Datasheet ULN2004D1013TR, ULN2002D1013TR Specification

ULN2001, ULN2002

DIP-16L SO-16

(Narrow)

ULN2003, ULN2004

Seven Darlington arrays

Datasheet - production data

Description

The ULN2001, ULN2002, ULN2003 and ULN
2004 are high-voltage, high-current Darlington
arrays each containing seven open collector
Darlington pairs with common emitters. Each
channel is rated at 500 mA and can withstand
peak currents of 600 mA. Suppression diodes are
included for inductive load driving and the inputs
are pinned opposite the outputs to simplify board
layout.

Features

 Seven Darlingtons per package
 Output current 500 mA per driver (600 mA

peak)

 Output voltage 50 V
 Integrated suppression diodes for inductive

loads

 Outputs can be paralleled for higher current
 TTL/CMOS/PMOS/DTL compa tible inputs
 Input pins placed opposite to output pins to

simplify layout

The versions interface to all common logic
families: ULN2001 (general purpose, DTL, TTL,
PMOS, CMOS); ULN2002 (14 - 25 V PMOS);
ULN2003 (5 V TTL, CMOS); ULN2004 (6 - 15 V
CMOS, PMOS).

These versatile devices are useful for driving a
wide range of loads including solenoids, relay DC
motors, LED display filament lamps, thermal
printheads and high-power buffers.

The ULN2001A/2002A/2003A and 2004A are
supplied in a 16-pin DIP package with a copper
leadframe to reduce thermal resista nce. They ar e
available also in small outline pa ckage (SO-16) as
ULN2001D1/2002D1/2003D1/ 2004D1.

July 2019 DocID5279 Rev 12 1/17

This is information on a product in full production.

www.st.com

Contents ULN2001, ULN2002, ULN2003, ULN2004

Contents

1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

6 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

7.1 DIP-16L package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

7.2 SO-16 Narrow package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

8 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Diagram

ULN2001 (each driver) ULN2002 (each driver)

ULN2003 (each driver) ULN2004 (each driver)

1 Diagram

Figure 1. Schematic diagram

DocID5279 Rev 12 3/17

17

Pin configuration ULN2001, ULN2002, ULN2003, ULN2004

2 Pin configuration

Figure 2. Pin connections (top view)

4/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Maximum ratings

3 Maximum ratings

Table 1. Absolute maximum ratings

Symbol Parameter Value Unit

T

V

V

I

C

I

B

I

F

V
T

STG

T

O

I

R
A

J

Output voltage 50 V
Input voltage (for ULN2002A/D - 2003A/D -

2004A/D)
Continuous collector current 500 mA
Continuous base current 25 mA
Clamping diode continuous current 350 mA
Clamping diode reverse voltage 50 V
Operating ambient temperature range - 40 to 85 °C
Storage temperature range - 55 to 150 °C
Junction temperature 150 °C

ESD Electrostatic discharge rating - HBM 2 kV

Table 2. Thermal data

Symbol Parameter DIP-16 SO-16 Unit

R

thJA

Thermal resistance junction-ambient, Max. 70 120 C/W

Note: Maximum power dissipation is a function of T

power dissipation at any allowable ambient temperature is P
Operating at the absolute maximum T

of +150°C can affect reliability.

J

J(max)

30 V

, R

and TA. The maximum allowable

thJA

= (T

D

J(max)

– TA) / R

thJA

.

DocID5279 Rev 12 5/17

17

Electrical characteristics ULN2001, ULN2002, ULN2003, ULN2004

4 Electrical characteristics

TA = 25 °C unless otherwise specified.

Symbol Parameter Test condition Min. Typ. Max. Unit

I

CEX

V

CE(SAT)

I

I(ON)

I

I(OFF)

V

I(ON)

h

t

PLH

t

PHL

V

Output leakage current

Collector-emitter saturation
voltage (Figure 5)

Input current (Figure 6)

Input current (Figure 7)T

Input voltage (Figure 8)

DC Forward current gain

FE

(Figure 5)
Input capacitance 15 25 pF

C

I

Turn-on delay time 0.5 VI to 0.5 V
Turn-off delay time 0.5 VI to 0.5 V

Clamp diode leakage current

I

R

(Figure 9)
Clamp diode forward volt ag e

F

(Figure 10)

Table 3. Electrical characteristics

= 50 V, (Figure 3)50

V

CE

T

= 85 °C, V

A

T

= 85 °C for ULN2002, V

A

VI = 6 V (Figure 4)

= 85 °C for ULN2002, V

T

A

= 1V (Figure 4)

V

I

IC = 100 mA, IB = 250 µA 0.9 1.1

= 200 mA, IB= 350 µA 1.1 1.3

C

I

= 350 mA, IB= 500 µA 1.3 1.6

C

for ULN2002, V
for ULN2003, V

for ULN2004, V

= 12 V

V

I

= 85 °C, IC = 500 µA 50 65 µA

A

= 2 V, for ULN2002

V

CE

IC = 300 mA
for ULN2003

= 200 mA

I

C

IC = 250 mA

= 300 mA

I

C

for ULN2004

= 125 mA

I

C

= 200 mA

I

C

I

= 275 mA

C

= 350 mA

I

C

for ULN2001, VCE = 2 V,
IC = 350 mA

= 50 V 50

V

R

= 85 °C, VR = 50 V 100

T

A

I

= 350 mA 1.7 2 V

F

= 50 V (Figure 3)100

CE

= 50 V ,

CE

= 50 V ,

CE

= 17 V 0.82 1.25

I

= 3.85 V 0.93 1.35

I

= 5 V

I

1000

O
O

500

µA

500

mA

0.35 0.5

11.45

13

2.4

2.7
3

5
6
7
8

0.25 1 µs

0.25 1 µs

µA

VI

V

6/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Test circuits

5 Test circuits

Figure 3. Output leakage current Figure 4. Output leakage current (for ULN2002

only)

Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON)

Figure 7. Input current (OFF) Figure 8. Input voltage

DocID5279 Rev 12 7/17

17

Test circuits ULN2001, ULN2002, ULN2003, ULN2004

Figure 9. Clamp diode leakage current Figure 10. Clamp diode forward voltage

8/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Typical performance characteristics

I

OUT

[mA]

85°C
25°C

-30°C

VCE

SAT

[V]

IIN = 500 µA

ULN2003A

Typ

Max

Min

ULN2003A

Ta = 25 C

Iout=100mA

Iout=200mA

Iout=300mA

I

IN

[μ A]

I

OUT

[mA]

-30°C

85 °C

25 °C

VCE= 2 V

6 Typical performance characteristics

Figure 11. Collector current vs. saturation

voltage (T

= 25 °C)

J

Figure 12. Collector current vs. saturation

voltage

Figure 13. Input current vs. input voltage Figure 14. Input current vs. input voltage

(Ta = 25 °C)

Figure 15. Collector current vs. input current Figure 16. hFE vs. output current

10000

)

FE

DC Current Transfer Ratio (h

DocID5279 Rev 12 9/17

V

= 2 V

CE

85 °C

1000

25 °C

100

10

1

1 10 100 1000

Output current I

OUT

[mA]

-

40 °C

17

Typical performance characteristics ULN2001, ULN2002, ULN2003, ULN2004

020406080DC

0

100

200

300

400

500

Ic peak

(mA)

Tamb=70°C
(DIP16)

7 6 5 4 3 2

NUMBER OF ACTIVE OUTPUT

D96IN451

Figure 17. Peak collector current vs. duty c ycle

(DIP-16)

Figure 18. Peak collector current vs. duty cycle

(SO-16)

Ic peak

(mA)

500

Tamb=70°C
(SO16)

400

300

200

7

2

3

5

100

NUMBER OF ACTIVE OUTPUT

0

0 20 40 60 80 100 DC

D96IN452A

10/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Package information

7 Package information

In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.

7.1 DIP-16L package information

Figure 19. DIP-16L package outline

0015895_E

DocID5279 Rev 12 1 1/17

17

Package information ULN2001, ULN2002, ULN2003, ULN2004

Table 4. DIP-16L mechanical data

mm.

Dim.

Min. Typ. Max.

A 5.33
A1 0.38
A2 2.92 3.30 4.95

b 0.36 0.46 0.56
b2 1.14 1.52 1.78

c 0.20 0.25 0.36
D 18067 19.18 19.69
E 7.62 7.87 8.26

E1 6.10 6.35 7.11

e2.54

e1 17.78
eA 7.62
eB 10.92

L 2.92 3.30 3.81

12/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Package information

7.2 SO-16 Narrow package information

Figure 20. SO-16 package outline

DocID5279 Rev 12 13/17

17

Package information ULN2001, ULN2002, ULN2003, ULN2004

Table 5. SO-16 Narrow mechanical data

mm. inch.

Dim.

Min. Typ. Max. Min. Typ. Max.

A 1.75 0.069

a1 0.1 0.25 0.004 0.009

a2 1.6 0.063

b 0.35 0.46 0.014 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.020

c1 45° (typ.)

D(1) 9.8 10 0.386 0.394

E 5.8 6.2 0.228 0.244
e 1.27 0.050

e3 8.89 0.350

F(1) 3.8 4.0 0.150 0.157

G 4.60 5.30 0.181 0.208
L 0.4 1.27 0.150 0.050

M 0.62 0.024

S 8° (max.)

14/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004 Order codes

8 Order codes

Table 6. Order codes

Part number Package

ULN2001A DIP-16
ULN2002A DIP-16
ULN2003A DIP-16

ULN2004A DIP-16
ULN2001D1013TR SO-16 in tape and reel
ULN2002D1013TR SO-16 in tape and reel
ULN2003D1013TR SO-16 in tape and reel
ULN2004D1013TR SO-16 in tape and reel

DocID5279 Rev 12 15/17

17

Revision history ULN2001, ULN2002, ULN2003, ULN2004

9 Revision history

Table 7. Revision histor y

Date Revision Changes

05-Dec-2006 5 Order code updated and document reformatted.
28-Aug-2007 6 Added Table 1 in cover p age.

07-May-2012 7

01-Jun-2012 8

22-Jul-2015 9

07-Nov-2017 10

27-Jun-2018 11 Updated: I

09-Jul-2019 12

Modified: Figure 12 on page 9.
Added: Figure 13, 14, 15 and Figure 16 on page 9.

Updated: DIP-16L package mechanical data Table 4 on p age 12 and
Figure 19 on page 11.

Added Plastic DIP16-L package.
Removed Device summary table.
Updated Table 7: Order code.
Added Section 7.2: Plastic DIP-16L package information.
Minor text changes.

Removed plastic DIP-16L package and associated order code
ULN2003A

test condition in Table 3: Electrical characteristics.

I(ON)

Added I
and note in Table 2: Thermal data.

, VR, ESD parameters in Table 1: Absolute maximum ratings

F

16/17 DocID5279 Rev 12

ULN2001, ULN2002, ULN2003, ULN2004

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product .

ST and the ST logo are trademark s of ST. For additional information about ST trademarks, please refer to www.st.com/tr ade mark s.All other
product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2019 STMicroelectronics – All rights reserved

DocID5279 Rev 12 17/17

17