Page 1
NTE3025
Light Emitting Diode (LED)
Description:
The NTE3025 is a red Light emitting Gallium Arsenide Phosphide diode in a T–1 3/4 (5mm) type package designed for use in applications such as instruments, printed circuit board indicators, and board
mounted panel displays.
Features:
D Low Power Consumption
D High Intensity
D IC Compatible/Low Current Requirements
D Versatile mounting on P.C. board or panel
D Reliable and Rugged
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, P
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width), I
Continuos Forward Current, I
D
F(Peak)
F
Derate Linearly Above 25°C 0.5mA/°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage, V
Operating Temperature Range, T
Storage Temperature Range, T
R
A
stg
Lead Temperature (During Soldering, .063 in. (1.6mm) from Body for 5sec), T
–55° to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–55° to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L
110mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
200mA. . . . . . . . . . . . . . . . . .
40mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+260°C. . . . . . . . . .
Electrical/Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
Luminous Intensity I
Viewing Angle 2Θ1/
Peak Emission Wavelength λP – 655 – nm
Spectral Line Half Width ∆λ – 40 – nm
Forward Voltage V
Reverse Current I
Capacitance C VF = 0, f = 1MHz – 30 – pF
V
F
R
IF = 10mA, Note 1 0.3 1.1 – mcd
Note 2 – 36 – deg.
2
IF = 20mA – 1.7 2.0 V
VR = 5V – – 100 µA
Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE (Commission Internationale De L′Eclairage) eye–response curve.
Note 2. Θ1/2 is the off–axis angle at which the liminous intensity is half the axial luminous intensity.
Page 2
.230
(5.84)
Dia
Flat Denotes
Cathode
.100 (2.54)
.100 (2.54)
.200 (5.08) Dia
.340
(6.63)
.040
(1.01)
.750
(19.05)
Min
.100 (2.54) R
Seating Plane
.050 (1.27) Typ
.025 (0.63) Max Sq
.050 (1.27)
.100 (2.54)
Tolerance ±.010 (.254)
Loading...