DATEL UWR-5-1000-D48, UWR-5-1000-D24, UWR-15-335-D48, UWR-15-335-D24, UWR-12-420-D48 Datasheet

...
* "D24" models only
Single Output
UWR Models
Features
Figure 1. Simplified Schematic
+V
IN
–V
IN
+V
PWM
*
COMMON
The migration to distributed power is accelerating. The critical need f or accurate voltages, tight regulation and rapid transient response is propelling the move to power processing at the "point-of-use" with low-power DC/DC converters physically located right at their loads.
DATEL’s miniature, full f eatured, 5 W att UWR Models were specifically designed for today’s demanding distributed po wer architectures in aerospace, marine, telecom and computer applications. The conv erters' low cost, small size (1" x 1" x 0.45") and full 5 Watt output capability give system architects unprecedented design and la yout flexibility.
Occupying less than 0.5in
3
total volume, these extremely compact, fully regulated and isolated (1000Vdc guaranteed) modules are available with either 5, 12 or 15 V olt outputs. Input voltage ranges are either 18-36 Volts ("D24" models) or 36-72 V olts ("D48" models).
Although their overall size is 50-75% smaller than many similarly rated power modules, these 1" x 1" UWR Models are exact, drop-in, pin-for-pin replacements for many standard 2" x 1" and 2" x 2", 5 W att modules. They achiev e their small size and low cost by exploiting a novel feedback approach that does not depend upon traditional optocoupler techniques.
All models are 5-side shielded and have a non-conductive baseplate that permits pc­card runs to be placed beneath the package. Units are assembled using high-speed automated SMT techniques and are fully encapsulated with thermally conductive potting compound. Every unit is electrically tested before and after encapsulation, 100% burned­in under full load, hi-pot tested, and final-electrical tested prior to shipment. Every unit meets DATEL’s traditional high standards f or quality and long-term reliability .
Miniature, 1" x 1"
5 Watt, DC/DC Converters
DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 • Email: sales@datel.com • Internet: www.datel.com
INNOVATION and EX C ELL E N C E
®
®
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
Small size, 1" x 1" x 0.45" Full 5 Watts output power No external components required Drop-in replacements for many
standard, 2" x 1" DC/DC’s Wide input voltage ranges:
18-36V or 36-72V 5, 12, or 15V outputs Guaranteed efficiencies to 80% Fully regulated and isolated
(1000Vdc guaranteed) Output overvoltage protection and
current limiting –25 to +95
o
C operating temperature Shielded cases (5 sides) UL 1950, CSA 22.2 No. 234, IEC 950 Modifications and customs for OEM's
MINIATURE, 5 WATT DC/DC CONVERTERS
XWR Series
2
Output Power (Watts)
Ambient Temperature (°C)
–25 0 35 40 45 50 55 60 6 5 70 75 80 85 90 9
5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
I/O Connections
Function P3
+Input –Input
+Output
No Pin No Pin
Common
Notes:
For "D24" models, the case is connected to pin 2 (–V
IN).
For "D48" models, the case is connected to pin 1 (+V
IN).
Pin
1 2 3 4 5 6
15U WR 335 D24-
/
-
Input V oltage Range:
D24 = 18-36 Volts (24V nominal) D48 = 36-72 Volts (48V nominal)
Maximum Output Current
in mA
Nominal Output Voltage
5, 12 or 15 Volts
Wide Range Input
Output Configuration:
U = Unipolar
PART NUMBER STRUCTURE
TEMPERATURE DERATING
MECHANICAL SPECIFICATIONS
METAL CASE
INSULATED BASE
0.040 ±0.002 DIA. (1.016 ±0.051)
1.00
(25.40)
0.45
(11.43)
0.20 MIN. (5.08)
0.200 (5.08)
0.10
(2.54)
1.00
(25.40)
0.800
(20.32)
0.100 (2.54)
0.800
(20.32)
0.200 (5.08)
0.400
(10.16)
0.10
(2.54)
BOTTOM VIEW
3
1 2
4
6
5
UWR-5/1000-D24 5 1000 120 ±2% ±2% 24 18-36 25/282 75% C7, P3 UWR-5/1000-D48 5 1000 120 ±2 % ±2% 48 36-72 25/141 75% C7, P3 UWR-12/420-D24 12 420 150 ±2% ±2% 24 18-36 25/265 80% C7, P3 UWR-12/420-D48 12 420 150 ±2% ±2% 48 36-72 25/133 80% C7, P3 UWR-15/335-D24 15 335 150 ±2% ±2% 24 18-36 25/264 80% C7, P3 UWR-15/335-D48 15 335 150 ±2% ±2% 48 36-72 25/132 80% C7, P3
T ypical at TA = +25°C under nominal line voltage and full-load conditions unless otherwise noted.
Ripple/Noise (R/N) measured over a 20MHz bandwidth.
20% to 100% load.
Nominal line voltage, no-load/full-load conditions.
Performance Specifications and Ordering Guide
Ripple/Noise
(mVp-p, Max.)
VOUT
(Volts)
Output
Package
(Case,
Pinout)
Efficiency
(Min.)
Regulation (Max.) Line
VIN Nom.
(Volts)
Range (Volts)Model
Input
IOUT
(mA, Max.)
IIN
(mA, Max.)
Load
Case C7
Loading...
+ 4 hidden pages