Page 1
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
❈ Verify the above model numbers when placing orders.
PRESSURE TRANSDUCERS
● Compact and light weight
● For non-corrosive gases
● Dual in line package
● Pressure range ~9.81, ~981 kPa {~0.1, ~10 kgf/cm
2
}
■ FEATURES
Part name Material
Housing LCP (Liquid crystal polymer)
Aluminum
Silicone
Ceramic
Phosphor bronze + Au-plated
Cover
Sensor chip
Chip resistor
(compensatory resistor)
Terminal pin
1
2
3
4
5
INTERNAL STRUCTURE (BN type)
■ MODEL NUMBER DESIGNATION
Series name
Rated pressure range
101 : 0 ~ 9.81 kPa {0 ~ 0.1 kgf/cm2}
501 : 0 ~ 49.0 kPa {0 ~ 0.5 kgf/cm
2
}
102 : 0 ~ 98.1 kPa {0 ~ 1 kgf/cm
2
}
352 : 0 ~ 343 kPa {0 ~ 3.5 kgf/cm
2
}
502 : 0 ~ 490 kPa {0 ~ 5 kgf/cm
2
}
702 : 0 ~ 686 kPa {0 ~ 7 kgf/cm
2
}
103 : 0 ~ 981 kPa {0 ~ 10 kgf/cm
2
}
Terminal direction
AN : Same direction as the pressure port
BN : Opposite direction to the pressure port
Thermal error
15 : ± 0.15 % (± 0.12 %) F.S./°C
Pressure reference
G : Gauge
■ LIST OF MODEL NUMBERS
Terminal
direction
Rated pressure range
kPa {kgf/cm
2
}
AN
BN
0 ~ 9.81 0 ~ 49.0 0 ~ 98.1 0 ~ 343 0 ~ 490 0 ~ 686 0 ~ 981
{0 ~ 0.1} {0 ~ 0.5} {0 ~ 1} {0 ~ 3.5} {0 ~ 5} {0 ~ 7} {0 ~ 10}
A
P-2000-101G-15-ANA P-2000-501G-15-ANA P-2000-102G-15-ANA P-2000-352G-15-ANA P-2000-502G-15-ANA P-2000-702G-15-ANA P-2000-103G-15-AN
P-2000-101G-15-BN P-2000-501G-15-BN P-2000-102G-15-BN P-2000-352G-15-BN P-2000-502G-15-BN P-2000-702G-15-BN P-2000-103G-15-BN
The AN version, marked A is manufactured upon receipt of order basis.
P-2000
Pressure
2
3
5
4
1
P-2000 - 501 G - 15 - BN
Page 2
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
P-2000
PRESSURE TRANSDUCERS
■ STANDARD SPECIFICATIONS
■ ENVIRONMENTAL CHARACTERISTICS
Item
Pressure reference
Rated pressure range
Maximum pressure
Break-down pressure
Operating temp. range
Compensated temp. range
Storage temp.
Operating humidity
Thermal error
(Reference temp.: 25 °C)
Excitation current
Offset voltage
Span voltage
Bridge resistance
Linearity/Hysteresis
Pressure medium
Insulation resistance
Dielectric strength
Pressure port
Response
Net weight
Model number
P-2000
101G 501G 102G 352G 502G 702G 103G
Gauge
9.81 49.0 98.1 343 490 686 981
{0.1} {0.5} {1.0} {3.5} {5} {7} {10.0}
19.6 98.1 196 686 981 1373 1471
{0.2} {1.0} {2.0} {7.0} {10} {14} {15.0}
49.0 245 490 1030 1471 1961 1961
{0.5} {2.5} {5} {10.5} {15} {20} {20}
Non-corrosive gases
Approx. 1
± 20 ± 15
50 ± 20 90 ± 30
Approx. 1
3300 ± 30 %
1.5 (Constant current)
100 (500 V DC)
500 V AC, 60 s (Leakage current 1 mA maximum)
φ
3.2
0 ~ 50
35 ~ 85 (No condensation)
−
20 ~ 80 (Atmospheric pressure, humidity 65 %RH maximum)
− 20 ~ 80
± 0.3
± 0.15 ± 0.12
± 0.05 ± 0.04
kPa {kgf/cm
2
}
kPa {kgf/cm
2
}
kPa {kgf/cm
2
}
°C
°C
%RH
°C
ZERO
%F.S./°C
%F.S.
SPAN
%F.S./°C
mA DC
mV
mV
Ω
MΩ
minimum
mm
ms
g
General specifications
Analog output
Power
❈ P-2000 series can be operated at the vacuum pressure.
Test item
Test conditions (At 25 ± 5 °C)
Permissible change
Vibration
10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s
2
,
3 directions for 2 hours each
981 m/s
2
, 3 directions for 3 times each
0 ~ Rated pressure, 10
6
cycles
40 °C, 90 ~ 95 %RH, 240 hrs.
Offset voltage/Span voltage:
±1 %F.S. maximum each
Shock
Pressure cycling
Moisture resistance
● Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation current of 1.5 mA DC.
Page 3
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
P-2000
PRESSURE TRANSDUCERS
■
INTERNAL ELECTRICAL SCHEMATICS
■ TERMINAL NUMBER
■ OUTLINE DIMENSIONS
Unless otherwise specified, tolerance : ± 0.3 (Unit: mm)
BN type
AN type
Pin Connection
1 Output
C
2 Input
B
3 Input
C
4 Output
B
5 Input
C
6 Input
B
10
3
12
PRESSURE
12
P-2000
TRANSDUCER
4
5
6
G
Pressure range marking
Vent hole
COPAL JAPAN
Pressure port
φ
1.2
R1
0
+0.1
3.2
φ
7.3 5.2 3±0.5
3.5±0.5
7.35.2
0.5(t = 0.3)
0.5(t = 0.3)
0
+0.1
3.2
φ
2.5
2.5
2.5
2.5
Pressure port
φ
1.2
10
PRESSURE
3
12
G
P-2000
TRANSDUCER
Pressure range marking
12
Vent hole
COPAL JAPAN
4
5
6
(+)
26
(+)
4
R
1
Input
(–)
35
(–)
Output
R : Built-in chip resistor for
temp. compensation
Loading...