FR GUIDE D’UTILISATION
EN GUIDE TO INSTALLATION
CS N¡VOD NA INSTALACI A POUéITÕ
DA INSTALLATIONS- OG BRUGSVEJLEDNING
DE BETRIEBSANLEITUNG
Hotte de cuisine
Cooker hood
KuchyÚsk· digesto¯
Emhætte til køkken
Dunstabzugshaube
FR 03
Dear Customer,
EN 18
CS 33
DA 48
DE 63
As part of our commitment to constantly improving our products, we reserve the right to
make changes to them based on technical advances to their technical and functional features
and appearance.
You have just acquired a DE DIETRICH hood, and we would like to thank
you.
Our research teams have created this new generation of appliances for
you. Their quality, design, features and technological advances make
them exceptional products, and reveal our unique know-how.
Your new DE DIETRICH hood will blend harmoniously into your kitchen
and will perfectly combine extraction performance and ease of use. We
wanted to offer you a product of excellence.
In the DE DIETRICH product range, you will also find a wide choice of
hobs, ovens, microwaves, dishwashers, cookers, fridges, freezers, that
you can coordinate with your new DE DIETRICH hood.
Visit our website www.dedietrich-electromenager.com, where you will
find our latest innovations as well as useful and complementary information.
DE DIETRICH
Setting New Values
Warning: Before installing and using your appliance, please carefully
read this Guide to Installation and Use, which will allow you to quickly
familiarise yourself with its operation.
18
b_255
TABLE OF CONTENTS
1 / NOTICES TO THE USER
• Safety recommendations _________________________________ 20
• Environmental protection ____________________________________ 21
• For Australia only (Legal instruction) ___________________________ 21
• Description of your appliance _________________________________ 2 2
2 / INSTALLING YOUR APPLIANCE
• Using the evacuation mode _______________________________ 23
• Using the recycling mode _________________________________ 23
• Electrical connections ____________________________________ 24
• Assembling the hood ____________________________________ 25
• Ducting mode ___________________________________ 26
• Filtering mode __________________________________ 27
3 / USING YOUR APPLIANCE
• Description of the control panel ____________________________ 28
4 / CARING FOR AND CLEANING YOUR APPLIANCE
• Cleaning the grease filter _________________________________ 2 9
• Changing the charcoal filter _______________________________ 29
• Cleaning and caring of the casing __________________________ 3 0
• Changing the light bulb __________________________________ 30
• Maintaining your appliance _______________________________ 31
EN
5 / TROUBLESHOOTING _______________________________________ 32
6 / AFTER SALES SERVICE ____________________________________ 32
b_255
19
EN
1 / NOTICES TO THE USER
Attention
Keep this user guide with your appliance. If
the appliance is ever sold or transferred to
another person, ensure that the new owner
receives the user guide. Please become
familiar with these recommendations before
installing and using your oven. They were
written for your safety and the safety of
others.
SAFETY RECOMMENDATIONS
•
- This oven was designed for use by private
persons in their homes.
- This appliance is to be used by adults.
Make sure that children do not touch and that
they do not treat it as a toy. Make sure that they
do not touch the appliance's control panel.
- When you receive the appliance, unpack or have
it unpacked immediately. Give it an over-all general
inspection. Make note of any concerns or
reservations on the delivery slip and make sure
to keep a copy of this form.
- Your appliance is intended for standard household
use. Do not use it for commercial or industrial
purposes or for any other purpose than that for
which it was designed.
- Do not modify or attempt to modify any of the
characteristics of this appliance. This would be
dangerous to your safety.
- Repairs must only be carried out by an approved
specialist.
- Always unplug the hood before cleaning it or
performing other maintenance acts.
- Provide adequate ventilation for the room in the
case of simultaneous use of the hood and other
appliances powered by an energy source other
than electricity. This will prevent the hood from
aspirating the combustion gases.
- You should never "flambé" dishes under the hood
or operate gas rings under the hood without
placing cookware on them (the flames sucked
up into the hood can damage the appliance).
- When frying food under the appliance, you must
carefully monitor the preparation at all times.
Oils and grease brought to very high
temperatures can catch fire.
- Respect the recommended frequency of
cleanings and filter replacements. The
accumulation of grease deposits may cause a
fire.
- The hood should never be used over a
combustible fuel burning stove (wood, coal, etc.).
- Never use steam or high-pressure devices to
clean your appliance (requirement imposed by
electrical safety).
- With a view to constantly improving our products,
we reserve the right to modify their technical,
functional or aesthetic characteristics, making any
changes to their features considered necessary
or desirable in view of technical progress.
- In order to easily locate the reference information
for your appliance, we recommend that you note
these data on the "After-Sales Service Department
and Customer Relations" page.
(This page also explains to you where to find this
information on your appliance.)
Warning
In the case of a kitchen heated by a
device connected to a chimney (a stove, for
example) the "filtering" version of the hood
should be installed. Do not use the hood
without grease filters.
Suitable ventilation should be provided in
the room when the hood is used at the same
time as appliances operated by gas or another
combustible fuel.
20
b_255
1 / NOTICES TO THE USER
• ENVIRONMENTAL PROTECTION
- This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping
it off in the municipal receptacles provided for this purpose.
- Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate
the used appliances that should not be mixed with other waste.
This way, the appliance recycling organised by your manufacturer will be done under the best
possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment. Contact your town hall or your retailer for the used appliance
collection points closest to your home.
- We thank you doing your part to protect the environment.
Warning
Installation should only be performed by installers and qualified technicians
Warning
Remove the protective film from the grease filter before use.
• FOR AUSTRALIA ONLY (Legal instruction)
EN
Young children should be supervised to ensure that they do not play with the appliance.
The appliance is not intended for use by young children or infirm person without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid hazard.
WARNING : Ensure the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
For service issues, telephone number: 1300
Do not install the product if you see any damage on it.
b_255
21
1 / NOTICES TO THE USEREN
• DESCRIPTION OF YOUR APPLIANCE
A
B
Telescopic Tubes
A
(accessory)
22
B
Metallic Grill
b_255
2 / INSTALLING YOUR APPLIANCE
EN
- The appliance must be unplugged during installation or when any repairs or maintenance work is being
performed.
- Ensure that the network voltage corresponds to the voltage noted on the identification plate located
inside the hood.
- If the electrical installation at your residence requires any changes in order to hook up your Appliance,
call upon a professional electrician.
- If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas exhaust
duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system.
- Under no circumstances should the exhaust duct empty into the attic.
- Install the hood at safe distance of at least 35 cm from an cooking hob.
This appliance can be installed in either duction version or filtering version.
The appliance is supplied in the filtering version, the charcoal filters are installed (Ref.AH4010E1).
• USING THE DUCTING MODE
If you posses an outlet to the exterior
(fig. 1)
Your hood can be connected to this outlet using a flue (minimum
Ø 125mm that is enamelled, in aluminium, flexible or made of
inflammable material).
To cover the evacuation tube, a decorative telescopic tube
is available (ask your retailer)
REF. n°:
RHD91X (inox)
RHD91Z (aluminium colour).
Your cooker hood is a filtering version. All you need to do is to
remove the charcoal filter first.
• USING THE FILTERING MODE
If you do not posses an oulet to the exterior
(fig. 2)
All of our appliances can be used in recycling mode.
The air and steam taken up by the unit are purified with charcoal
filter and returned to the environment.
b_255
23
fig. 1
fig. 2
Ø 150
Ø 125
EN
• ELECTRICAL CONNECTIONS
During installation and maintenance operations,
the appliance must be unplugged from the
electrical grid; fuses must be cut off or removed.
The electrical connections are made before the
appliance is installed in its housing.
Ensure that
- the electrical installation has sufficient voltage,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
2 / INSTALLING YOUR APPLIANCE
installation requirements.
Warning
This appliance must be grounded.
We cannot be held responsible for any
accident resulting from an inexistent,
defective or incorrect ground lead.
In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has
not got any other device ensuring omnipolar
disconnection from the electricity main, with a
contact opening distance of at least 3mm, such
separating device ensuring disconnection from
the main must be included in the fixed installation.
This appliance is delivered with a H05VVF power
cord that has three-0.75mm2 conductors (neutral,
phase and ground). It must be connected to the
main power supply (which should be a 230-240V
single phase current) via a CEI60083
standardised socket that should remain
accessible after installation, in keeping with
installation guidelines.
If the power cable is damaged, call the after-sales
service department in order to avoid danger.
Warning
If the electrical installation at your
residence requires any changes in order to
hook up your appliance, call upon a
professional electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse
corresponding to the electrical socket where
your appliance is plugged in.
24
b_255
2 / INSTALLING YOUR APPLIANCE
EN
• ASSEMBLING THE HOOD
Warning
The hood must be installed in
compliance with all applicable regulations
concerning the ventilation of premises. In
France these regulations are described in
DTU 61.1 from the CSTB. In particular, the
evacuated air should never be conveyed to
a duct used to evacuate smoke from
appliances that use gas or other
combustible fuels. Unused ducts may only
be used after approval from a competent
specialist.
The distance between the supporting surface for the
cooking vessels on the hob and the lower part of the
hood must be at least 35 cm. If the instructions for
installation for the hob specify a greater distance, this
has to be taken into account.
- Opening the back panels:
when installing, it will be necessary to open the
back panels:
to open them, grip them by the lower part and
turn them outwards as far as they can go (Fig.3);
release gently until they lock.
- Fixing to the wall: Draw a line on the wall in
vertical line with your hob. Mark the first 4 holes to
be drilled in the wall, respecting the distances
indicated in Fig. 4. Drill the 4 holes and fit the screw
anchors provided. Fix the metal brackets (A) to
the wall using the holes just drilled (Fig. 5); the
screws for fixing the bracket are provided.
Hang the hood on the brackets (Fig. 6). Adjust the
horizontal position moving the hood to the right or left
so that it is aligned with the wall units. When adjustment
has been completed, without removing the hood,
mark the other 2 holes to be drilled (C) in the wall.
Remove the hood and drill the holes marked (8 mm
diameter). Then use the 2 screw anchors and the 2
screws provided for final fixing.
695
55
ø8
b_255
min 870
fig. 3
fig. 4
A
fig. 5
fig. 6
25
EN
2 / INSTALLING YOUR APPLIANCE
• Ducting mode
- Assembly of the flange: install the flange in the
device air outlet and press slightly (Fig.7).
- Fixing of the telescopic decorative flue (on
request)
- Adjust the width of the support bracket (D) of the
telescopic flue by means of the screws (E) as
shown in Fig.8; then, by means of the screw anchors
and screws (F) provided, fix the bracket to the
ceiling in such a way that it is positioned along the
axis with your hood.
- Connect the air outlet pipe to the air vent of the
hood. Use a flexible pipe and lock it to the air vent
of the hood with a metal hose clamp - Fig. 13 (pipe
and clamp are not provided).
- Carry out the electrical connection of the hood
using the power supply cable.
- Insert the extension flues setting them on the
hood; extend the upper flue to the ceiling and
secure with the 2 screws (H) - Fig.10.
Warning
This is the filtering version of your
cooker hood; you must first remove the
charcoal filter.
Tip
For optimal use of your appliance, we
recommend that you connect the hood to a
150 mm-diameter flue (not delivered with the
appliance). Minimise the number of angles
and bends and the lengths of the flue. In
the event that the hood will be operated
using out-door evacuation, you should
ensure a sufficient inflow of fresh air to
avoid a pressure deficiency in the room.
E
F
=
D
F
fig. 7
fig. 9
26
=
fig. 8
H
H
fig. 10
b_255
2 / INSTALLING YOUR APPLIANCE
• Filtering mode
- Mount the metallic grill, fixing it with 2 screws
within the hood (fig. 11).
- Make the electrical connection of the hood by
means of the power supply cable.
EN
fig. 11
b_255
27
EN
3 / USING YOUR APPLIANCE
• DESCRIPTION OF CONTROL PANEL
A) LIGHTS on/off switch.
1) Activates the motor at the first
speed (the icon lights-up). By
pressing on the icon for about 2
seconds the motor will stop.
2) Activates the motor at the second
speed (the icon lights-up). All of
the other icons relative to the
speed remain switched off.
3) Activates the motor at the third
speed (the icon lights-up). All of
the other icons relative to the
speed remain switched off.
4) Activates the motor at the fourth speed (the icon lights-up). All of the other icons relative to the speed remain switched
off.
B) Activates the TIMER (the icon lights-up). By activating the Timer (5 minutes), the motor will stop automatically after
5 minutes.
C) FILTER ALARM. After 30 working hours, the icon lights up to indicate that the grease filter/s must be cleaned.
After 120 working hours, the icon flashes to indicate that the grease filter/s must be cleaned and the charcoal filters
replaced.
To re-start the hour - counter, reset by pressing on the icon while it is lit (or while it flashes).
fig.12
Tip
This guide to installation and use is valid for several models. Minor differences in details
and fittings may emerge between your appliance and the descriptions provided.
28
b_255
4 / CARING FOR AND CLEANING YOUR APPLIANCE
Warning
Always unplug the hood before cleaning it or performing other maintenance acts.
Regular maintenance of your appliance is a guarantee of proper functioning, good performance and durability.
Warning
Failure to respect the guidelines for cleaning the appliance and filters may cause fires.
Please carefully adhere to the maintenance recommendations.
•
CLEANING THE GREASE FILTER
Pay special attention to the grease filter, that must
be cleaned at regular intervals.
Filter cleaning frequency:
The grease filter must be cleaned about every
30 hours of operation (when the “C” icon on the
control panel lights up or flashes) Once the clean
filter has been fitted, press the “C” icon while it is
lit (or while it flashes) to restart the hour counter.
Wash the filters with a commercial household
cleanser, then rinse fully and dry. They may be
cleaned in a dishwasher making sure that the filter
does not come into contact with dirty dishes or
silver tableware.
EN
• Removing the grease filter (fig.13)
Open the front panel, gripping it by the lower part and
turn it outwards to the end of its travel then gently
release it until it locks. Remove the grease filter by
pushing the catch and turning it outwards.
CHANGING THE CHARCOAL FILTER
•
If the hood is used in the filtering version, the charcoal
filter will periodically have to be replaced.
Frequency of filter replacement:
The charcoal filter must be replaced about every
120 hours of operation (when the “C” icon on the
control panel flashes) Once the new filter has been
fitted, press the “C” icon while it flashes to restart
the hour counter.
b_255
fig.13
29
EN
4 / CARING FOR AND CLEANING YOUR APPLIANCE
• Replacing the charcoal filter (Fig.14)
Open the front panel, gripping it by the lower part and
turn it outwards to the end of its trave then gently
release it until it locks.
Remove the grease filter by pushing the catch and
turning it outwards (Fig.13).
Remove the charcoal filters with a rotating
movement, in a clockwise direction (fig. 14).
Charcoal filter ref. no. AH4010E1
• CLEANING AND CARING OF THE
CASING
Avoid products containing abrasives when cleaning
the casing.
Condensate can appear on inox panel covering
grease filter. Please clean regularly
• CHANGING THE LIGHT BULB
fig.14
Warning
Before carrying out any work, the power
supply to the hood must be turned off,
either by unplugging it or by using the
circuit breaker switch.
To change the halogen bulbs open the cover levering
from the proper slots (Fig. 15). Replace with bulbs
of the same type.
CAUTION: Do not handle glass bulb with bare
hands.
30
fig.15
b_255
4 / CARING FOR AND CLEANING YOUR APPLIANCE
Warning
Before carrying out any work, the power supply to the hood must be turned off, either by
unplugging it or by using the circuit breaker switch.
MAINTAINING YOUR APPLIANCE
•
EN
MAINTENANCE... WHAT TO DO ?
Never use metal scouring pads,
abrasive products or excessively
Top surface and
accessoires
Grease filter
Charcoal filter
stiff brushes.
This filter traps fatty vapours and
dust. This component plays an
important role in ensuring the
effectiveness of your hood. In the
event of tough stains, use a nonabrasive cream, then rinse with
clean water.
This filter traps odours and must
be changed at least once every
6 months depending on your level
of use. You should order these
filters from your dealer (quoting
the reference shown on the
identification plate located inside
the hood) and note the date the
filter was changed.
PRODUCTS/ACCESSORIES
TO USE
To clean the body and the lighting
port, you should use only
commercial household cleaning
products diluted in water and
then rinse using clean water,
drying with a soft cloth.
Use a commercial household
cleaning product then rinse
abundantly and dry. These filters
can be cleaned in a vertical
position in your dishwasher. (Do
not alow them touch dirty
dishes or silverware).
To keep your appliance in good working order, we recommend that you use Clearit household products.
Professional expertise for
the general public
Clearit offers you professional products and adapted solutions for the daily upkeep of your household and
kitchen appliances.
You may find them in conventional retail outlets, along with a complete line of by-products and
consumables.
b_255
31
EN
5 / TROUBLESHOOTING
SYMPTOMS SOLUTIONS
The hood is not
working...
The hood is not
operating effectively...
Ensure that:
• The power is not cut off.
• A speed has been selected.
Ensure that:
• The selected motor speed is sufficient for the
quantity of smoke and vapours to be cleared.
• The kitchen is sufficiently ventilated to allow une
for fresh air intake.
• The charcoal filter is not worn (hood operating in
filtering mode).
Ensure that:
The hood stopped
working
EN
6 / AFTER SALES SERVICE
Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and
serial number). This information appears on the manufacturer’s nameplate attached to your
equipment.
• The power is not cut off.
• The single-pole cut-off device was not activated.
32
b_255
Loading...