DE DIETRICH DVF1280 User Manual

32

-

Dear Customer,

You have just acquired a

DDEE DDIIEETTRRIICCHH

dishwasher and we would like to thank you.

Our research teams have created this new generation of appliances for you. Their
quality, design, features and technological advances make them exceptional products,
and reveal our unique know-how.

Your new

DDEE DDIIEETTRRIICCHH

dishwasher will blend harmoniously into your kitchen and will
perfectly combine washing and drying performance and ease of use. We wanted to offer
you a product of excellence.

In the

DDEE DDIIEETTRRIICCHH

product range, you will also find a wide choice of hobs, ovens,
microwaves, hoods, cookers, fridges, freezers, that you can coordinate with your new
DDEE DDIIEETTRRIICCHH

dishwasher.

Visit our website

wwwwww..ddee--ddiieettrriicchh..ccoomm

, where you will find our latest innovations as well

as useful and complementary information.

DDEE DDIIEETTRRIICCHH
Setting New Values

As part of our commitment to constantly improving our products, we reserve the right to
make changes to them based on technical advances to their technical and functional
features and appearance.

WWaarrnniinngg ::
BBeeffoorree iinnssttaalllliinngg aanndd uussiinngg yyoouurr aapppplliiaannccee,, pplleeaassee ccaarreeffuullllyy rreeaadd tthhiiss GGuuiiddee

ttoo IInnssttaallllaatti

ioonn aanndd UUssee,, wwhhiicchh wwiillll aallllooww yyoouu ttoo qquuiicckkllyy ffaammiilliiaarriissee yyoouurrsseellff wwiitthh iittss

ooppeerraattiioonn..

33

CONTENTS

EN

1 / FOR THE USER’S ATTENTION

• Safety instructions ______________________________________ 34

• Environmental protection ________________________________ 35

• Economical, environmentally friendly washing ________________ 35

2 / DESCRIPTION OF YOUR APPLIANCE

• General presentation of the dishwasher ____________________ 36

• Control panel __________________________________________ 37

3 / INFORMATION ____________________________________________ 38

4 / WHAT TO DO BEFORE FIRST USING THE MACHINE

• Measure the water hardness and select the type of detergent __ 39

• Hardness table__________________________________________ 39

5 / WATER SOFTENER ADJUSTMENTS __________________________ 40

6 / ADJUSTING THE SETTINGS

•“SET” setting __________________________________________ 41

•“4/1” setting ____________________________________________ 41

7 / LOADING THE DETERGENT PRODUCTS ______________________ 42

8 / LOADING THE REGENERATING SALT ________________________ 43

9 / LOADING THE RINSING PRODUCT____________________________ 44

10 / YOUR DISHWASHER’S EQUIPMENT

• The lower basket ________________________________________ 45

• The upper basket ________________________________________ 46

• Cutlery drawers ________________________________________ 47

11 / WASHING PROGRAMMES __________________________________ 48

12 / PROGRAMMING __________________________________________ 50

13 / CLEANING YOUR APPLIANCE

• Cleaning the waste filters ________________________________ 52

14 / YOUR DISHWASHER’S SAFETY SYSTEMS ____________________ 54

15 / IF OPERATING ABNORMALITIES OCCUR ____________________ 55

16 /

AFTER-SALES SERVICE ____________________________________ 60

17 / INDICATIONS FOR THE TESTING LABORATORIES ____________ 62

Important :

Keep this user’s manual with your appliance. If the appliance is sold or transferred to
someone else, ensure that the manual is with it. Please take note of these instructions before
installing and using your appliance. They have been drawn up for your own and other
people’s safety.

• SAFETY INSTRUCTIONS

• Installation

— When you receive your appliance, unpack it or have it unpacked immediately. Check that it has
not suffered any damage during transport. Express any reservations in writing on the delivery note,
of which you keep a copy. Never connect up a damaged machine. If your appliance is damaged,
please contact your dealer.
— Before proceeding to connect up your machine, please refer to the instructions in your
Installation Guide.
— Your dishwasher must be kept disconnected from the mains supply throughout the whole of the
installation process.
— The electrical connection details on your appliance’s description plate must comply with those
for the mains supply.
— The socket must still be accessible once your appliance has been installed.
— Do not alter or attempt to alter the appliance’s characteristics. This could put you at risk.
— If your installation has to be altered, only entrust the electrical and plumbing work to a qualified
electrician or plumber respectively.
— Your appliance is designed for normal domestic use. Do not use it for industrial or commercial
purposes or for any other purpose than that for which it has been designed.
— Your appliance is designed to be used for household and similar applications such as:

• staff kitchenettes in shops, offices and other professional environments,

• farmhouses,

• use by guests at hotels, motels and other residential-type facilities,

• bed and breakfast type facilities.

— The dishwasher’s walls must not be pierced under any circumstances.

• Children’s safety

— This appliance is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the appliance safely.
— This appliance must only be used by adults. Ensure that children do not touch it and do not use
it as a toy. Ensure that they do not operate the appliance’s controls.
— Keep young children away from the appliance when it is operating.
— Detergents contain irritant and abrasive substances. These products can have caustic effects on
the eyes, the mouth or the throat. They can be extremely dangerous if ingested. Avoid any contact
with the skin and the eyes. Ensure that the appliance’s detergent container is empty at the end of
the washing cycle.
— Place detergents out of children’s reach and do not put any detergent in the machine until just
before you start the washing programme.
— The water in your dishwasher is not drinking water; this is why children must not go near the
appliance when its door is open.
— Do not allow children to play with or sit on the door when it is open, as the dishwasher could
overturn.
— Once you have unpacked your appliance, place the packaging out of children’s reach.
— Keep all the packaging materials (e.g. plastic bags, polystyrene, etc.) out of children’s reach
because they can be dangerous for children (ie. risk of suffocation).

34

1 / FOR THE USER’S ATTENTION

EN

• Use

— This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
— When machine is running, do not open door. This may provoke steam leakage or splattering of
water.
— Only use products specially designed for your dishwasher (water softening salt, detergent and
rinsing products).
— As far as possible, avoid opening the dishwasher’s door when it is operating, and in particular
during the heating phases, because scalding steam may escape or you may be splashed with hot
water. The machine is fitted
with a safety system that immediately blocks the dishwasher’s operation if the door is opened.
— Never use chemical solvents in your appliance because these could cause an explosion.
— Always close your appliance’s door after loading or removing your items.
— Do not lean or sit on your appliance’s door when it is open.
— You are strongly advised to disconnect the machine after use and turn off the water supply.
— Unplug your machine before carrying out any technical work on it.
— Avoid placing your machine immediately next to a cooking or heating appliance to prevent any
risk of heat damage;
— Do not place any items in your machine, which are not certified as dishwasher safe.
— If you have removed an item before the end of the washing programme, it is important to rinse it
carefully to remove any residual washing products.
— If your appliance breaks down, never attempt to repair it yourself. Any repairs made by
non-qualified personnel can cause significant damage or lack of control.
— The machine complies with applicable safety regulations. Any repairs should be carried out by
qualified technicians. Repairs or changes that do not conform may be dangerous for the users.
In case of replacement, only use original parts.
— If the machine malfunctions due to other causes than those mentioned in this booklet, disconnect
the machine (remove the plug) or break the circuit concerned and contact after-sales service.

•

ENVIRONMENTAL PROTECTION

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by
dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this
label to indicate that in countries that are a members of the European Union the used
appliances should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in
compliance with European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment. Contact your town hall or your retailer for the used appliance collection points
closest to your home.
We thank you doing your part to protect the environment.

• ECONOMICAL, ENVIRONMENTALLY FRIENDLY WASHING

— Remove any food residue from your crockery (bones, pips, etc.)
— Do not pre-wash your items by hand (useless waste of water).
— Utilise your dishwasher’s capabilities to the full for an economical, environmentally friendly wash.
— Always select a washing programme suitable for the crockery type and how dirty they are.
— Avoid overdosing with detergent, regenerating salt and rinsing liquid. Follow the
recommendations in this guide (pages 39-40-41) and the instructions on the product packs.
— Ensure that the water softener is correctly set (see page 40).

35

1 / FOR THE USER’S ATTENTION

EN

36

2 / DESCRIPTION OF YOUR APPLIANCE

EN

Tip :

This user’s guide is valid for different models. Some details and features of your appliance

may differ slightly from the descriptions given in the guide.

• GENERAL PRESENTATION OF THE DISHWASHER

LL

Fig. 01

AA

BB

CC

DD

FF

GG

HH

JJ

KK

II

EE

Cutlery drawers

Upper basket

Wash product dispenser

Anti-block guide wire

Lower sprinkler arm

Waste filter

Salt compartment

Main filter

Lower basket

Rinse aid dispenser

Reference plate (Ref. S.A.V.)

Control panel

LL

KK

JJ

II

HH

GG

FF

EE

DD

CC

BB

AA

-------------------------------------------------------------- or --------------------------------------------------------------

FF

37

2 / DESCRIPTION OF YOUR APPLIANCE

EN

• CONTROL PANEL (SOME MODELS ONLY)

On/ Off :

Press this button to start up the dishwasher.

Selection buttons :

For choosing the programme (see page 50).
For enabling multi-function product
adjustment (see page 41).

Set, Delayed end

:

Changing the settings (see page 40 and 41).
Adjusting the time delay (see page 50).

Programme selected indicator

:

Pilot light on : this indicates the programme
has been selected.

Display :

This shows the current time, the programme
end time, the remaining programme time and
the setting adjustments.

START/C :

Press this button to start up the programme.
In case of error, hold down this button for a
few seconds to cancel a selection or a
programme that is already running.

Pilot lights :

Salt :

On : indicates the salt compartment is empty
or almost empty.

Rinse aid :

On : indicates the rinse aid compartment is
empty or almost empty.

Multi-function products :

On : this indicates the “4/1” function is
activated (see page 39 and 41). The
programmes are automatically adapted
to multi-function products.

Current program :

On : indicates the programme is running.

Delayed start :

On : indicates the programme is in time delay
mode (see page 50).

FF

GG

EE

DD

CC

BB

AA

Observations :

A short beep confirms the button has been pressed (except the “On/Off” button).

Fig. 02a

AA

EE

CC

GG

BB

DD

For power saving purposes, this dishwasher automatically goes onto standby if it has not been

activated for a certain period (except in time delay mode).

All the pilot lights will switch off except the programme in progress, which will flash.

To exit standby mode, simply press the “START” button. The dishwasher will then go into its

previous status.

38

3 / INFORMATION

EN

•

There are so many different types
of product. How can I choose the
best one ?

For impeccably clean dishes,
you should use a combination
of classic products :

①①

Wash product

for perfectly clean

dishes (powder or liquid detergent or

standard tablets).

②②

Dishwasher salt

for correct

functioning of your dishwasher’s water

softener.

③③

Rinse aid

to help the dishes dry

and eliminate drop marks

.

Important :

For your dishwasher to provide

excellent washing and drying results and

leave no marks, you must correctly adjust it

using the water softening system, which

works with dishwasher salt.

•

Scale,

when rainwater filters into the soil,

it takes in mineral salts, some of which are

found in solid form and are commonly

referred to as scale. Scale in the water

reduces the detergent’s washing efficiency,

causes deposits to form on the dishwasher

itself and leaves white marks on the dishes.

The more scale there is in the water, the “harder”

the water is.

You should use products suited to the water

hardness in your particular area.

Important :

Never use normal washing-up liquid.

For ease of use and in certain water
hardness conditions only (< 25°F),
multi-purpose products

can make the

use of regenerating salt and rinsing liquid

unnecessary.

• “Two-in-one” tablets

contain

detergents and rinsing liquid or an

agent serving the function of the salt.

• “Three-in-one” tablets

contain

detergents and rinsing liquid as well as

an agent serving the function of the salt.

• “Four-in-one” “Five-in-one”
tablets...

also contain additives to

prevent “wear” to glasses (i.e. to stop

them clouding), risk of corrosion and

discolouring of stainless steel.

Important :

Follow the instructions in the user’s

manual and the recommendations on the

multi-purpose detergent’s pack.

NB :

If in any doubt, please contact the

detergent’s manufacturer if the items are

very wet at the end of the programme or if

chalky deposits appear.

39

4 / WHAT TO DO BEFORE FIRST USING THE MACHINE

EN

• HARDNESS TABLE

Possible use of

traditional products

➊

Use only of

traditional products

➊

multi-function products ➋

R

+

oorr oorr

oorr

+

R

+

oorr oorr

+

➋

➊

TTeesstt ssttrriipp

HHaarrddnneessss

0-10°F

0-1mmol/l

0 - 5,6 °dH

10-18°F

1-1,8mmol/l

5,6 - 10 °dH

18-25°F

1,8-2,5mmol/l

10 - 14 °dH

25-40°F

2,5-4mmol/l

14 - 22,4 °dH

40-55°F

4-5,5mmol/l

22,4 - 30,8 °dH

55-70°F

5,5-7,0mmol/l

30,8 - 39,2 °dH

> 70°F

>

7,0mmol/l

> 39,2

°dH

WWaatteerr

Soft

Slightly hard Slightly hard

Hard Hard Hard Very hard

WWaatteerr ssooffttee--

nniinngg aanndd uussee

ooff ssaalltt

Optional

Essential if

using traditional

products

Essential if

using traditional

products

Mandatory Mandatory Mandatory Mandatory

• MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETER­GENT: TRADITIONAL OR MULTI-PURPOSE

In one simple action, you can test the your water’s lime content using the testing strip supplied with

your dishwasher. Alternatively, contact your local water utility to ascertain your water’s hardness.

— Let the water run from the tap for a few moments.

— Fill a glass with water.

— Take the test strip from its holder and immerse it for 3 seconds.

— Wait 1 minute, shake it and look at the colours to ascertain your water’s hardness.

➊

TTrraaddiittiioonnaall pprroodduuccttss:: PP: PP

owder detergent orLL: LLiquid detergent or single tablet

+ SS: Regenerating SSalt + RR: RRinsing product

➋

MMuullttii--ffuunnccttiioonn pprroodduuccttss::

Multi-function tablets

40

EN

Important :

IIt is essential to correctly adjust the water softener according to the hardness of the water in

your area.

-If the adjustment is too low, scale may be left on the dishes.

-If the adjustment is too high, there is a risk of glasses becoming cloudy.

If you move house, adjust the water softener again.

5 / WATER SOFTENER ADJUSMENTS

• Proceed as follows to adjust the water softener to the control table :

Fig. 02b

—

This adjustment is to be done at the “SET” Adjustment stages (see page 41).

— To change the adjustment between

HH00

and

HH66

, according to the water hardness (see the table

below), briefly press the up or down buttons

successively.

The display will indicate the adjustment

.

— Make sure you validate the adjustment by briefly pressing “Start/C” twice (to exit the “SET”

Adjustment menu, see page 11).

— To use multi-function tablets you must select adjustment H0 or H1 or H2, according to the water

hardness. < 25ºF. Make the adjustment as indicated on page 41.

Important :

Adjustment H0 disables the salt refill indicator light.

HHaarrddnneessss

0-10°F

0-1mmol/l

0 - 5,6 °dH

10-18°F

1-1,8mmol/l

5,6 - 10 °dH

18-25°F

1,8-2,5mmol/l

10 - 14 °dH

25-40°F

2,5-4mmol/l

14 - 22,4 °dH

40-55°F

4-5,5mmol/l

22,4 - 30,8 °dH

55-70°F

5,5-7,0mmol/l

30,8 - 39,2 °dH

> 70°F

>

7,0mmol/l

> 39,2

°dH

AAddjjuusstt
mmeennttss

HIH0 H2 H3 H4 H5 H6

41

EN

6 / ADJUSTING THE SETTINGS

The adjustments will be stored in the memory after validating the last setting.

If you cancel (by holding down the “START” button) or switch off the appliance during adjust­ment, the setting changes will not be registered

.

•

Hold down the “Set” button once to access the adjustment menu.

•

Adjust the settings using the programme selection buttons .

•

Briefly press the “Start” button once to go on to the next setting.

> Adjusting the water softener

Adjust this to the corresponding degree for the water hardness measured, from

HH00

to

HH66

(see page 40).

Press “Start” to go on to adjustment of the next setting.

• “SET” SETTING

> End of programme beep

Adjust to to activate this function, or if you do not require an end-of­programme beep.

Press “Start” to save the settings

> Multi-function products

Select this function if you are using multi-function products.

Reminder : For optimum product efficiency, it is important to correctly adjust the water softener (see
page 40). If it is adjusted to H3 or higher, this function cannot be enabled.

To enable or disable this function, before selecting the programme hold down the selection button
until the pilot light switches on or off.

(pilot light on) function enabled;

(pilot light off) function disabled.

Enabling this function cancels the dishwasher salt and rinse aid level display.

• “4/1” SETTING

42

EN

7 / LOADING THE DETERGENT PRODUCTS

Important :

Keep these products out of the reach of children and away from damp (the protective film

on the tablets might be water-soluble).

Only use products specially designed for dishwashers.

Fig. 03 Fig. 04 Fig. 05

To make loading the detergent easier, the distributor is located on the front of the upper basket.
It is compatible with all the products recommended for your dishwasher.

• Powders or liquids (Fig 03)

-- Pull out the dispenser drawer

-- Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirty
crockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that you
add 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the
programmes table.

-- Close the distributor.

• “Multi-purpose ” or Traditional tablets (Fig 04 and 05)

-- Place the tablet in the external compartment

(Fig 04),

or, for optimum operation,

--

pull out the distributor’s drawer and lay the tablet there. (Fig 05).

-- Close the distributor.

• Loading the detergent products. (Fig. 03-04-05)

43

EN

8 /

LOADING THE REGENERATING SALT

EAU

SEL

AA

BB

CC

Fig. 06

Important :

Use special salt for dishwashers. Never use

table salt or cooking salt as this could damage

the appliance

.

Unscrew and remove the compartment

cap.

Fill the compartment with special

dishwasher salt. Use the funnel supplied with

the dishwasher.

Firmly screw the cap back on.

The first time you fill the compartment

with salt, fill it up to the top with water.

• Determining the

regenerating

salt

level :

This pilot light comes on when the salt needs

refilling. After refilling the light may remain on

until the salt has dissolved. This normally

happens after a cycle has been run, or if the

salt fill is not complete.

CC

BB

AA

Important :

If the salt overflows from the dispenser, remove the excess salt crystals to prevent risk of the

tank rusting and run a Soak programme or, failing this, a short programme (see page 48-49) with no

load in the dishwasher.

Firmly screw the compartment cap back on.

•

Loading the regenerating salt

. (Fig. 06)

44

9 /

LOADING THE RINSING PRODUCT

EN

Adjustment lever

Fig. 07

AA

BB

CC

Important :

Use a special dishwasher rinse aid product

to improve drying and prevent filming.

Unscrew and remove the compartment

cap.

Before starting up the dishwasher, fill the

compartment with rinse aid up to the

adjustment lever.

Firmly screw the cap back on.

The default adjustment is 2.

If drying is inefficient or marks are leftthe

glasses (after having run several cycles),

you may increase the dosage by setting the

adjustment to 3 ;

Tip :

Setting the adjustment to 1 reduces rinse aid

consumption and may be sufficient for your

needs.

• Determining the rinse aid product
level :

This pilot light comes on when rinse aid needs

to be added.

CC

BB

AA

Important :

If the rinse aid overflows onto the door on refilling, sponge off the excess to prevent foam

from forming.

•

Loading the rinsing product

. (Fig. 07)

3

2

1

3

2

1

45

EN

10 / YOUR DISHWASHER’S EQUIPMENT

Fig. 09

Fig. 08

Arrange your items so that the water can

circulate freely and spray over all the utensils.

Place large diameter dishes and pans at

the sides.

Do not intersperse, jam together or

superimpose flat plates and concave dishes

(Fig. 08).

The folding spikes make it easier to arrange

your large dishes (Fig. 09) (depending on

the model).

Advice :

When you re-insert the lower basket,

ensure that nothing catches on the upper

basket’s gauge wire to avoid blocking the

rotor.

Unloading your items

First of all empty the lower basket to avoid

drips from the upper basket falling onto the

lower basket.

• THE LOWER BASKET

Very important :

Items not suitable for washing in a dishwasher

- Wooden cutting boards,

- Stainless steel utensils or plastic utensils that are not heat-resistant,

- Copper or pewter items,

- Glued crockery and cutlery,

- Cutlery with wooden, horn or mother-of-pearl handles,

- Antique or hand-painted porcelain.

When purchasing crockery, glasses or cutlery, ensure that it is dishwasher-safe.

Washing capacity : 14 standard place settings

46

EN

Fig. 11

10 / YOUR DISHWASHER’S EQUIPMENT

• THE UPPER BASKET

This basket is particularly designed to take

glasses, cups, ramekins, small salad bowls,

bowls and saucers.

Arrange your items methodically (arranging

glasses, cups or bowls together) to save on

space (Fig. 10).

You can also arrange cups, ladles, etc. on the

folding cup racks.

Advice:

Position the cavities of glasses, cups

or bowls facing downwards.

• Adjusting the height of the upper
basket

For large dishes to be loaded in the lower

basket, the upper basket must be set the to

high position. This can be done with the

basket fully loaded (Fig. 11)

①①

Setting in HIGH POSITION :

Gently raise your basket on each side until it

engages.

②②

Setting in LOW POSITION :

Raise your basket completely on both sides

to unlock it and then lower it to the low

position.

Important :

Check that the two slides are set to the same

height and the basket is horizontal.

Fig. 10

47

EN

10 / YOUR DISHWASHER’S EQUIPMENT

Tip:

Loading the cutlery in the drawers.
For optimum washing and drying, arrange
the cutlery in the drawers as shown in fig.

12.1. Take care not to position it as shown in
fig. 12.2 (items too close together, round
handles not secured in place, items
protruding over the edge of the drawer, etc.)
Bulky items of cutlery should be placed in the
top basket.

• CUTLERY DRAWERS

CLIC

Fig. 13

Your dishwasher is equipped with 2
dividable cutlery drawers.

Pull out the drawers and arrange the cutlery
separately between the dividers (fig 12).

You can arrange the cutlery in the
dishwasher in different ways using the
different divisions.

Fig. 12

Fig. 12.1

Fig. 12.2

•

Removing a cutlery drawer :

You may need to remove one of the cutlery
drawers for tall items to fit, e.g. stemmed wine
glasses.

- Empty the drawer you wish to remove, pull it
out and then push it back in again to around 3
cm.

- Holding the drawer with one hand,
disengage the runner from its hooks, pushing
out the lower rod (fig 13). Repeat this process
for the other runner.

- Push the runners back in, folding them
inwards horizontally until you hear a click.

•

Replacing a cutlery drawer :

- Replace the rods vertically and pull on them.
Fit and clip the hooks in place, first on one
side, then on the other.

Important :

For safety reasons, place long-bladed
knives and other steel cooking utensils in the
cutlery drawer or place them flat in the upper
rack.
Do not wash cutlery with horn handles in the
dishwasher.

48

EN

11 /

WASHING PROGRAMMES

These values refer:

- to normal usage conditions with separated products (detergents, salt, rinsing product).

- only to multifunction product usage conditions

They may vary depending on the load, the water temperature, the softener setting, the presence of rins­ing product and the supply voltage.

• PROGRAMME CHART

drying

MMeeddiiuumm ddiirrttyy

an average amount of

food residue and

grease.

This is the most

eeccoonnoommiiccaall

programme as regards

wwaatteerr

and

eenneerrggyy

saving

hot rinse

Mixed

rinse

wash 45°C

drying

Mixed

IInntteelllliiggeenntt

CCoonnttrrooll

SSyysstteemm ++

AAuuttoommaattiicc

ddeetteeccttiioonn

ooff aammoouunntt

ooff ddiirrtt..

Optimises results,

prioritising

energy saving.

hot rinse

rinse

wash 50-65°C

prewash

85

- 115

14

-16

1,25

- 1,40

118800

1111

00,,9944

TTyyppee ooff ccrroocckkeerryy::

ppoorrcceellaaiinn,, ppaannss,,

ccuuttlleerryy,, ggllaasssseess

eettcc

......

AAmmoouunntt,,

ttyyppee aanndd

ssttaattee ooff ffoooodd

rreessiidduueess..

PPrrooggrraammmmeess

PPrrooggrraammmmee

sseeqquueennccee..

ffoorr gguuiiddaannccee

DDuurraattiioonn ((m

miinn))

WWaatteerr ((ll))

EEnneerrggyy ((kkWWhh))

drying

Resistant

VVeerryy ddiirrttyy

Very dirty dinner plates

and pans, baked-on

stains, grease, frying

residues, hardened
cheese, sauce, etc.

hot rinse

rinse

wash 70°C

hot prewash

120

- 140

14,5

- 16,5

1,7

- 1,8

*

49

EN

11 /

WASHING PROGRAMMES

Mixed

Very short cycle

(no detergent)

to rinse and keep the

dishes wet before

washing the following

day or the day after

cold prewash

Mixed

drying

hot rinse

rinse

wash 60 °C

SShhoorrtt wwaasshh,,

6600 mmiinnuutteess

specially suited
to day-to-day dishes,
ordinary dirt, slightly

dirty

60

14 -

16

1,3 -

1,4

Delicate

VVeerryy sshhoorrtt wwaasshh,,

3300 mmiinnuutteess

specially suited to

ddeelliiccaattee llooaaddss
of day-to-day dishes,
slightly dirty, dirt not

dried on, no excessive

grease.

hot rinse

rinse

wash 45°C

30
11

0,95

15

4,5

0,02

Recommended programme :

**

EN50242

“Off” mode : 0.4 W
"left-on” mode : 0,7 W

Important :

If your dishwasher has a front control panel, in order to prevent the buttons from being

pressed accidentally on opening or moving the door the programming can only be done with the

door closed.

50

EN

12 / PROGRAMMING

FF

Fig. 14

AA

EE

CC

GG

BB

DD

•

Immediate programme start

Choose the desired programme by pressing

either of the buttons.

Programme light will come on.

The display shows the duration of the

program

Validate your choice by pressing button .

The programme will start up.

The time will count down as the programme

advances. The display shows the time

remaining until the end of the programme.

When the programme finishes, the word

will appear on the display

..

Then Switching to

eenneerrggyy ssaavviinnggss

(see page 37).

EE

GG

EE

DD

BB

Programme
length

End of programme

Programme time
remaining (min)

•

Starting up the appliance

Press button , lhe display will light up.

EE

AA

Advice:

Consult the Programmes table on the preceding pages to determine the programme you

need for the type of items, the quantity and the amount of food residue.

51

EN

12 / PROGRAMMING

Time delay
on hold

End of programme

• Delayed programme start

You may choose to delay the start of the wash

programme with this dishwasher :

Choose the programme.

Press button once.

Delay programme start-up by either 1 to 12 hours

by pressing one of the buttons

.

Validate your choice by pressing button .

The indicator " " is on the screen and

count every hour until the start of the program.

When the programme finishes, the word

will appear on the display. Then Switching to

eenneerrggyy ssaavviinnggss

(see page 37).

EE

GG

CC

Programme
length

•

Cancelling a programme

To cancel a programme or if you have made the

wrong selection, hold down button G for a

few seconds until you hear the “cancel” beep.

You can then programme the dishwasher again.

GG

Remarks :

The door’s electrical safety system can cause the indicator lights to illuminate briefly when

the door is opened or closed. This phenomenon does not affect your machine’s operation.

If required, and particularly after the water softener has been reset, the programme may start with

three minutes of resin regeneration. This is a silent operation.

•

Switching off the appliance

When the programme has ended, press

button .

AA

EN

13 / CLEANING YOUR APPLIANCE

Fig. 16

AA

Fig. 15

CC

AA

CC

BB

AA

BB

CC

➀➀

➁➁

③③

④④

⑤⑤

BB

52

The filtration system consists of several

elements:

--

The waste filter.

--

The large main filter.

--

The micro filter.

The filters are located in the centre of the tub

and must be washed regularly to obtain

ooppttiimmuumm wwaasshhiinngg rreessuullttss..

.

• Procedure :

➀➀

Before removing the filters, remove the

waste from the large main filter using a

sponge, to prevent this waste from blocking the

sprinkler arms. Position the sprinkler system as

shown in the diagram (Fig. 15)

➁➁

Turn the waste filter a quarter of a turn

and remove it

.

③③

Remove the main filte .

④④

Remove the microfilter mesh .

⑤⑤

Carefully clean filters

,

and

under the tap. (Fig. 16)

Re-installation :

Proceed in reverse order, inserting filters

and and then

Important :

Remember to lock the waste filter

in place by pushing it in fully and turning it a

quarter turn.

AA

AABB

CC

CCBB

AA

CC

BB

AA

BB

CC

BB

AA

• CLEANING THE WASTE FILTERS

53

EN

13 / CLEANING YOUR APPLIANCE

•

Periodically

Every 3 or 4 months, it is recommended to run the hottest programme, “ ”

(with the dishwasher empty), using a special dishwasher cleaning product available in shops .

Important :

Keep this product out of the reach of children.

•

If the dishwasher is to be out of use for some time

Thoroughly clean the dishwasher then unplug it from the mains and cut off the water supply to it.

Protect the dishwasher from frost

Tip :

Do not use abrasive powder, metal cleaning pads or alcohol or solvent based products.

Use a cloth or sponge.

54

14 / YOUR DISHWASHER’S SAFETY SYSTEMS

EN

•

Door not properly closed

The display flashes if the door is open or not properly closed.

•

Programme access block

While a dishwasher programme is running, the buttons are automatically blocked to prevent them

from being pressed accidentally. The dishwasher will automatically unblock at the end of the

programme or you can cancel by holding down the “START/C” button for 2 seconds.

•

Anti-overflow safety system

This system automatically activates the drain pump if the water level in the tank is exceptionally high.

•

Anti-leak safety system

This system cuts off the water supply if any leakage is detected under the appliance.

•

Total safety

The inlet pipe is equipped with a mechanism that directly cuts off the water supply to the tap in case

of leakage.

•

Error display

The error code appears on the display. See the table on page 55.

Observation :

After rectifying the error, hold down the “Start/C” button for three seconds to unblock

access..

55

EN

15 / IF OPERATING ABNORMALITIES OCCUR

• SUMMARY OF THE FAULTS



for non-display models 

01

d01: water intake fault (tap).

d07: overflow/leak protection fault

07

02

d02: draining fault. d08: sprinkler distribution fault.

08

03

d03: heating fault. d11: sprinkler distribution fault.

11

04

d04: temperature sensor fault.

d12: water level fault (siphoning

through drain tube)

12

05

d05: low pump flow fault. d13: overheating fault.

13

06

d06: high pump flow fault.

d14:

bad drain tube connection or

tap flow insufficient or filters dirty.

14

• BEFORE CALLING FOR SERVICE

Problem Possible Causes What to do?

The door falls heavily when
opened (integratable model)

- Door springs not tensioned
enough to compensate for the
weight of the panel.

- Tighten the two tensioning
screws accessible in the bot­tom section above the front
feet.

The door does not stay horizontal
when open or returns too

quickly

(integratable model)

- Door springs tensioned too
much.

- No wooden panel.

- Loosen the two tensioning
screws accessible in the bot­tom section above the front
feet.

- Fit a temporary wooden panel
on the appliance and adjust
the springs.

The door catches when closing - Appliance not stable

- Door not centred on the tub

- Adjust the feet.

- Re-centre by adjusting the
rear feet.

The upper basket does not stay
in the high position

- Poor manipulation (the basket
is being pulled upwards too
quickly)

- Act more progressively (see
instructions), one side and
then the other.

Small leak around or under the
appliance (move the appliance
to locate the leak)

- Leak from the tap.

- Leak from the appliance.
(Cf. table fault d07).

- Check that a seal is fitted and
retighten the nut.

- Close the water tap and call a
technician.

Small leak at the door

- Appliance not stable or not level

- Door not centred on the tub.

- Adjust the feet.

- Re-centre by adjusting the rear
feet.

Tip:

If one of the above faults occurs and you need to call a repair man, remember to tell him

the message displayed (d01, d02..) as this information will help him.

56

EN

15 / IF OPERATING ABNORMALITIES OCCUR

• RELATING TO PROGRAMMING, DISPLAY

Problem Possible C

auses

What to do ?

The cycle lasts too long - lThe energy-saving program-

mes last longer because the
agitation and drying times are
longer to compensate for the
lower washing and drying tem­peratures

- Use these programmes prefe­rably at night when it is not so
important how long the pro­gramme lasts or when it ends.

The appliance trips the circuit
breaker

- Insufficient amperage to sup­ply all the appliances being
operated simultaneously.

- Internal fault in the appliance.

- Check the socket’s amperage
(10A minimum) and the
meter’s capacity.

- Call a technician.

The appliance does not start - No mains power to the socket.

- Tap closed.

(Cf. table fault d01).

- Selection error or programme
lock.

- Start button pressed too long
(>2”).

-

Appliance in Safety mode (anti­leak).

(Cf. table fault d07).

- Check the socket and the fuse

- Check the tap is open.

- Check the hose line is OK.

- Cancel by holding down Start
for 3” and re-programme.

- Just press Start briefly to start
the programme.

- Call a technician.

• THE INDICATOR LIGHTS

Problem Possible Causes What to do ?

The salt light does not go out - No salt or an insufficient quan-

tity of salt in the tank to trigger
the float.

-

Refill the tank and wait for the
cycle to end. If you have soft
water that requires no salt, the
light is constantly lit.

The lights all light up one after
the other

A light flashes and the
programme does not start

- Wrong programme.

- On some models,

programme
selector wrongly positioned
(between two notches)

- Cancel the current program­ming by holding down the Start
button for 3 seconds and then
re-programme.

- Reposition the selector on a
programme.

57

EN

15 / IF OPERATING ABNORMALITIES OCCUR

Problem Possible C

auses

What to do?

Food traces and deposits in the
glasses

- Items poorly arranged (mas­ked by another larger item or
situated underneath it, items
nested or jammed together).

- Upper spray arm blocked by
cutlery or a dish etc.

- Filter poorly locked and lifting
during washing.

- Micro filter screen clogged.

- One or more holes in the spray
arm blocked.

- Arrange the items properly.
Use the most appropriate
areas and accessories for each
type of item (see instructions).

- Check that the spray arm
rotates freely. Set the basket in
the high position if necessary.

- Check the filter’s facing and that
the filter is locked in place (push
it in fully, turning it to the right)

.

- Remove all the filters and clean
them (in warm water), including
the micro filter’s screen (once
a month).

- Remove the spray arm by turn­ing the lever a quarter of a turn
and clean it under the tap (do
not use any tool that could
damage the holes). Re-install
the spray arm.

Traces of grease - Detergent dose too low; ineffi-

cient detergent; stale product.

- Inappropriate programme
(temperature too low; duration
too short).

-

Increase the dose; try another
detergent.

- Select a programme with a
higher temperature.

• POOR WASHING RESULTS

Problem Possible Causes What to do?

The appliance will not restart - Door opened during a

washing cycle.

- Wait for the time delay to end
(controlled internally by the
appliance).

The appliance does not drain

(Cf. table fault d02).

- The cover has not been remo­ved from the sink’s U-bend.

- Drain hose kinked.

- Filters totally blocked.

- Pump blocked.

- Remove the cover.

- Check the drain hose line
behind the machine is OK.

- Remove and clean the filters
and the drain.

- Initiate a Soaking programme If

the fault persists, call a technician.

The appliance will no longer
function (see table, fault 14).

- installation of non-compliant
drainage system: drainage too low
down or pipe pushed too far in.

- siphoning: the appliance is
emptying as the same time as
it is filling up.

- filter system clogged.

- adhere to the drainage tube
installation dimensions.

- Cleaning the filters.

58

EN

15 / IF OPERATING ABNORMALITIES OCCUR

• POOR WASHING RESULTS...

Problem Possible Causes What to do?

White marks
(identify what type)

- Chalky film (removable with
vinegar).

- Traces of salt (items have a
salty taste).

- Check that there is salt in the
tank (light unlit = OK).

- Check the water hardness at
the tap and that the water sof­tener is set correctly. Adjust it
to a higher level if necessary.

- Water too hard for using a “4­in-1” detergent without the
addition of salt.

- Check that the stopper on the
salt container is closed correctly.

White marks
(identify what type)

- Glass cloudy because water
too soft (cannot be removed).

- Check the water hardness at
the tap and that the water sof­tener is set correctly. Some
detergents in pellet form are
more aggressive to glasses
and decorations (change the
product and use a protective
product if necessary).

Coloured marks (tea, wine, cof­fee)

- Items poorly arranged

- Detergent dose too low; ineffi­cient detergent

- Programme temperature too
low.

- If you use a multifunction

product.

- Turn the cavities in the items
towards the jets.

- Increase the dose; try another
detergent.

- Select a more suitable programme
with a higher temperature.

- Use the “4-in-1” option
(depending on the model).

Streaks or dried droplets on
glasses

- Lack or insufficient amount of
rinsing product.

- Rinsing product out-of-date or

inefficient.

- If you use a multifunction

product.

- Check the indicator light and
fill the tank completely. Adjust
the dispensing unit to a higher
position if necessary.

- Use a recent product (a good
product dilutes easily and
foams in cold water).

- Use the “4-in-1” option
(depending on the model).

Dried-on marks on glasses, dull­ness.

- If you use a multifunction
product.

- Use the “4-in-1” option
(depending on the model).

59

EN

15 / IF OPERATING ABNORMALITIES OCCUR

Problem Possible Causes What to do?

A lot of droplets on the glasses. - Lack or insufficient amount of

rinsing product.

- The dose has not been distrib­uted.

- Positioning of the items.

- Check the indicator light and
fill the tank completely.

- If the tank is not empty after
approximately 60 washings,
call a technician.

- To alleviate the phenomenon,
arrange the items to restrict
water retention as much as
possible. Leave the door ajar
for a few minutes, if possible

Droplets on plastic items, Tefal
coatings, etc.

- These insulating items have a
low calorific mass.

- Arrange them preferably in the
upper basket.

Poorer drying on rapid
programmes

-

On rapid programmes, the drying
temperature and drying period are
reduced to cut down the duration
of the cycle as much as possible.

- Select a rapid programme
carefully or leave the door ajar
for a few minutes.

Condensation on the wall of the
inside door or the tub.

-

Condensation may form on the
walls, particularly after the
appliance has cooled down
(sound insulation increases the
phenomenon)

• POOR DRYING RESULTS

• POOR OPERATION

Problem Possible Causes What to do ?

Constant filling

A lot of waste on the large filter
at the end of the cycle.

- Drain wand fallen on the floor.

- Drain hole situated too low for
the appliance (Cf. table fault
d12).

- The filters and drain outlets are
blocked with too much
residue.

- Check the installation of drain

- Remove and clean the filters
and the bottom of the drain
outlets. Remove large residue
from the plates before putting
them in the machine.

Traces of rust on stainless steel - Quality of the stainless steel

not dishwasher-safe (knives in
particular)

- Use “special dishwasher-safe”
cutlery.

- Check that the stopper on the
salt container is closed correctly.

60

EN

16 / AFTER-SALES SERVICE

Fig. 17

••

INTERVENTION WORK

Any intervention work on your appliance must

be performed by a qualified professional

approved by the manufacturer. When you call,

please mention the full reference for your

appliance (model, type and serial number).

This information is shown on the description

plate (see Fig. 17)

ORIGINAL PARTS

When maintenance is being carried out, ask

for only certified original spare parts to be

used.

61

EN62EN

17 / INDICATIONS FOR THE TESTING LABORATORIES

•

Details common to all models

— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 standard place settings

— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Figs. A-B-C; see above and next page

— Loading as per the indications on next page, with one side shelves

— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position

— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - - 3

— Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8 - 2.5 mmol/l

(See § 5 “adjusting the water softener” for details).

For detailed information on the comparison tests regarding the level of soiling, the types of

crockery and cutlery, etc., contact the equipment manufacturer before commencing the tests.

•

Tests to Standard EN 50242

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - see Programmes table

— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35 g of detergent B

•

Tests according to the mixed IEC 436/DIN 44990 method

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - see Programmes table

— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 + 30 g of detergent C

NB:

When conducting tests using a multi-function tablet: Setting for hardness < 2.5 mmol/l

(See § 5 for details)

— Check that the water softener is correctly set for the water hardness

— Pull out the detergent distribution drawer and place the tablet in the interior compartment.

•

Built in or full built in model: Measuring the noise level in accordance with

Standard EN60704-2-3

— Align the plinth on the housing unit with the door panel.

63

EN

17 / INDICATIONS FOR THE TESTING LABORATORIES

B

C

➀➀ ➁➁ ➂➂ ➃➃ ➄➄ ➅➅ ➆➆ ➇➇

A

14 x

➇➇

14 x

②②

2 x

➅➅

➄➄

➆➆

14 X

➃➃

14 X

➂➂

s s

m mm m e s s

eeeeesss

mmmeeeee e e

s

e

s

m

14 X

➀➀

: egg/oeuf : meat/viande : spinach/épinards

sme

FagorBrandt SAS, locataire-gérant – SAS au capital social de 20 000 000 euros RCS Nanterre 440 303 196.

DW3M00284_00 - 1/6 - 02/12

PPhhoottooggrraapphhiiee ddee ccoouuvveerrttuurree//ffrroonntt ccoovveerr pphhoottooggrraapphhyy:: MMiicchheell GGiibbeerrtt

DVF1280,-