DCCOM 5KP90A, 5KP90, 5KP85A, 5KP85, 5KP8.0A Datasheet
...
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
5KP5.0
THRU
5KP180CA
R-6
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. 5KP5.0C, 5KP180CA).
Electrical characteristics apply in both directions
NOTES :
2. Mounted on Copper Leaf area of 0.8 X 0.8*( 20 X 20mm ) per Fig. 5
1. Non-repetitive current pulse, per Fig.3 and derated above TA= 25oC per Fig.2.
TJ, T
STG
-55 to + 175
0
C
Operating and Storage Temperature Range
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load( JEDEC Method ) (Note 3)
Steady State Power Dissipation at TL = 75oC
Lead Lengths
.375"(9.5mm) (Note 2)
SYMBOL
P
M(AV)
I
FSM
Amps
UNITS
Maximum Instantaneous Forward Voltage at 100A for Unidirectional
Only
Watts
Peak Pulse Power Dissipation on 10/1000 µs waveform
(Note1,FIG.1)
Minimum 5000
8.0
400
VALUE
P
PPM
Watts
V
F
3.5 Volts
RECTIFIER SPECIALISTS
R
DC COMPONENTS CO., LTD.
VOLTAGE RANGE - 5.0 to 180 Volts
PEAK PULSE POWER - 5000 Watts
TECHNICAL SPECIFICATIONS OF
TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
* Glass passivated junction
* 5000 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 2.1 gram
180
R
DC COMPONENTS CO., LTD.
RATING AND CHARACTERISTIC CURVES ( 5KP5.0 THRU 5KP180CA )
181
Loading...