The global group of dBTechnologies companies develops and manufactures individual speaker
components autonomously, and often specifically for the given application. We do not subscribe
to the pract ice of equalizing and optimizing speakers with elaborate technology to br ing them
up to our standards. Instead, it has been our long-standing policy to build from the bottom up
components with specs tailored to deliver the best audio performance for the application.
DVA T12 is a step up the evolut ionar y la dder fr om th e successf ul DVA T4 lin e array system. Althou gh
it prov ides more power and has greater range, its active three-way design makes it just as easy to
set up and install as its predecessor.
T12
Full of Technology
LONG-THROW SYSTEM
FULLY POWERED THREE-WAY UNIT
FREELY SCALABLE TO SETUPS OF ANY SIZE
LOSSLESS SIGNAL PATH WITH NO NEED FOR SPEAKER CABLES
SEQUENTIALLY CONFIGURABLE ARRAY SEGMENTS
HIGH-END DIGITAL CONTROLLER (DSP) ON BOARD
NETWORK-READY WITH AN INTEGRATED RDNET PORT
HARDWARE COMPATIBLE WITH DVA T8 SYSTEMS
NONE OF THE IMPEDANCE AND AMP CHANNEL AVAILABILITY
CONCERNS ASSOCIATED WITH PASSIVE MODELS
3-Way Active
3
-
Way Active
Line Array Module
Line Array Module
DVA T12
Technical Data
Speaker Type: 3-Way Active Line Array Module
Acoustical data
Frequenc y Response [+/- 3dB]: 60 - 19.000 Hz
Max SPL: One Unit: 136 dB
HF: 3x1 “
Voice Coil HF: 1.4 “
Directivity: 100x10° Single unit
Horn: Integrated CD Horn
MF: 2x 6.5 “
Type MF: Neodymium Sealed Basket Phase
Plug Horn Loaded
Voice Coil MF: 2 “
LF: 12 “
Type LF: Neodymium
Voice Coil LF: 3 “
Amplifier
Amp Technology: Digipro® G2
Amp Class: Class D
HF Amp: 350 W RMS
MF Amp: 350 W RMS
LF Amp: 710 W RMS
Cooling: Convection
Processor
Controller: DSP 56 bit
AD/DA Conver ter: 24 bit/96 kHz
System Presets: 8, HF/Low- mid correc tion
Limiter: Dual Active Limiter Multiband RMS,
Peak, Thermal
Crossover Frequency MF-HF: 1800 Hz
Slope MF-HF: 24 dB/Octave
Crossover Frequency LF-MF: 420 Hz
Slope LF-MF: 24 dB/Octave
Input
Signal Input: 1x XLR fem, Bal.
Signal Output: 1x XLR male, Bal.
Network: RDnet remote control RJ45 connector
IN/OUT
Power Socket: 1x Powercon In 1x Powercon Out
Voltage Range: 90 - 240 V
Mechanics
Housing: Polypropylen PP Aluminium reinforced
Housing Design: Trapezoidal 10°
Rain cover: Included
Rigging Points: Integrated rigging hardware
Width: 580 mm (23.2 in)
Height: 386 mm (15.44 in)
Depth: 430 mm (17.2 in)
Weight: 29,9 kg (63.93 lbs)
The DVA T12 features state- of-the-art neodymium speakers and
high-performance digital amps with total of 1,410W output power.
In combination with top-drawer DSP and premium quality AD-DA
converter, it delivers high- definition sonic images with massive SPL
for large sound reinforcement applications.
Weighing just 29kg, this remarkably compact unit belies its
unobtrusive look by enabling you to set up very powerful line arrays
that deliver extraordinary performance.
7
Active Line Array Module
Extended low-end performance
A 12“ neodymium woofer in a band-pass housing covers the low frequency range.
Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to
enable fullrange applications. The 12“ woofer is slanted inside the housing, giving
the cabinet a lean, unobtrusive look.
12“ neodymium woofer
T12
LF
Fullrange capability from 60Hz up
T12
T12
MF
HF
Accurate and awesomely efficient midrange response
The DVA T12‘s two 6.5“ neodymium midrange are placed close together to maximize
coherent coupling and response for those critical midrange frequencies. The
speaker resides in a sealed basket to optimize the displacement volume. This makes
the midrange even more responsive.
With a high BL factor, it reacts far faster to transients and renders each attack with
awesome accuracy. Both 6.5“ midrange are equipped with an optimized phase plug
and feed into a frontloaded horn to achieve a uniform coverage pattern.
High-definition top end
The 1“ neodymium HF drivers feature 1.4“ Mylar diaphragms. Exceptionally light
and responsive, they deliver richly detailed signals with remarkably linear frequency
response. Specially developed for use in line arrays, these ultra compact drivers may
be deployed in very close proximity to one another. This is essential to minimize
interference in such arrays.
The DVA T12 is loaded with three HF drivers tuned specifically for the
custom designed array horn. This combination maximizes the coupling of
the drivers‘ outputs and extends the range of the HF signal.
Consistent coverage pattern
The DVA T12 features constant directivity horns, HF drivers, and midrange speakers
optimized to deliver a uniform 100°-by-10° coverage pattern.
The DVA makes the most of two acoustical effects to help distribute SPL evenly.
One is the vector addition of individual horns‘ output, with the other being cylindrical wave formation. The coverage pattern may be adapted to suit the sound
reinforcement application by varying the length of the array and adjusting the splay
between individual components.
T12
Uniform 100°-by-10° coverage pattern
Evenly distributed SPL
8
Top Performance Combined With Total Control
Ground stacks
DRK-10 and DRK-20 harnesses can also serve to stack cabinets on the ground when rigging
points are unavailable or the ceiling is too low. A special bracket adjusts the inclination down
to 7.5°. The DRK-10/20 fits perfectly on an upright DVA S30 subwoofer. Equipped with two
receptacles for quick-release pins, it is readily attached without tools.
The DVA S30 subwoofer sports two 18“ speakers, a bass reflex horn, a 3000W power amp, and
an internal DSP. (To learn more about it, see the chapter entitled Active Subwoofer).
Line array benefits in ground-stacked configurations
DVA T12
Compatible with DVA T8 units:
DVA T12 and DVA T8 series housings and rigging hardware are compatible.
This means DVA T8 units may be flown right below a T12 array for use as down-fills in large
PA systems.
Compatible DVA T8’s may serve as far-fill extensions
Power Supply
The PFC switched-mode power supply allows up to four DVA T12 units
to be connected to one phase.
When connecting large systems (up to 12 units), we recommend
splitting up the power feed using a 16ACEKON adapter, tapped and
spliced to feed three weatherproofed Power-Con connectors.
PfC
P
f
C
PfC
9
Loading...