Datto MR1750 User Manual
1
Long Range Ceiling Mount Dual Concurrent
Long Range Ceiling Mount Dual Concurrent Access Point
oint
OPEN MESH
Wireless-N / AC
Access P
MR1750
Wireless-N / AC
V1.0
1
Table of Contents
1 Introduction ....................................................................................................................................................................... 5
1.1 Features and Benefits ..................................................................................................................................................................................... 6
1.2 Package Contents ............................................................................................................................................................................................ 7
1.3 System Requirements ..................................................................................................................................................................................... 7
1.4 Applications ....................................................................................................................................................................................................... 7
2 Before you Begin ............................................................................................................................................................... 9
2.1 Considerations for Wireless Installation .................................................................................................................................................. 9
2.2 Computer Settings (in Windows XP/Windows 7) .............................................................................................................................. 10
2.3 Computer Settings in Apple Mac OS X ................................................................................................................................................. 13
2.4 Hardware Installation ................................................................................................................................................................................... 14
3 Configuring Your Access Point ...................................................................................................................................... 19
3.1 Default Settings ............................................................................................................................................................................................. 19
3.2 Web Configuration ....................................................................................................................................................................................... 20
4 Building a Wireless Network .......................................................................................................................................... 22
4.1 Access Point Mode ....................................................................................................................................................................................... 22
4.2 WDS AP Mode ............................................................................................................................................................................................... 23
4.3 WDS Bridge Mode ........................................................................................................................................................................................ 24
4.4 Repeater mode .............................................................................................................................................................................................. 25
5 Status ................................................................................................................................................................................ 26
5.1 Save/Reload .................................................................................................................................................................................................... 26
5.2 Main ................................................................................................................................................................................................................... 27
5.3 2.4G/5G Wireless Client List ...................................................................................................................................................................... 30
5.4 2.4G/5G Connection Status ....................................................................................................................................................................... 31
5.5 2.4G/5G WDS Link List ................................................................................................................................................................................ 32
2
5.6 System Log ...................................................................................................................................................................................................... 33
6 System .............................................................................................................................................................................. 34
6.1 Operation Mode ............................................................................................................................................................................................ 34
6.2 IP Settings ........................................................................................................................................................................................................ 35
6.3 Spanning Tree Setting ................................................................................................................................................................................. 36
7 2.4G/5G Wireless ............................................................................................................................................................. 38
7.1 Wireless Network .......................................................................................................................................................................................... 38
7.2 Wireless Security ........................................................................................................................................................................................... 45
7.3 Site Survey ....................................................................................................................................................................................................... 49
7.4 Wireless MAC Filtering ................................................................................................................................................................................ 53
7.5 Wireless Advanced ....................................................................................................................................................................................... 55
7.6 WPS (Wi-Fi Protected Setup) .................................................................................................................................................................... 57
7.7 WDS Link Settings ......................................................................................................................................................................................... 60
8 Management .................................................................................................................................................................... 63
8.1 Administration ................................................................................................................................................................................................ 63
8.2 Management VLAN Settings .................................................................................................................................................................... 64
8.3 Wireless Traffic Shaping ............................................................................................................................................................................. 66
8.4 SNMP Settings ............................................................................................................................................................................................... 67
8.5 Backup/Restore .............................................................................................................................................................................................. 69
8.6 Auto Reboot Settings .................................................................................................................................................................................. 70
8.7 Firmware Upgrade ........................................................................................................................................................................................ 71
8.8 Time Setting .................................................................................................................................................................................................... 72
8.9 Log ...................................................................................................................................................................................................................... 73
8.10 Diagnostics ...................................................................................................................................................................................................... 74
8.11 LED Control ..................................................................................................................................................................................................... 75
8.12 Logout ............................................................................................................................................................................................................... 76
8.13 Reset .................................................................................................................................................................................................................. 77
3
Appendix A – FCC Interference Statement .......................................................................................................................... 78
Appendix B – IC Interference Statement ............................................................................................................................. 78
Appendix C – CE Interference Statement ............................................................................................................................. 79
4
Version
Date
Notes
1.0 2013/07/31
First Release
Revision History
5
1 Introduction
The
MR1750
major functional modes. The MR1750 is designed to operate in numerous environments from large homes, small and
medium-sized businesses, multiple-floor offices, hotels and other venues to larger enterprise deployments. Its high-
powered, long-range characteristics make it a cost-effective alternative to ordinary access points that don’t have the range
and reach to connect to a growing number of wireless users who wish to connect to a large home or business network.
The MR1750 supports the 2.4GHz frequency band under 802.11 b/g/n mode while at the same time providing 5GHz band
for communicating or transferring files in a less congested network frequency band.
The MR1750 delivers up to 6x faster wireless speeds and 7x extended coverage than legacy 802.11a/b/g wireless devices.
Even though the MR1750 has been designed and engineered for traffic heavy and demanding business environments it is
also quite at home in larger house scenarios because it efficiently extends the wireless range of an existing home router,
is a high-powered, long-range dual-band concurrent wireless 802.11a/b/g/n/ac access point with four
especially in very architecturally-challenging structures to provide whole home connectivity.
To protect sensitive data during wireless transmissions, the MR1750 offers different encryption settings for wireless
transmissions including industry-standard WPA and WPA2 encryption. The MR1750 also includes MAC address filtering to
allow network administrators to offer network access only to known computers and other devices based on their MAC
addresses.
6
1.1 Features and Benefits
Features Benefits
High Speed Data Rate Up to 300 Mbps for
each band (2.4GHz / 5GHz)
10/100/1000 Gigabit Ethernet Support up to 1000Mbps wired networking speed.
Capable of handling heavy data payloads such as HD multimedia
streaming.
IEEE 802.11n Compliant and Backwards
Compatible with 802.11 a/b/g devices
Multi-Function Allowing users to select any one of the following modes: Access
Support Multiple SSID in AP mode (up to 8
in each frequency band)
WPA/WPA2/IEEE 802.1x Support Powerful data security.
MAC Address Filtering in AP Mode For more secure network connections with known users and devices.
User Isolation Support (AP mode) Offers an additional layer of protection within the network by
Power-over-Ethernet (IEEE802.3at/af) Allows installers to deploy the access point in locations via a PoE
Save User Settings Enables network administrators to save their device settings so
Fully compatible with IEEE 802.11 a/b/g/n devices.
Point, WDS AP, WDS Bridge, and Repeater depending on their
specific networking deployment need.
Allow clients to access different networks through a single access
point and assign different policies and functions for each SSID
through the built in software.
isolating specific client users.
connection (Ethernet cable) where a power outlet may not be
available.
firmware upgrades do not permanently delete previous device
settings.
SNMP Remote Configuration Management Allows remote connection to configure or manage the MR1750 easily.
QoS (WMM) support Prioritizes bandwidth-intensive and sensitive data traffic.
7
1.2 Package Contents
The MR1750 package contains the following items (all items must be in package to issue a refund):
MR1750 Access Point
Wall Mount Kit: Mounting Bracket, Wall/Ceiling Mounting Hardware Kit, T-Rail Mounting Hardware Kit
1.3 System Requirements
The following are the Minimum System Requirements in order configure the device.
Computer with an Ethernet interface or wireless network capability
Windows OS (XP, Vista, 7), Mac OS, or Linux-based operating systems
Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or another similar browser application)
1.4 Applications
Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many
applications made possible through the power and flexibility of WLANs:
a) Difficult-to-Wire Environments
There are many situations where wires cannot be installed or deployed easily or cannot be hidden from view. Older
buildings, sites with multiple buildings, and/or areas make the installation of a Ethernet-based LAN impossible,
impractical or expensive.
b) Temporary Workgroups
Create temporary workgroups/networks in more open areas within a building – auditoriums, amphitheater
classrooms, ballrooms, arenas, exhibition centers, temporary offices where one wants either a permanent or
temporary Wireless LAN established.
8
c) The Ability to Access Real-Time Information
Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing
with patients, serving customers, and/or processing information.
d) Frequently Changing Environments
Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.).
e) Small Office and Home Office (SOHO) Networks
SOHO users need a cost-effective, easy and quick installation of a small network.
f) Wireless Extensions to Existing Ethernet-based Networks
Devices like the MR1750 enable network administrators, installers and end-users to extend the range and reach of an
existing Ethernet-based network.
g) Training/Educational Facilities
Training sites at corporations or students at universities use wireless connectivity to ease access to information,
information exchanges, and learning.
9
2 Before you Begin
This section will guide you through the installation process. Placement of the OPEN MESH MR1750 is essential to
maximize the access point’s performance. Avoid placing the MR1750 in an enclosed space such as a closet, cabinet, or
stairwell.
2.1 Considerations for Wireless Installation
The operating distance of all wireless devices cannot be pre-determined due to a number of unknown obstacles in the
environment that the device is deployed in. These could be the number, thickness, and location of walls, ceilings, or other
objects that the MR1750’s wireless signals must pass through. Here are some key guidelines to allow the MR1750 to have
optimal wireless range.
Keep the number of walls and/or ceilings between the MR1750 and other network devices to a minimum. Each wall
and/or ceiling can reduce the signal strength, resulting in lower signal strength.
Building materials makes a difference. A solid metal door and/or aluminum stubs may have a significant negative
effect on the signal strength of the MR1750. Locate your wireless devices carefully so the signal can pass through a
drywall and/or open doorways. Materials such as glass, steel, metal, concrete, water (example: fish tanks), mirrors, file
cabinets and/or brick can also diminish wireless signal strength.
Interference from your other electrical devices and/or appliances that generate RF noise can also diminish the
MR1750’s signal strength. The most common types of devices are microwaves or cordless phones.
10
2.2 Computer Settings (in Windows XP/Windows 7)
In order to use the MR1750, you must first configure the TCP/IPv4 connection of your Windows OS computer system.
Click Start button and open Control Panel.
Windows XP Windows 7
11
In Windows XP, click Network Connections
In Windows 7, click View Network Status and Tasks in the Network and Internet section, then select Change
adapter settings
Right click on Local Area Connection and select Properties
12
Select “Internet Protocol Version 4 (TCP/IPv4)” and then select
Properties
Select Use the following IP address and enter an IP address that is
different from the MR1750 and subnet mask then click OK.
Note: Ensure that the IP address and subnet mask are on the same subnet as
the device.
For example: MR1750 IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC subnet mask: 255.255.255.0
13
Computer Settings in Apple Mac OS X
can be opened in the
Internet & Network
that is different from the
Ensure that the IP address and subnet mask are on the same subnet as the device.
IP address: 192.168.1.1
192.168.1.25
PC subnet mask: 255.255.255.0
or selecting it in the Apple
2.3
Go to System Preferences (
Select Network in the
Highlight Ethernet
In Configure IPv4, select Manually
Enter an IP address
Applications folder
section
MR1750 and subnet mask then press OK
Menu)
Note:
For example: MR1750
PC IP address: 192.168.1.2 –
Click Apply when done.
5
14
2.4 Hardware Installation
1. Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your
computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the MR1750 and the other end to the RJ-45
port of the computer. Ensure that the cable is securely connected to both the MR1750 and the computer.
3. Connect the Power Adapter DC connector to the DC-IN port of the MR1750 and the Power Adapter to an available
electrical outlet. Once both connections are secure, verify the following:
a) Ensure that the
b) Ensure that the
c) Ensure that the
d) Once all three lights are on, proceed to set up the access point using the computer.
This diagram depicts the hardware configuration.
POWER
2.4GHz/5GHz WLAN
LAN (Computer/MR1750 Connection)
light is on (it will be orange).
light is on (it will be green for 5G, blue for 2.4G).
light is on (it will be blue).
15
Mounting the MR1750
Using the provided hardware, the MR1750 can be attached to a ceiling or wall.
To attach the MR1750 to a ceiling or wall using the mounting bracket:
1) Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit.
2) Insert the provided short screws into the bottom cover of the MR1750.
Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket.
If extra space is required, use the provided spacers and long screws from the T-Rail mounting hardware kit to increase the
space between the unit and the mounting bracket.
16
3) Mount the MR1750 on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place.
To attach the MR1750 to a ceiling using the provided T-rail connectors:
1) Attach the T-rail connectors to the bottom cover of the MR1750 using the provided short screws.
Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm).
If extra space is required to accommodate drop ceiling tiles, use the provided spacers and long screws.
17
2) Line up the connected T-rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps
into place.
Note
: To protect your MR1750, use the Kensington security slot to attach a cable lock (cable lock is not included).
18
Front Panel
Reset Button
One click for reset the device. Press over 10 seconds for reset to factory default.
LED Lights
LED lights for
WPS, WLAN 5
G
, WLAN
2.4
G, Ethernet port
and Power.
Rear Panel
Power
DC IN for Power.
Ethernet Port
Ethernet port for RJ
-
45 cable.
Ceiling (Wall) Mount Hole
Using the provided hardware, the
MR1750
can be attached to a ceiling or wall.
Kensington Security Slot
To protect your
MR1750
, use the
Kensington security slot to attach a cable lock
.
Front Panel Rear Panel
19
IP Address
192.168.
1.1
Username / Password
admin / admin
Operation
Mode
AP / AP
3 Configuring Your Access Point
This section will show you how to configure the device using the web-based configuration interface.
3.1 Default Settings
Please use your Ethernet port or wireless network adapter to connect the Access Point.
Default Settings
20
3.2 Web Configuration
Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address
Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address.
The default username and password are
admin
. Once you have entered the correct username and password, click the
http://192.168.1.1
Login
button to open the web-base configuration page.
21
If successful, you will be logging in and see the MR1750 User Menu.
22
4 Building a Wireless Network
The MR1750 has the ability to operate in various modes. This chapter describes the operating modes of the MR1750.
4.1 Access Point Mode
In Access Point Mode, MR1750 behaves likes a central connection for stations or clients that support IEEE
802.11a/b/g/n/ac networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and
security password to associate with the MR1750. The MR1750 supports up to eight SSIDs at the same time for secure
access.
23
4.2 WDS AP Mode
The MR1750 also supports WDS AP mode. This operating mode allows wireless connections to the MR1750 using WDS
technology. In this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling
WDS Link settings. WDS supports four AP MAC addresses.
24
4.3 WDS Bridge Mode
In WDS Bridge Mode, the MR1750 can wirelessly connect different LANs by configuring the MAC address and security
settings of each MR1750 device. Use this mode when two wired LANs located a small distance apart want to communicate
with each other. The best solution is to use the MR1750 to wirelessly connect two wired LANs, as shown in the following
figure.
WDS Bridge Mode can establish four WDS links, creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency channel. More Access
Points connected together may lower throughput. This configuration can be susceptible to generate endless network loops in your network,
so it is recommended to enable the Spanning Tree function to prevent this from happening.
Loading...