DAVIS New Anemometer Design for Vanatage Pro2 User Manual
Your Vantage Pro2™ has an
IMPROVED ANEMOMETER
Your Vantage Pro2 Integrated Sensor Suite includes an improved
anemometer. It now has a greater operating range of wind speeds, from
less than 1 mph to over 220 mph (1 - 173 kts; 0.5 - 89 m/s; 1 - 322 kph).
It will provide even greater durability in the eld, and provide the same
accurate data Davis weather stations are known for.
The new anemometer control head looks dierent from the old one. To
avoid confusion, please refer to these instructions and illustrations,
rather than the ones in your Vantage Pro2 ISS Installation manual.
Page 1: Components
The new housing has a dierent shape. Refer to this illustration of the
ISS components:
Rain Collector
Solar Panel
(wireless
ISS only)
SIM
Housing
Radiation
Shield
Metric Rain Adapter
(US versions only,
factory installed in
UK & EU versions)
Debris Screen
(place inside cone
after installation)
UV and Solar
Sensors
(ISS Plus Only)
Sensor
Mounting Shelf
(ISS Plus Only)
ISS Base
Console Cable 100' (30 m)
(Cabled ISS Only)
Anemometer
Arm
Anemometer Cable
40' (12.2 m)
Anemometer
Vane
Control
Wind Cups
Anemometer
Base
Head
®
Page 3:
®
In the list of parts, ignore the “drip ring.” It is now molded into the
housing.
Page 4:
Refer to this illustration when attaching the wind cups.
Push cups onto
stainless steel
shaft
Tighten set
screw with
Allen wrench
Attaching the Wind Cups
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: info@davisnet.com • www.davisnet.com
Document No. 07395.273 Rev A February 6, 2013
Vantage Pro is a registered trademark of Davis Instruments Corp. Hayward, CA.
©2013 Davis Instruments Corp. All rights reserved.
Loading...