Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
Data Sheet
TSic 506F Features
•
Low cost, precision temperature sensor
•
Single-wire 11-bit digital serial signal output
•
Communication range > 10 meters
•
Resolution: 0.1°C
•
Accuracy: ±0.1°C over span of 40°C
•
Focussed measurement range: –10 to +60 ºC
•
Signal read-out every 0.1s (other rates
available on request)
•
Supply Voltage 3.0V to 5.5V
•
Package: 8-pin SOIC, 3-pin e-line, Chip on
Flex
•
Low quiescent current to minimize self-heating
and power consumption (45µA typ.)
•
System-on-chip based on advanced mixedsignal CMOS technology integrating precision
temperature sensing bandgap reference with
proportional-to-absolute-temperature (PTAT)
output, digital signal processor (DSP) core,
and electrically erasable memory (EEPROM)
TSic Family
The TSic temperature sensor IC family are fully
tested and calibrated sensors with absolute
measurement accuracy on delivery – no further
calibration needed. The TSic combines
outstanding accuracy with long term stability, yet
it is very simple to use.
The TSic series is specifically designed for high
performance, cost-effective solutions for sensing
temperature in building automation, automotive,
industrial, office automation, white goods and
low-power/mobile applications.
TSic employs a high precision bandgap
reference with PTAT output; a low-power,
precision ADC; and an on-chip DSP core with
EEPROM to precisely calibrate the output
temperature signal. The TSic series includes
ICs with two linear analog signal output options,
such as standard 0~1Vout (Supply voltage (V+) =
3.0V to 5.5V) or ratiometric (10~90% of supply
voltage); or the digital serial output signal for
interfacing with microcontrollers.
Benefits
•
Several accuracy classes available with
100% upward compatibility
•
No calibration by customer needed;
absolute calibration specified
•
Simple to integrate, reducing cost and time
for application-development
•
Fast data measurement – optimal for
temperature control
•
Packages for standard SMD, THT or
application specific assembly
•
Miniaturized solutions with Bare-Chip
(COB, COF, CSP*) or e-line packages –
very fast response time for COF
•
Very low power consumption – ideal for
mobile and standard applications
•
Field reconfiguration/recalibration option
available (high volume customers only)
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written
consent of the copyright owner.
Page 2
TSic™ 506F
Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
Data Sheet
Absolute Maximum Ratings
PARAMETER MIN MAX UNITS
Supply Voltage (V+) -0.3 6.0 V
Voltages at analog I/O
– Pins (V
INA
, V
OUTA
)
Storage Temperature
Range (T
stor
)
-0.3
-50 150 °C
V
+0.3 V
DDA
Operating Conditions
PARAMETER MIN TYP MAX UNITS
Supply1 Voltage to
Gnd (V+)
Supply Current (IV+) 2
@ V+ = 3.3V, RT
Ambient
Temperature
(T
)
amb
3
Range
External
Capacitance
between V+ and
4
(CV+)
Gnd
Output Load
Capacitance (C
)
L
Output Load
Resistance between
signal and Gnd (or
V+)
3.0 5.0 5.5 V
30 45 80 µA
-10 60 °C
80 100 470 nF
15 nF
1
MΩ
1
With supply voltage 2.7V – 3.0V
accuracy reduced.
2
Without load
3
Output signal is limited to this ambient
temperature ±3°C (with regard to calibration, offset
and gain)
4
Recommended as close to TSic V+ and Gnd Pins as possible
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
5
Accuracy = specification plus quantization error of 1 bit
(0.034°C). This device gets calibrated at 5V. For
applications where best accuracy at 3V is requested: ask
for a customer specific 3V calibrated device. Accuracy
for supply voltage within V+ = 4.5V to 5.5V, 2
σ
value.
Other TSic products with customer specific calibration
available on request: i.e. with special calibration where
the 40°C span (bandgap) with the high precision
temperature range of ±0.1 °C is shifted to another
(lower or higher) temperature range.
Temperature range limits T1, T2, T3: ±0.1°C;
Measurement range limits -10°C to +60°C: ±3°C
Page 3
TSic™ 506F
Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
Data Sheet
Output Examples for TSicTM Devices
Temp
(oC)
Temperature = (Digital Signal / 2047 ∗ 70 - 10)°C
Temp
(oF)
-10 14
0 32
25 77
60 140
Temperature Measurement Range
-10°C to 60°C or 14°F to 140°F
(Wide Range Device)
TSic-506
Digital
0x000
0x124
0x3FF
0x7FF
Package Information
TM
TSic
Other packages available on demand: TSic
506 SOP8: 150mil, Standard SMT Package, SOIC, Based on IEC 191-2Q, Type 076E35 B.
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
Page 4
TSic™ 506F
Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
Data Sheet
SOP8 Package
E-Line Package
Pin Name Description
1 V+
2 Signal
4 GND Ground
3,
TP/NC Test pin / NC
5-8
Supply voltage
(3.0-5.5V)
Temperature
output signal
Do not connect
Pin Name Description
1 GND Ground
2 Signal
4 V+
Temperature
output signal
Supply Voltage
(3.0-5.5V)
Related products and ordering information
For related products and ordering information see www.zmd.biz and ZMD “TSicTM Ordering Guide”.
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
Page 5
TSic™ 506F
Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
For the current revision of this document and for additional product information please look at
www.zmd.biz
Characteristics and specifications are subject to change without notice. ZMD assumes no obligation regarding future manufacture unless
otherwise agreed in writing. The information furnished hereby is believed to be correct and accurate. However, ZMD shall not be liable to
any customer, licensee or any other third party for any damages in connection with or arising out of the furnishing, performance or use of
this technical data. No obligation or liability to any customer, licensee or any other third party shall result from ZMD’s rendering of
technical or other services.
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
.
Page 6
TSic™ 506F
Rapid Response, Low-Cost Temperature Sensor IC with Digital Output
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.