Page 1
Page 2
Warranty
Standard Warranty
• Datavideo equipment is guaranteed against any manufacturing
defects for one year from the date of purchase.
• The original purchase invoice or other documentary evidence
should be supplied at the time of any request for repair under
warranty.
• Damage caused by accident, misuse, una uthorized repairs, sand,
grit or water is not covered by this warranty.
• All mail or transportation costs including insurance are at the
expense of the owner.
• All other claims of any nature are not covered.
• Cables & batteries are not covered under warranty.
• Warranty only valid within the country or region of purchase.
• Your statutory rights are not affected.
Two Year Warranty
• All Datavideo prod ucts purchased after 01-Oct.-2008 q ualify for a
free one year extension to the standard Warranty, providing the
product is registered w it h Datavideo w it hin 30 da y s of purchase. For
information on how to regi ster please visit www.datavideo-tek.com
or contact your local Datavideo office or authorized Distributors
• Certain parts with lim ited lifetime expecta ncy such as LCD P anels,
DVD Drives, Hard Drives are only covered for the first 10,000 hours,
or 1 year (whichever comes first).
Any second year warra nty c laims must b e m ade to your l ocal Datavideo
office or one of its author ized Distr ibutors bef ore t he extended war ranty
expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the prod uct indicate s that it will not be
treated as ho useho ld wa ste. It must be handed o ver t o
the applicable take back scheme f or the recycling of
electrical and e lectronic equipme nt. For more detai led
information abo ut the recycling of this product, plea se
contact your local Datavideo office.
2
Page 3
Introduction
The DDC-4012H supplies power to third party cameras or AV
equipment. The DDC -4012H is designed to be used with the Datav ideo
PD-6 Power Distribu tion Unit and CB-22H/ 23H All-In-One Cable.
The DDC-4012H automatically acc epts input voltage s between 15 and
50V DC and provides regulated 7.2V, 8.4V or 12V DC output depending
on its output switch setting. The unit allows 4pin XLR type input
connections and has options for either 4pin XLR or 5.5 mm PSU type
output connections.
Example PD-6 Set Up
3
Page 4
DC Input
DC Output
4 Pin XLR Connecti ons
15V DC ~ 50 V DC
Pin 1 = GND ( - )
Pin 2 = VCC ( + )
Pin 3 = NC
Pin 4 = NC
7.2V, 8.4V or 12V (4A Max)
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Product IP Rating = IP20
This product is NOT water or weather proof.
Datavideo recommends that this product be used
indoors.
If you wish to use this product on location or outside then
please take all appropriate precautions to protect the unit
from ingress and the user from risk of shock.
4
Page 5
Red: DC Out 12V, Amber: DC Out 8.4V
Specifications
Input
Output
Protection
Connector
Environment
Others
Voltage Range 15V~50V DC
Efficiency (Typ.) Up to 85%
DC Voltage 7.2V / 8.4V / 12V
Voltage Tolerance ±3%
Rated Current 4 A
Current Range 0~4 A
Rated Pow er 48W
Ripple & Noise(max) <400mV
105%~150% rated output power
Over Load
DC Input
4 Pin XLR M ale
DC Output
4 Pin XLR Fem ale
DC Output
5.5mm DC Jack
Working Temp. 0°C to 40°C (32°F to 102° F)
Working Humidity 10% to 90% (non condensing)
Storage Temp.
Humidity
Dimension 115 mm x 50 mm x 35 mm (L x W x H)
Weight Approx. 0.3 kg/ 0.66 lbs
Cable UL 2464 ,18AWG, L=1M
Slide S witch Select ed 7.2V, 8.4V or 12V output
LED Lamp
Protection type: Reco very automatically
after fault condition is removed
Pin1:GND , Pin2:DC IN, Pin3/4:NC
Pin1:GND , Pin2/3:NC , Pin4:DC OUT
Center: DC Out , Shell: G ND
-40°C to +85°C, 10~95% RH
Green: DC Out 7.2V
5
Page 6
6
Loading...