Datasheet TAP series Specification

D

H

L

S

d

2.0 (0.079)
min

+

Dipped Radial Capacitors

Wire Form Outline

SOLID TANTALUM RESIN DIPPED TAP/TEP

Preferred Wire Forms

Figure 1 Figure 2 Figure 3

D

H

+ 4 (0.16)

1

max

L

2.0(0.08)
max

S

S

d

Wire Form C Wire Form B Wire Form S

Non-Preferred Wire Forms

Figure 4 Figure 5 Figure 6

D

(Not recommended for new designs)

D

H1 max

+0.118

(3.0)

L

1.10

(0.4

+0.25

-0.10

+0.010

-0.004

H + 3.8 (0.15)

max

+

L

)

S

S

0.079 (2)
min

d

Wire Form F Wire Form D Wire Form G

D

H

1

+

L

d

2 (0.079)
min

D

H

L

S

d

DIMENSIONS

Wire Form Figure Case Size L (see note 1) S d

Preferred Wire Forms

C Figure 1 A - R*

B Figure 2 A - J*

S Figure 3 A - J*

Non-Preferred Wire Forms

F Figure 4 A - R

(Not recommended for new designs)

D Figure 5 A - H*

G Figure 6 A - J

H

Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.

(2) For D, H, and H

For case size availability in tape and reel, please refer to pages 195-196.

*

Similar to 16.0±4.00 6.35±1.00 0.50±0.05

Figure 1

dimensions, refer to individual product on following pages.

1

A - R

188 ■ NOVEMBER 2014

16.0±4.00 5.00±1.00 0.50±0.05

(0.630±0.160) (0.200±0.040) (0.020±0.002)

16.0±4.00 5.00±1.00 0.50±0.05 BRW Tape/Reel

(0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo

16.0±4.00 2.50±0.50 0.50±0.05

(0.630±0.160) (0.100±0.020) (0.020±0.002)

3.90±0.75 5.00±0.50 0.50±0.05

(0.155±0.030) (0.200±0.020) (0.020±0.002)

16.0±4.00 2.50±0.75 0.50±0.05

(0.630±0.160) (0.100±0.020) (0.020±0.002)

16.0±4.00 3.18±0.50 0.50±0.05

(0.630±0.160) (0.125±0.020) (0.020±0.002)

(0.630±0.160) (0.250±0.040) (0.020±0.002)

millimeters (inches)

Packaging

Suffixes Available*

CCS Bulk
CRW Tape/Reel
CRS Tape/Ammo

SCS Bulk
SRW Tape/Reel
SRS Tape/Ammo

FCS Bulk

DCS Bulk
DTW Tape/Reel
DTS Tape/Ammo

GSB Bulk

HSB Bulk

Dipped Radial Capacitors

TAP Series

SOLID TANTALUM RESIN DIPPED CAPACITORS

TAP is a professional grade device manufactured
with a flame retardant coating and featuring low
leakage current and impedance, very small
physical sizes and exceptional temperature
stability. It is designed and conditioned to
operate to +125°C (see page 224 for voltage
derating above 85°C) and is available loose or
taped and reeled for auto insertion. The 15 case
sizes with wide capacitance and working voltage
ranges means the TAP can accommodate
almost any application.

LEAD-FREE COMPATIBLE

COMPONENT

MAXIMUM CASE DIMENSIONS: millimeters (inches)

Wire C, F, G, H B, S, D

Case H *H

A 8.50 (0.330) 7.00 (0.280) 4.50 (0.180)
B 9.00 (0.350) 7.50 (0.300) 4.50 (0.180)

D

+

H

C 10.0 (0.390) 8.50 (0.330) 5.00 (0.200)
D 10.5 (0.410) 9.00 (0.350) 5.00 (0.200)

E 10.5 (0.410) 9.00 (0.350) 5.50 (0.220)

F 11.5 (0.450) 10.0 (0.390) 6.00 (0.240)
G 11.5 (0.450) 10.0 (0.390) 6.50 (0.260)
H 12.0 (0.470) 10.5 (0.410) 7.00 (0.280)

J 13.0 (0.510) 11.5 (0.450) 8.00 (0.310)
K 14.0 (0.550) 12.5 (0.490) 8.50 (0.330)

L 14.0 (0.550) 12.5 (0.490) 9.00 (0.350)
M 14.5 (0.570) 13.0 (0.510) 9.00 (0.350)
N 16.0 (0.630) 9.00 (0.350)
P 17.0 (0.670) 10.0 (0.390)
R 18.5 (0.730) 10.0 (0.390)

HOW TO ORDER

TAP

475

M

035

1

D

SCS

Type

Capacitance Code

pF code: 1st two digits

represent significant figures,

3rd digit represents multiplier

(number of zeros to follow)

Capacitance Tolerance

K = ±10%

M = ±20%

(For J = ±5% tolerance,

please consult factory)

Rated DC Voltage

Suffix indicating wire form

and packaging

(see page 188)

NOVEMBER 2014 ■ 189

Dipped Radial Capacitors

TAP Series

TECHNICAL SPECIFICATIONS

Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.10 μF to 330 μF
Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for details)
Rated Voltage DC (VR)
Category Voltage (VC)
Surge Voltage (VS)
Surge Voltage (VS)
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Dissipation Factor: 0.04 for CR 0.1-1.5μF

Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level.
Qualification: CECC 30201 - 032

CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)

Capacitance Rated voltage DC (VR)

μF Code 6.3V 10V 16V 20V 25V 35V 50V

0.10 104 AA

0.15 154 AA

0.22 224 AA

0.33 334 AA

0.47 474 AA

0.68 684 AB

1.0 105 A A A C

1.5 155 A A A A D

2.2 225 A A A A B E

3.3 335 A A A B B C F

4.7 475 A A B C C E G

6.8 685 A B C D D F H

10 106 B C D E E F J
15 156 C D E F F H K
22 226 D E F H H K L

33 336 E F F J J M
47 476 F G J K M N
68 686 G H L N N

100 107 H K N N
150 157 K N N
220 227 M P R

330 337 P R

Values outside this standard range may be available on request.
AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.



+85°C: 6.3 10 16 20 25 35 50



+125°C: 4 6.3 10 13 16 23 33



+85°C: 8 13 20 26 33 46 65



+125°C: 5 9 12 16 21 28 40

0.06 for CR 2.2-6.8μF
0.08 for CR 10-68μF
0.10 for CR 100-330μF

MARKING

Polarity, capacitance, rated DC voltage, and an "A" (AVX
logo) are laser marked on the capacitor body which is made
of flame retardant gold epoxy resin with a limiting oxygen
index in excess of 30 (ASTM-D-2863).

• Polarity

• Capacitance

• Voltage

• AVX logo

190 ■ NOVEMBER 2014

• Tolerance code:
±20% = Standard (no marking)
±10% = “K” on reverse side of unit
±5% = “J” on reverse side of unit

+

A

10μ
16

Dipped Radial Capacitors

TAP Series

RATINGS AND PART NUMBER REFERENCE

AVX Case Capacitance (μA) % Max. (Ω)

Part No. Size μF Max. Max. @ 100 kHz

TAP 335(*)006 A 3.3 0.5 6 13.0
TAP 475(*)006 A 4.7 0.5 6 10.0
TAP 685(*)006 A 6.8 0.5 6 8.0
TAP 106(*)006 B 10 0.5 8 6.0
TAP 156(*)006 C 15 0.8 8 5.0
TAP 226(*)006 D 22 1.1 8 3.7
TAP 336(*)006 E 33 1.7 8 3.0
TAP 476(*)006 F 47 2.4 8 2.0
TAP 686(*)006 G 68 3.4 8 1.8
TAP 107(*)006 H 100 5.0 10 1.6
TAP 157(*)006 K 150 7.6 10 0.9
TAP 227(*)006 M 220 11.0 10 0.9
TAP 337(*)006 P 330 16.6 10 0.7

TAP 225(*)010 A 2.2 0.5 6 13.0
TAP 335(*)010 A 3.3 0.5 6 10.0
TAP 475(*)010 A 4.7 0.5 6 8.0
TAP 685(*)010 B 6.8 0.5 6 6.0
TAP 106(*)010 C 10 0.8 8 5.0
TAP 156(*)010 D 15 1.2 8 3.7
TAP 226(*)010 E 22 1.7 8 2.7
TAP 336(*)010 F 33 2.6 8 2.1
TAP 476(*)010 G 47 3.7 8 1.7
TAP 686(*)010 H 68 5.4 8 1.3
TAP 107(*)010 K 100 8.0 10 1.0
TAP 157(*)010 N 150 12.0 10 0.8
TAP 227(*)010 P 220 17.6 10 0.6
TAP 337(*)010 R 330 20.0 10 0.5

TAP 155(*)016 A 1.5 0.5 4 10.0
TAP 225(*)016 A 2.2 0.5 6 8.0
TAP 335(*)016 A 3.3 0.5 6 6.0
TAP 475(*)016 B 4.7 0.6 6 5.0
TAP 685(*)016 C 6.8 0.8 6 4.0
TAP 106(*)016 D 10 1.2 8 3.2
TAP 156(*)016 E 15 1.9 8 2.5
TAP 226(*)016 F 22 2.8 8 2.0
TAP 336(*)016 F 33 4.2 8 1.6
TAP 476(*)016 J 47 6.0 8 1.3
TAP 686(*)016 L 68 8.7 8 1.0
TAP 107(*)016 N 100 12.8 10 0.8
TAP 157(*)016 N 150 19.2 10 0.6
TAP 227(*)016 R 220 20.0 10 0.5

TAP 105(*)020 A 1.0 0.5 4 10.0
TAP 155(*)020 A 1.5 0.5 4 9.0
TAP 225(*)020 A 2.2 0.5 6 7.0
TAP 335(*)020 B 3.3 0.5 6 5.5
TAP 475(*)020 C 4.7 0.7 6 4.5
TAP 685(*)020 D 6.8 1.0 6 3.6
TAP 106(*)020 E 10 1.6 8 2.9
TAP 156(*)020 F 15 2.4 8 2.3
TAP 226(*)020 H 22 3.5 8 1.8
TAP 336(*)020 J 33 5.2 8 1.4
TAP 476(*)020 K 47 7.5 8 1.2
TAP 686(*)020 N 68 10.8 8 0.9
TAP 107(*)020 N 100 16.0 10 0.6

6.3 volt @ 85°C (4 volt @ 125°C)

10 volt @ 85°C (6.3 volt @ 125°C)

16 volt @ 85°C (10 volt @ 125°C)

20 volt @ 85°C (13 volt @ 125°C)

DCL DF ESR

TAP 105(*)025 A 1.0 0.5 4 10.0
TAP 155(*)025 A 1.5 0.5 4 8.0
TAP 225(*)025 A 2.2 0.5 6 6.0
TAP 335(*)025 B 3.3 0.6 6 5.0
TAP 475(*)025 C 4.7 0.9 6 4.0
TAP 685(*)025 D 6.8 1.3 6 3.1
TAP 106(*)025 E 10 2.0 8 2.5
TAP 156(*)025 F 15 3.0 8 2.0
TAP 226(*)025 H 22 4.4 8 1.5
TAP 336(*)025 J 33 6.6 8 1.2
TAP 476(*)025 M 47 9.4 8 1.0
TAP 686(*)025 N 68 13.6 8 0.8

TAP 104(*)035 A 0.1 0.5 4 26.0
TAP 154(*)035 A 0.15 0.5 4 21.0
TAP 224(*)035 A 0.22 0.5 4 17.0
TAP 334(*)035 A 0.33 0.5 4 15.0
TAP 474(*)035 A 0.47 0.5 4 13.0
TAP 684(*)035 A 0.68 0.5 4 10.0
TAP 105(*)035 A 1.0 0.5 4 8.0
TAP 155(*)035 A 1.5 0.5 4 6.0
TAP 225(*)035 B 2.2 0.6 6 5.0
TAP 335(*)035 C 3.3 0.9 6 4.0
TAP 475(*)035 E 4.7 1.3 6 3.0
TAP 685(*)035 F 6.8 1.9 6 2.5
TAP 106(*)035 F 10 2.8 8 2.0
TAP 156(*)035 H 15 4.2 8 1.6
TAP 226(*)035 K 22 6.1 8 1.3
TAP 336(*)035 M 33 9.2 8 1.0
TAP 476(*)035 N 47 10.0 8 0.8

TAP 104(*)050 A 0.1 0.5 4 26.0
TAP 154(*)050 A 0.15 0.5 4 21.0
TAP 224(*)050 A 0.22 0.5 4 17.0
TAP 334(*)050 A 0.33 0.5 4 15.0
TAP 474(*)050 A 0.47 0.5 4 13.0
TAP 684(*)050 B 0.68 0.5 4 10.0
TAP 105(*)050 C 1.0 0.5 4 8.0
TAP 155(*)050 D 1.5 0.6 4 6.0
TAP 225(*)050 E 2.2 0.8 6 3.5
TAP 335(*)050 F 3.3 1.3 6 3.0
TAP 475(*)050 G 4.7 1.8 6 2.5
TAP 685(*)050 H 6.8 2.7 6 2.0
TAP 106(*)050 J 10 4.0 8 1.6
TAP 156(*)050 K 15 6.0 8 1.2
TAP 226(*)050 L 22 8.8 8 1.0

(*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5%

NOTE: Voltage ratings are minimum values. AVX reserves the right to supply high­er voltage ratings in the same case size.

AVX Case Capacitance (μA) % Max. (Ω)

Part No. Size μF Max. Max. @ 100 kHz

25 volt @ 85°C (16 volt @ 125°C)

35 volt @ 85°C (23 volt @ 125°C)

50 volt @ 85°C (33 volt @ 125°C)

DCL DF ESR

NOVEMBER 2014 ■ 191