρίσκεται πάνω στη συσκευή.

Serviceafdeling:

Usługi serwisowe :

Záruční servis:

Cepcoe ocyae:

Tεχνική υποστήριξη:

DVH740,-

DE DIETRICH DVH740WE1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual