Datasheet STTH3010-Y Datasheet (ST)

Features

STTH3010-Y

Automotive ultrafast recovery - high voltage diode

Datasheet − production data

■ AEC-Q101 qualified

■ Ultrafast soft recovery

■ Very low conduction and switching losses

■ High frequency and/or high pulsed current

operation

■ High reverse voltage capability

■ High junction temperature

■ ECOPACK

®

2 compliant component

(STTH3010WY)

Description

The high quality design of this diode has
produced a device with low leakage current,
regularly reproducible characteristics and intrinsic
ruggedness. These characteristics make it ideal
for heavy duty applications that demand long term
reliability like automotive applications.

The improved performance in low leakage
current, and therefore thermal runaway guard
band, is an immediate competitive advantage for
this device.

A

K

NC

D2PAK

STTH3010GY

K

DO-247

STTH3010WY

Table 1. Device summary

I

F(AV)

V

RRM

T

j

(typ) 1.30 V

V

F

t

(typ) 42 ns

rr

K

A

A

30 A

1000 V

175 °C

June 2012 Doc ID 018923 Rev 1 1/9

This is information on a product in full production.

www.st.com

9

Characteristics STTH3010-Y

1 Characteristics

Table 2. Absolute ratings (limiting values at 25 °C, unless otherwise specified)

Symbol Parameter Value Unit

V

RRM

I

F(RMS)

I

F(AV)

I

FRM

I

FSM

T

Table 3. Thermal parameters

Repetitive peak reverse voltage 1000 V

Forward rms current 50 A

Average forward current, δ = 0.5

DO-247 T

2

PA K Tc = 105 °C

D

= 105 °C

c

Repetitive peak forward current tp = 5 µs, F = 5 kHz square 300 A

Surge non repetitive forward current tp = 10 ms Sinusoidal 180 A

Storage temperature range -65 to +175 °C

stg

T

Operating junction temperature range -40 to +175 °C

j

30 A

Symbol Parameter Value Unit

DO-247

R

th(j-c)

Table 4. Static electrical characteristics

Junction to case

2

PA K

D

1.1 °C/W

Symbol Parameter Test conditions Min. Typ Max. Unit

(1)

I

R

V

1. Pulse test: tp = 5 ms, δ < 2%

2. Pulse test: t

Reverse leakage current

(2)

Forward voltage drop

F

= 380 µs, δ < 2%

p

To evaluate the conduction losses use the following equation:
P = 1.3 x I

F(AV)

+ 0.013 I

F2(RMS)

Tj = 25 °C

VR = V

I

= 30 A

F

RRM

= 125 °C 10 100

T

j

= 25 °C

T

j

= 150 °C 1.3 1.7

T

j

15

µA

2

VTj = 100 °C 1.4 1.8

2/9 Doc ID 018923 Rev 1

STTH3010-Y Characteristics

Table 5. Dynamic characteristics

Symbol Parameter

Reverse recovery time

t

rr

I

Reverse recovery current

RM

S Softness factor

t

Forward recovery time

fr

V

Forward recovery voltage

FP

Figure 1. Conduction losses versus

average current

Test conditions

= 1 A, dIF/dt = -50 A/µs,

I

F

VR = 30 V, Tj = 25 °C

I

= 1 A, dIF/dt = -100 A/µs,

F

VR = 30 V, Tj = 25 °C

I

= 1 A, dIF/dt = -200 A/µs,

F

VR = 30 V, Tj = 25 °C

IF = 30 A, dIF/dt = -200 A/µs,
VR = 600 V, Tj = 125 °C

I

= 30 A, dIF/dt = -200 A/µs,

F

VR = 600 V, Tj = 125 °C

IF = 30 A dIF/dt = 100 A/µs
VFR = 1.5 x V

= 30 A, dIF/dt = 100 A/µs,

I

F

= 25 °C

T

j

, Tj = 25 °C

Fmax

Figure 2. Forward voltage drop versus

forward current

Min. Typ Max. Unit

100

53 70

ns

42 55

24 32 A

1

450 ns

5V

P(W)

70
65
60
55
50
45
40
35
30
25
20
15
10

5
0

0 5 10 15 20 25 30 35 40

=0.05

=0.1

I (A)

F(AV)

=0.2

=0.5

T

Figure 3. Relative variation of thermal

impedance junction to case
versus pulse duration

Z/R

th(j-c) th(j-c)

1.0

Single pulse

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

1.E-03 1.E-02 1.E-01 1.E+00

t (s)

p

I (A)

FM

=1

200
180
160
140
120
100

80
60
40
20

0

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Tj=150°C

(Maximum values)

Tj=150°C

(Typical values)

(Maximum values)

V (V)

FM

Tj=25°C

Figure 4. Peak reverse recovery current

versus dI

I (A)

RM

60

VR=600V

=125°C

T

j

50

40

30

20

10

0

IF=0.5 x I

F(AV)

0 50 100 150 200 250 300 350 400 450 500

/dt (typical values)

F

IF= 2 x I

IF= I

F(AV)

dI /dt(A/µs)

F

F(AV)

Doc ID 018923 Rev 1 3/9

Characteristics STTH3010-Y

Figure 5. Reverse recovery time versus

dI

/dt (typical values)

F

t (ns)

rr

700

600

500

400

IF= 2 x I

F(AV)

IF=I

)

F(AV

VR=600V
T

=125°C

j

300

200

100

dI /dt(A/µs)

0

0 50 100 150 200 250 300 350 400 450 500

F

IF=0.5 x I

F(AV)

Figure 7. Softness factor versus

dI

/dt (typical values)

F

S factor

1.50

1.25

1.00

0.75

dI /dt(A/µs)

0.50
0 50 100 150 200 250 300 350 400 450 500

F

IF= 2 x I

VR=600V

=125°C

T

j

F(AV)

Figure 6. Reverse recovery charges versus

dIF/dt (typical values)

Q (µC)

rr

7

VR=600V
T

=125°C

j

6

5

4

IF= 2 x I

F(AV)

IF= I

F(AV)

3

IF=0.5 x I

2

1

0

0 50 100 150 200 250 300 350 400 450 500

dI /dt(A/µs)

F

F(AV)

Figure 8. Relative variations of dynamic

parameters versus junction
temperature

2.0

1.8

1.6

S

factor

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0
25 50 75 100 125

t

RR

I

Q

RR

RM

T (°C)

j

IF= I

VR=600V

Reference: T

F(AV)

=125°C

j

4/9 Doc ID 018923 Rev 1

STTH3010-Y Characteristics

FP

IF= I

Tj=125°C

versus dI

F(AV)

/dt (typical values)

F

dI /dt(A/µs)

F

Figure 10. Forward recovery time versus dI

(typical values)

t (ns)

fr

800

700

600

500

400

300

dI /dt(A/µs)

200

0 100 200 300 400 500

F

Figure 9. Transient peak forward voltage

V (V)

25

20

15

10

5

0

0 100 200 300 400 500

Figure 11. Junction capacitance versus reverse voltage applied (typical values)

C(pF)

1000

100

V

osc

F=1MHz

=30mV

Tj=25°C

RMS

IF= I

F(AV)

VFR= 1.5 x VFmax.

=125°C

T

j

F

/dt

V (V)

10

1 10 100 1000

R

Doc ID 018923 Rev 1 5/9

Package information STTH3010-Y

2 Package information

● Epoxy meets UL94, V0

● Cooling method: by conduction (C)

● Recommended torque value: 0.80 N·m (DO-247)

● Maximum torque value: 1.0 N·m (DO-247)

In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
specifications, grade definitions and product status are available at: www.st.com
ECOPACK

Table 6. DO-247 dimensions

®

packages, depending on their level of environmental compliance. ECOPACK®

®

is an ST trademark.

.

Dimensions

Ref.

Millimeters Inches

Min. Max Min. Max.

A 4.85 5.15 0.191 0.203

V

V

Dia

D 2.20 2.60 0.086 0.102

E 0.40 0.80 0.015 0.031

F 1.00 1.40 0.039 0.055

H

L5

L

L2

F2

L1

L3

V2

F3

F

G

A

L4

D

ME

F2 2.00 0.078

F3 2.00 2.40 0.078 0.094

G 10.90 0.429

H 15.45 15.75 0.608 0.620

L 19.85 20.15 0.781 0.793

L1 3.70 4.30 0.145 0.169

L2 18.50 0.728

L3 14.20 14.80 0.559 0.582

L4 34.60 1.362

L5 5.50 0.216

M 2.00 3.00 0.078 0.118

V5° 5°

V2 60° 60°

Dia. 3.55 3.65 0.139 0.143

6/9 Doc ID 018923 Rev 1

STTH3010-Y Package information

Table 7. D2PAK dimensions

Dimensions

Ref.

Millimeters Inches

Min. Max Min. Max.

A

L2

E

C2

A 4.40 4.60 0.173 0.181

A1 2.49 2.69 0.098 0.106

A2 0.03 0.23 0.001 0.009

B 0.70 0.93 0.027 0.037

D

L

L3

G

A1

B2
B

C

R

B2 1.14 1.70 0.045 0.067

C 0.45 0.60 0.017 0.024

C2 1.23 1.36 0.048 0.054

D 8.95 9.35 0.352 0.368

E 10.00 10.40 0.393 0.409

G 4.88 5.28 0.192 0.208

2mm min.
FLAT ZONE

A2

V2

L 15.00 15.85 0.590 0.624

L2 1.27 1.40 0.050 0.055

L3 1.40 1.75 0.055 0.069

M 2.40 3.20 0.094 0.126

R 0.40 typ. 0.016 typ.

V2 0° 8° 0° 8°

Figure 12. D2PAK footprint (all dimensions in mm)

16.90

10.30

8.90

3.70

5.08

1.30

Doc ID 018923 Rev 1 7/9

Ordering information STTH3010-Y

3 Ordering information

Table 8. Ordering information

Order code Marking Package Weight Base qty Delivery mode

STTH3010WY STTH3010WY DO-247 4.4 g 30 Tube

STTH3010GY-TR STTH3010GY D2PAK 1.49 g 1000 Tape and reel

4 Revision history

Table 9. Document revision history

Date Revision Description of Changes

28-Jun-2012 1 First issue.

8/9 Doc ID 018923 Rev 1

STTH3010-Y

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2012 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

Doc ID 018923 Rev 1 9/9