Page 1
FR Prescriptions de montage et mode d’emploi
CS Návod na montáž a používání
DA Bruger- og monteringsvejledning
DE Montage- und Gebrauchsanweisung
EL ȆǼǿĬȀǽȉ ȉȋȄǺȈȃȆȂȆĬǿȉǿȉ ȁǺȀ ȌȈǿȉǿȉ
EN Instruction on mounting and use
ES Montaje y modo de empleo
HU Felszerelési és használati utasítás
IT Istruzioni di montaggio e d'uso
NL Montagevoorschriften en gebruiksaanwijzingen
PL Instrukcja montaīu i obsâugi
PT Instruções para montagem e utilização
SK Návod k montáži a užití
SV Monterings- och bruksanvisningar
Hotte aspirante
Digestoĝ
Emhætte
Dunstabzugshaube
ǺʍȡȢȡĴșijȓȢįȣ
Cooker Hood
Campana extractora
Konyhai páraelszívó
Cappa aspirante
Afzuigkap
Okap kuchenny
Exaustor
Odsávaÿ pary
Köksfläkt
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Dear Customer,
You have just acquired a DE DIETRICH hood, and we would like to thank you.
Our research teams have created this new generation of appliances for you. Their quality, design, features and technological
advances make them exceptional products, and reveal our unique know-how.
Your new DE DIETRICH hood will blend harmoniously into your kitchen and will perfectly combine extraction performance and ease
of use. We wanted to offer you a product of excellence.
In the DE DIETRICH product range, you will also find a wide choice of hobs, ovens, microwaves, dishwashers, cookers, fridges,
freezers, that you can coordinate with your new DE DIETRICH hood.
Visit our website www.dedietrich-electromenager.com
complementary information.
, where you will find our latest innovations as well as useful and
DE DIETRICH
Setting New Values
As part of our commitment to constantly improving our products, we reserve the right to make changes to them based on technical
advances to their technical and functional features and appearance.
Warning : Before installing and using your appliance, please carefully read this Guide to Installation and Use, which
will allow you to quickly familiarise yourself with its operation.
Contents
EN - Instruction on mounting and use...................................................................... 41
Use................................................................................................................................ 41
Description of the hood.............................................................................................. 41
Caution......................................................................................................................... 41
Installation ................................................................................................................... 41
Electrical connection ..................................................................................................................................42
Mounting.....................................................................................................................................................42
Operation ..................................................................................................................... 43
Maintenance ................................................................................................................ 43
Cleaning .....................................................................................................................................................43
Grease filter................................................................................................................................................43
Charcoal filter (filter version only)...............................................................................................................44
Replacing lamps.........................................................................................................................................44
Troubleshooting.......................................................................................................... 44
After-sales service ...................................................................................................... 44
40
Page 8
EN - Instruction on mounting and use
Consult the designs in the front pages referenced in the text
by alphabet letters.
Closely follow the instructions set out in this manual. All
responsibility, for any eventual inconveniences, damages or
fires caused by not complying with the instructions in this
manual, is declined.
Note: the elements marked with the symbol “(*)” are optional
accessories supplied only with some models or elements to
purchase, not supplied.
Use
The hood is conceived for the suction of cooking fumes and
steam and is destined only for domestic use.
The hood is designed to be used either for exhausting or filter
version.
Ducting version
The hood is equipped with a top air outlet B for discharge of
fumes to the outside (exhaust pipe and pipe fixing clamps not
provided). Fig. 6
Attention!
If the hood is supplied with carbon filter, then it must be
removed.
Filter version
Should it not be possible to discharge cooking fumes and
vapour to the outside, the hood can be used in the filter
version, fitting an activated carbon filter and the deflector F
on the support (bracket) G, fumes and vapours are recycled
through the top grille H by means of an exhaust pipe
connected to the top air outlet B and the connection ring
mounted on the deflector F (exhaust pipe and pipe fixing
clamps not provided). Fig. 6-7
Attention!
If the hood is not supplied with carbon filter, then it must
be ordered and mounted.
Description of the hood Fig. 1
1. Control panel
2. Grease filter
3. Grease filter release handle
4. Halogen lamp
5. Telescopic chimney
6. Air outlet (used for filter version only)
Caution
Keep this use manual with your apparatus. If the apparatus
has to be sold or ceded to someone else, make sure that this
manual is also sent.
Read this manual carefully before installing or using your
apparatus because it contains important information for your
safety and for whoever installs or uses it.
This apparatus has been created to be installed in a kitchen
and for normal domestic use.
Do not use it for commercial or industrial purposes or other
purposes for which it was not created.
Do not modify or try to modify the characteristics of this
apparatus. It would be dangerous for you.
Using over a fuel (wood, carbon) cooking top is not
authorised.
If the filtering hood is installed in a kitchen heated by an
apparatus connected to a fireplace (e.g. a stove), the filtering
version of the hood must be installed. Do not use the hood
without fat filters.
Do not use steam or pressure cleaning equipment on your
apparatus (for reasons of electrical safety).
WARNING! Do not connect the appliance to the mains until
the installation is fully complete.
Before any cleaning or maintenance operation, disconnect the
hood from the mains by removing the plug or disconnecting
the home mains switch.
The appliance is not intended for use by children or persons
with impaired physical, sensorial or mental faculties, or if
lacking in experience or know-how, unless they are under
supervision or have been trained in the use of the appliance
by a person responsible for their safety.
Children should be monitored to ensure that they do not play
with the appliance.
Never use the hood without effectively mounted grating.!
The hood must NEVER be used as a support surface unless
specifically indicated.
The premises must be sufficiently ventilated, when the kitchen
hood is used together with other gas combustion devices or
other fuels.
The suctioned air must not be conveyed into a conduit used
for the disposal of the fumes generated by appliances that
combust gases or other fuels.
The flaming of foods beneath the hood itself is severely
prohibited.
The use of exposed flames is detrimental to the filters and
may cause a fire risk, and must therefore be avoided in all
circumstances.
Any frying must be done with care in order to make sure that
the oil does not overheat and burst into flames.
As regards the technical and safety measures to be adopted
for fume discharging it is important to closely follow the
relations provided by the competent authorities.
The hood must be regularly cleaned on both the inside and
outside (AT LEAST ONCE A MONTH, it is in any event
necessary to proceed in accordance with the maintenance
instructions provided in this manual)..
Failure to follow the instructions as concerns hood and filter
cleaning will lead to the risk of fires.
Do not use or leave the hood without the lamp correctly
mounted because of the possible risk of electric shocks.
We decline any responsibility for any problems, damage or
fires caused to the appliance as the result of the nonobservance of the instructions included in this manual.
Installation
The minimum distance between the supporting surface for the
cooking vessels on the hob and the lowest part of the range
hood must be not less than 50cm from electric cookers and
41
Page 9
65cm from gas or mixed cookers.
If the instructions for installation for the gas hob specify a
greater distance, this must be adhered to.
Electrical connection
The mains power supply must correspond to the rating
indicated on the plate situated inside the hood. If provided with
a plug connect the hood to a socket in compliance with current
regulations and positioned in an accessible area. If it not fitted
with a plug (direct mains connection) or if the plug is not
located in an accessible area apply a bi-polar switch in
accordance with standards which assures the complete
disconnection of the mains under conditions relating to overcurrent category III, in accordance with installation
instructions.
Warning: Before re-connecting the hood circuit to the mains
supply and checking the efficient function, always check that
the mains cable is correctly assembled.
Mounting Fig. 5-6-7
Before beginning installation:
• Check that the product purchased is of a suitable size for
the chosen installation area.
• To facilitate installation, remove the fat filters and the
other parts allowed and described here, dismantle and
mount it.
To remove see also the relative paragraphs.
• Remove the active carbon (*) filter/s if supplied (see also
relative paragraph). This/these is/are to be mounted only
if you want lo use the hood in the filtering version.
• Check (for transport reasons) that there is no other
supplied material inside the hood (e.g. packets with
screws (*), guarantees (*), etc.), eventually removing
them and keeping them.
• If possible, disconnect and move freestanding or slide-in
range from cabinet opening to provide easier access to
rear wall/ceiling. Otherwise put a thick, protective
covering over countertop, cooktop or range to protect
from damage and debris. Select a flat surface for
assembling the unit. Cover that surface with a protective
covering and place all canopy hood parts and hardware
in it.
• Disconnect the hood during electrical connection, by
turning the home mains switch off.
• In addition check whether near the installation area of the
hood (in the area accessible also with the hood mounted)
an electric socket is available and it is possible to
connect a fumes discharge device to the outside (only
suction version).
• Carry out all the masonry work necessary (e.g.
installation of an electric socket and/or a hole for the
passage of the discharge tube).
Expansion wall plugs are provided to secure the hood to most
types of walls/ceilings. However, a qualified technician must
verify suitability of the materials in accordance with the type of
wall/ceiling. The wall/ceiling must be strong enough to take
the weight of the hood. Do not tile, grout or silicone this
appliance to the wall. Surface mounting only.
Attention! The chimney is predisposed for installation of
the filter Version.
In certain models where it is required to use the cooker hood
in the suction version then it is possible to overturn the upper
section of the chimney
and insert it inside the lower section of the chimney so that the
air-exit perforations are not visible.
The chimneys in which this operation is possible are
recognizable by their bracket fixing points G which are
repeated also in the lower side of the upper section of the
chimney.
1. Using a pencil, draw a line on the wall, extending up to
the ceiling, to mark the centre. This will facilitate
installation.
2. Rest the drilling template against the wall: the vertical
centre line printed on the drilling template must
correspond to the centre line drawn on the wall, and the
bottom edge of the drilling template must correspond to
the bottom edge of the hood.
3. Rest the support bracket on the drilling template so that it
coincides with the dotted rectangle, mark the two outer
holes and drill them (mark and also carry out upper drill
holes - 3a), remove the drilling template, insert 4 wall
plugs and fix the hood support bracket into place using
two 5x45mm screws.
4. Hang the hood on the bracket.
5. Adjust the distance of the hood from the wall.
6. Adjust the horizontal position of the hood.
7. Remove the carbon filter frame (see also Fig. 3); mark
the drill hole, using a pencil, for fastening the hood to the
wall.
8. Remove the hood from the bracket.
9. Drill at the point marked (Ø8mm - see operation 7).
Insert 1 wall plug.
10. Rest the chimney support bracket „G“ against the wall,
touching the ceiling. Use the support bracket as a drilling
template (the small slot formed on the support must
coincide with the line drawn on the wall as above –
operation 1) and mark 2 holes with a pencil, dril the holes
(Ø8mm), insert 2 wall plugs. Fix the chimney support
bracket to the wall using two 5x45mm screws.
11. Fix the bracket Z with two screws, so that the bracket
blocks the lower section of the telescopic chimney
(external covering) to the wall.
12. Connect a pipe (pipe and pipe clamps not provided, to be
purchased separately) for discharge of fumes to the
connection ring located over the suction motor unit.
Insert the flue.
13.
14. Hook the hood onto the bottom bracket.
15. Fasten the hood to the wall with 1 5x45 mm screw
(ABSOLUTELY NECESSARY), remount the carbon filter
frame (see also Fig. 3).
16. Connect the tube to a fume expulsion device toward the
exterior in the case you want to use the hood in a filtering
version, then fix deflector F to the support flues bracket G
and connect the end of the tube to the connection ring
on deflector F.
17. Make the electrical connections.
42
Page 10
18. Fix the flue to the hood support bracket with two screws.
Install the supplied “non-return fumes” valve on the discharge
outlet (joint fixed) and remove the adhesive tape that is
temporarily blocking the valve.
If installing a suction version, the installation of a “non-return
fumes Valve” prevents the return of fumes or air from outside.
Attention! Before fixing a tube to the discharge outlet, check
that the “non-return fumes Valve” opens and closes correctly.
Operation
To select the functions of the hood just touch the commands.
- Light key ON/OFF
- Pressing the key for 3" the lamps remain turned
off and the luminous glass band emits a "BLUE"
light.
- Motor key OFF / 1st speed.
Hood OFF luminous glass band off.
Speed 1 luminous glass band "BLUE".
- Enabling/disenabling carbon filter alarm.
To enable the alarm, switch the hood OFF and press
the key for 3”, the luminous band will emit a
sequence of three “AMBER” flashes.
To disenable the alarm, switch the hood OFF and
press the key for 3”, the luminous band will emit a
sequence of 3 "BLUE" flashes.
- Reset carbon filter alarm.
Saturation of the carbon filter will be signalled after
160 hours of use. The luminous band flashes
“AMBER”.
Press the key for 3” to reset the signal.
Once reset the hood switches off.
- Decreasing speed
The key decreases the speed (suction power) of the
intensity of speed 1.
Intensive luminous glass band flashing “REDAMBER” alternatively.
Intensive speed (suction power) lasts 5’ after which
the motor passes to speed 3.
The function can be interrupted pressing the "-" key,
the motor passes to speed 3.
Speed 3 luminous glass band "RED".
Speed 2 luminous glass band "AMBER".
Speed 1 luminous glass band "BLUE".
- Timing speed 1.
Press the key for at lest 2” to activate the timing of
speed 1.
The hood will function at speed 1 for 10’.
After 10' the hood will pass to the OFF position.
Timed Speed 1 luminous glass band flashes
"BLUE".
Pressing the motor/speed 1 OFF key or the
"+" key, the timed speed can be
interrupted, passing respectively to the
OFF state or speed 2.
- Increasing speed
The key increases the speed (suction power) from
speed 1 to intensive.
Speed 1 luminous glass band "BLUE".
Speed 2 luminous glass band "AMBER".
Speed 3 luminous glass band "RED".
Intensive luminous glass band flashing "RED-
AMBER" alternatively. .
Intensive speed (suction power) lasts 5’ after which
the motor passes to speed 3.
The function can be interrupted pressing the "-" key,
the motor passes to speed 3.
- Timing Speed 1.
Press the key for at lest 2” to activate the timing of
speed 1.
The hood will function at speed 1 for 10’.
After 10' the hood will pass to the OFF position.
Timed Speed 1 luminous glass band flashes
"BLUE".
Pressing the motor/speed 1 OFF key or the
"+" key, the timed speed can be
interrupted, passing respectively to the
OFF state or speed 2.
If the hood fails to operate correctly, briefly disconnect it
from the mains power supply for almost 5 sec. by pulling
out the plug. Then plug it in again and try once more
before contacting the Technical Assistance Service.
Maintenance
ATTENTION! Before performing any maintenance operation,
isolate the hood from the electrical supply by switching off at
the connector and removing the connector fuse.
Or if the appliance has been connected through a plug and
socket, then the plug must be removed from the socket.
Cleaning
The cooker hood should be cleaned regularly (at least with the
same frequency with which you carry out maintenance of the
fat filters) internally and externally. Clean using the cloth
dampened with neutral liquid detergent. Do not use abrasive
products. DO NOT USE ALCOHOL!
Warning:
Failure to carry out the basic cleaning recommendations of the
cooker hood and replacement of the filters may cause fire
risks.
Therefore, we recommend oserving these instructions.
The manufacturer declines all responsibility for any damage to
the motor or any fire damage linked to inappropriate
maintenance or failure to observe the above safety
recommendations.
Grease filter Fig. 2
This must be cleaned once a month (or when the filter
saturation indication system – if envisaged on the model in
possession – indicates this necessity) using non aggressive
detergents, either by hand or in the dishwasher, which must
be set to a low temperature and a short cycle.
When washed in a dishwasher, the grease filter may discolour
43
Page 11
slightly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle.
Charcoal filter (filter version only) Fig. 3
It absorbs unpleasant odours caused by cooking.
The charcoal filter can be washed once every two months (or
when the filter saturation indication system – if envisaged on
the model in possession – indicates this necessity) using hot
water and a suitable detergent, or in a dishwasher at 65°C (if
the dishwasher is used, select the full cycle function and leave
dishes out).
Eliminate excess water without damaging the filter, then put it
in the oven for 10 minutes at 100° C to dry completely.
Replace the mattress every 3 years and when the cloth is
damaged.
Remove the filter holder frame by turning the knobs (g) 90°
that affix the chimney to the cooker hood.
Insert the pad (i) of activated carbon into the frame (h) and fit
the whole back into its housing (j).
CLEANING AND UPKEEP OF YOUR APPLIANCE
To keep your appliance in good working order, we
recommend that you use Clearit household products.
Professional expertise for the
general public
Clearit offers you professional products and adapted solutions
for the daily upkeep of your household and kitchen
appliances.
You may find them in conventional retail outlets, along with a
complete line of by-products and consumables.
Replacing lamps Fig. 4
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are
cooled down.
1. Using a flat head screwdriver or equivalent tool, carefully
pry loose the light cover.
2. Remove the damaged light and replace with a new 12
Volt, 20 Watt (Maximum) halogen light made for a G-4
base SUITABLE FOR USE IN OPEN LUMINAIRES.
Follow package directions and do not touch new light
with bare hands.
3. Reinstall the light cover. (it will snap shut).
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
The symbol
accompanying the product, indicates that this appliance may
not be treated as household waste. Instead it should be taken
to the appropriate collection point for the recycling of electrical
and electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for waste
disposal.
For more detailed information about treatment, recovery and
recycling of this product, please contact your local council,
your household waste disposal service or the shop where you
purchased the product.
on the product, or on the documents
Troubleshooting
SYMPTOMS SOLUTIONS
The hood is not working... Ensure that:
• The power is not cut off.
• A speed has been selected.
The hood is not operating
effectively...
The hood stopped working Ensure that:
Ensure that:
• The selected motor speed is
sufficient for the quantity of
smoke and vapours to be
cleared.
• The kitchen is sufficiently
ventilated to allow for fresh air
intake.
• The carbon filter is not worn
(hood operating in recycling
mode).
• The power is not cut off.
• The single-pole cut-off device
was not activated.
After-sales service
Any maintenance on your equipment should be undertaken
by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for
the brand appliances.
When making an appointment, state the full reference of your
equipment (model, type and serialnumber).
This information appears on the manufacturer's nameplate
attached to your equipment.
This appliance is marked according to the European directive
2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
44
Loading...