Daxten SCOUTCOMBO 16, SCOUTCOMBO 8, SCOUTcombo Installation Manual

SCOUTcombo
Installation guide
Specifications
1013-108
8 port KVM Switch
1013-116
16 port KVM Switch
Cables & Accessories
2094-02PU
USB & PS/2 Cable Set 1.8m
2094-05PU
USB & PS/2 Cable Set 5.0m
2094-03PU
USB & PS/2 Cable Set 3.0m
Package Contents
1013-108
1013-116
9014-00A 5 v PSU Rackmount Brackets
9014-00A 5 v PSU Rackmount Brackets
Physical Properties
Height
Width
Depth
Unit Weight
8 Port
4.5 cm
44.0 cm
15.7 cm
1.90 kg
16 Port
4.5 cm
44.0 cm
15.7 cm
1.90 kg
Operation and Storage parameters
Operating Temperature:
0~50° C (32 to 122° F)
Storage Temperature:
-20~60° C (-4 to 140° F)
Humidity:
0~80% RH non-condensing
Power
Via External PSU.
Resolution
2048 x 1536 @ 85Hz
Selection Method
Push button, Hot Key (PS/2 or USB Keyboards) and On Screen Display
LED’s
Red - PC selected. Green – PC on line.
Connections
Computer Ports
16 Port
Monitor
16 sets: HD 15 pin Female USB & PS/2 signals combined
Keyboard, Mouse
Console Ports
1 set: HD 15 pin Female
Keyboard
1 set: PS/2 6 pin mini DIN 1 set: USB A-type*
Mouse
1 set: PS/2 6 pin mini DIN 1 set: USB A-type*
* USB HID devices only
© Copyright 2007. All rights reserved. Daxten, the Daxten logo, SCOUTcombo and The Brains Behind KVM Switching and Sharing are trademarks of Daxten
Industries. All other trademarks acknowledged. Revision 1.0
SCOUTcombo
Introduction
Thank you for purchasing the SCOUTcombo Switch. This product will ensure easy and accurate control over 8 to 16 Servers through a single console. The SCOUTcombo is compatible with USB style computers. The SCOUTcombo supports high resolutions of up to 2048 x 1536 without any deterioration of the image quality. Switching between PCs can be accomplished in three ways: through keyboard Hot Key commands, the On Screen Display (OSD) or by using the convenient front panel PC selection buttons.
Product Features
Allows a user to control 8 – 16 computers from one console. No additional software is required for operation. Supports Monitor resolutions of up to 2048 x 1536 @ 85Hz. Supports VGA, SVGA and MultiSync monitors. Select via Push-button, Keyboard Hot Key control or Menu Driven OSD Comes with Auto-Scan mode for convenient automatic switching. Front panel status LEDs give a clear indication of the active PC. Rack Mountable in 19” Rack (1U). Tri-Level Cascade, allowing up to 4096 Servers to controlled from one console.
Hardware Installation
Before connecting your computers and console devices to the SCOUTcombo switch, please ensure that all devices are powered off.
Using the SCOUTcombo
The SCOUTcombo provides three methods to select the desired computer. You may either use the Select button on the unit, use the keyboard Hot Key commands, or use the Menu Driven OSD.
Note: USB keyboards with an integrated USB hub are not supported.
Rear Panel Layout 164-Port switch
Loading...
+ 7 hidden pages