NJG1516KC3
- 1 -
SPDT SWITCH GaAs MMIC
nGENERAL DESCRIPTION nPACKAGE OUTLINE
NJG1516KC3 is a GaAs SPDT switch IC suited for
antenna switch of cellular phone handset.
This switch features low loss, high isolation at high power,
and exhibits wide operating frequency range from 50MHz to
3GHz at low voltage of 2.7V.
The ultra small & ultra thin FLP6-C3 package is applied.
nFEATURES
lSingle, low voltage control +2.7~+9V
lLow insertion loss 0.4dB typ. @f=1GHz, Pin=31dBm, V
CTL
=3.0V
0.5dB typ.@f=1GHz, Pin=34.5dBm, V
CTL
=3.0V
0.4dB typ. @f=1GHz, Pin=34.5dBm, V
CTL
=3.5V
0.7dB typ.@f=2GHz, Pin=31.5dBm, V
CTL
=3.0V
lHigh isolation 27dB typ.@f=1GHz, Pin=34.5dBm, V
CTL
=3.0V
25dB typ.@f=2GHz, Pin=31.5dBm, V
CTL
=3.0V
lHandling power 36dBm typ.@f=2GHz, V
CTL
=3.0V
lLow current consumption 38uA typ.@f=2GHz, Pin=34.5dBm, V
CTL
=3.0V
lUltra small & ultra thin package FLP6-C3 (Mount size: 2.8x3.0x0.75mm)
nPIN CONFIGURATION
nTRUTH TABLE
“H”=V
CTL(H)
, “L”=V
CTL(L)
NJG1516KC3
KC3 Type
(Top View)
Pin Connection
1.P1
2.GND
3.P2
4.V
CTL2
5.PC
6.V
CTL1
Orientation Mark
1
2
3 4
5
6
V
CTL1
H
L
V
CTL2
L
H
PC
-
P1
ON
OFF
PC
-
P2
OFF
ON
NJG1516KC3
- 2 -
nABSOLUTE MAXIMUM RATINGS
(Ta=25°C)
PARAMETER SYMBOL CONDITIONS RATINGS UNITS
Input Power P
in
V
CTL(L)
=0V, V
CTL(H)
=3.0V 38 dBm
Control Voltage V
CTL
V
CTL(H)-VCTL(L)
12 V
Power Dissipation P
D
500 mW
Operating Temp. T
opr
-40~+85 °C
Storage Temp. T
stg
-55~+125 °C
nELECTRICAL CHARACTERISTICS
PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS
Operating Voltage (LOW) V
CTL(L)
-0.2 0 0.2 V
Operating Voltage (HIGH) V
CTL(H)
f=1GHz, Pin=34.5dBm 2.7 3.0 9.0 V
Control Current I
CTL
f=1GHz, Pin=34.5dBm - 38 55 uA
Insertion Loss 1 LOSS1 f=1GHz, Pin=31dBm - 0.4 0.5 dB
Insertion Loss 2 LOSS2
f=1GHz, Pin=34.5dBm
V
CTL(H)
=3.5V, V
CTL(L)
=0V
- 0.4 0.5 dB
Insertion Loss 3 LOSS3 f=1GHz, Pin=34.5dBm - 0.5 0.6 dB
Insertion Loss 4 LOSS4 f=2GHz, Pin=31.5dBm - 0.7 0.8 dB
Isolation 1
(PC-P1, PC-P2)
ISL1 f=1GHz, Pin=34.5dBm 26 27 - dB
Isolation 2
(PC-P1, PC-P2)
ISL2 f=2GHz, Pin=31.5dBm 22 25 - dB
Maximum Input Power 1
*1
P
in1
V
CTL(H)
=2.7V, f=2GHz
- - 33.5 dBm
Maximum Input Power 2
*1
P
in2
V
CTL(H)
=3V, f=2GHz
- - 34 dBm
Maximum Input Power 3
*1
P
in3
V
CTL(H)
=4V, f=2GHz
- - 37 dBm
Maximum Input Power 4
*1
P
in4
V
CTL(H)
=6V, f=2GHz
- - 38 dBm
Maximum Input Power 5
*1
P
in5
V
CTL(H)
=9V, f=2GHz
- - 34.5 dBm
Pout at 0.2dB
Compression point
P
-0.2dB
1 f=2GHz
34.5 36 - dBm
VSWR 1 (PC, P1, P2) VSWR
f=0.05~2.5GHz, ON
State
- 1.45 1.55
Switching Time T
SW
f=0.05~2.5GHz - 70 - ns
*1: Maximum Input Power: This value is defined as maximum input power of linear operating region
(such as Pout at 0.05dB Gain compression point) or damage free operating region.
(V
CTL(L)
=0V, V
CTL(H)
=3V, ZS=Zl=50Ω, Ta=25°C)
NJG1516KC3
- 3 -
nELECTRICAL CHARACTERISTICS (Cellular Band)
(V
CTL(L)
=0V, V
CTL(H)
=2.7V, Zs=Zl=50Ω, Ta=25°C)
PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS
Frequency range
f
in
800 - 1000 MHz
Control voltage (HIGH)
V
CTL(H)
Pin=25dBm 2.7 - 9 V
Insertion Loss 5
LOSS5 Pin=25dBm - 0.4 0.5 dB
Isolation 3
(PC-P1, PC-P2)
ISL3 Pin=25dBm 26 27 - dB
Pout at 0.2dB
Compression point 2
P
-0.2dB
(2) 33.5 35 - dBm
Input 3rd Order
Intercept Point 1
IIP3(1)
f=900+901MHz, Pin=25dBm,
V
CTL(H)
=3V, V
CTL(L)
=0V
*2
- 62 - dBm
Input 3rd Order
Intercept Point 2
IIP3(2)
f=900+901MHz, Pin=25dBm
V
CTL(H)
=2.7V, V
CTL(L)
=0V
*2
- 60 - dBm
Second Harmonics 2fo
f=900MHz, Pin=25dBm
2nd Harmonics of Input Signal
= -83dBc
-80 - dBc
Third Harmonics 3fo
f=900MHz, Pin=25dBm
3rd Harmonics of Input Signal
=-100dBc
- -70 - dBc
VSWR 2 (PC, P1, P2) VSWR2 ON State - 1.15 1.25
*2: The input IP3 is defined as following equation.
IIP3 = (3 x Pout – IM3) / 2 + LOSS
NJG1516KC3
- 4 -
nTERMINAL INFORMATION
No. SYMBOL EXPLANATION
1 P1
RF port. This port is connected with PC port by controlling 6th pin (V
CTL(H)
) to
2.7~9.0V and 4th pin (V
CTL(L)
) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01µF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
2 GND
Ground terminal. Please connect this terminal with ground plane as close
as possible for excellent RF performance.
3 P2
RF port. This port is connected with PC port by controlling 4th pin (V
CTL(H)
) to
2.7~9.0V and 6th pin (V
CTL(L)
) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01µF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
4 V
CTL2
Control port 2. The voltage of this port controls PC to P2 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.7~5.5V) or low-state (-0.2~+0.2V). The voltage of 6th pin have
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching speed delay from 10pF~1000pF range.
5 PC
Common RF port. In order to block the DC bias voltage of internal circuit, an
external capacitor is required. (50~100MHz: 0.01uF, 0.1~0.5GHz: 1000pF,
0.5~2.5GHz: 56pF)
6 V
CTL1
Control port 1. The voltage of this port controls PC to P2 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.7–5.5V) or low-state (-0.2~+0.2V). The voltage of 4th pin have
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching speed delay from 10pF~1000pF range.
NJG1516KC3
- 5 -
nELECTRICAL CHARACTERISTICS
(f=50MHz~3.0GHz, with application circuit, losses of external circuit are excluded)
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Insertion Loss vs. Frequency
Insertion Loss (dB)
Frequency (GHz)
(VCTL1=3.0V,VCTL2=0V,Pin=0dBm)
-45
-40
-35
-30
-25
-20
-15
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(VCTL1=0V,VCTL=3.0V,Pin=0dBm)
1.0
1.5
2.0
2.5
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 VSWR vs. Frequency
PC-P1 VSWR
Frequency (GHz)
(VCTL1=3.0V,VCTL2=0V,P1 port)
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P2 Insertion Loss vs. Frequency
Insertion Loss (dB)
Frequency (GHz)
(VCTL1=0V,VCTL2=3.0V,Pin=0dBm)
-45
-40
-35
-30
-25
-20
-15
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P2 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(VCTL1=3.0V,VCTL=0V,Pin=0dBm)
1.0
1.5
2.0
2.5
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 VSWR vs. Frequency
PC-P1 VSWR
Frequency (GHz)
(VCTL1=3.0V,VCTL2=0V,PC port)
NJG1516KC3
- 6 -
nELECTRICAL CHARACTERISTICS
(f=0.8GHz, with application circuit 1 (Parts list 3), losses of PCB, DC blocking capacitor are excluded)
10
15
20
25
30
35
40
45
50
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P1,f=0.8GHz)
10
15
20
25
30
35
40
45
50
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P2,f=0.8GHz)
-30
-28
-26
-24
-22
-20
20 25 30 35 40
PC-P1 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P1,f=0.8GHz)
-30
-28
-26
-24
-22
-20
20 25 30 35 40
PC-P2 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P2,f=0.8GHz)
NJG1516KC3
- 7 -
10
15
20
25
30
35
40
45
50
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P1,f=1GHz)
10
15
20
25
30
35
40
45
50
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P2,f=1GHz)
n ELECTRICAL CHARACTERISTICS
(f=0.8GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
(f=1.0GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P1,f=0.8GHz)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P2,f=0.8GHz)
NJG1516KC3
- 8 -
nELECTRICAL CHARACTERISTICS
(f=1.0GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P1 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P1,f=1GHz)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P2 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P2,f=1GHz)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P1,f=1GHz)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P2,f=1GHz)
NJG1516KC3
- 9 -
nELECTRICAL CHARACTERISTICS
(f=1.5GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
10
15
20
25
30
35
40
45
50
-1.2
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P1,f=1.5GHz)
10
15
20
25
30
35
40
45
50
-1.2
-1.1
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P2,f=1.5GHz)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P1 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P1,f=1.5GHz)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P2 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P2,f=1.5GHz)
NJG1516KC3
- 10 -
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P1,f=1.5GHz)
10
15
20
25
30
35
40
45
50
-1.4
-1.3
-1.2
-1.1
-1
-0.9
-0.8
-0.7
-0.6
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P1,f=2GHz)
10
15
20
25
30
35
40
45
50
-1.4
-1.3
-1.2
-1.1
-1
-0.9
-0.8
-0.7
-0.6
15 20 25 30 35 40
Output Power,Insertion Loss vs. Input power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Output Power(dBm)
Insertion Loss(dB)
Input Power(dBm)
(PC-P2,f=2GHz)
nELECTRICAL CHARACTERISTICS
(f=1.5GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
(f=2.0GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P2,f=1.5GHz)
NJG1516KC3
- 11 -
nELECTRICAL CHARACTERISTICS
(f=2.0GHz, with application circuit 1 (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P1 Isoration vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P1,f=2GHz)
-30
-28
-26
-24
-22
-20
25 30 35 40
PC-P2 Isolation vs. Input Power
VDD=2.7V
VDD=3.0V
VDD=3.5V
VDD=4.0V
VDD=5.0V
VDD=6.0V
VDD=7.0V
VDD=9.0V
Isolation(dB)
Input Power(dBm)
(PC-P2,f=2GHz)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P1,f=2GHz)
0
50
100
150
200
15 20 25 30 35 40
I
CTL
vs. Input Power
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
I
CTL
(uA)
Input Power(dBm)
(PC-P2,f=2GHz)
NJG1516KC3
- 12 -
Switching speed
(V
CTL1
=3.0V, V
CTL2
=0V)
44ns
1V
-1V
10ns/div
80.2ns
-19.8ns
200mV
/div
nELECTRICAL CHARACTERISTICS (with application circuit 1, Parts list 3)
-80
-60
-40
-20
0
20
40
60
20 25 30 35 40 45 50 55 60
Output Power,IM3 vs. Input Power
IM3,Output Power(dBm)
Input Power(dBm)
Output Power
IM3
(VCTL1=2.7V,VCTL2=0V,f=900+901MHz)
IIP3=60.9dBm
(Input Power=25dBm)
-80
-60
-40
-20
0
20
40
60
20 25 30 35 40 45 50 55 60
Output Power,IM3 vs. Input Power
IM3,Output Power(dBm)
Input Power(dBm)
Output Power
IM3
(VCTL1=3V,VCTL2=0V,f=900+901MHz)
IIP3=62.5dBm
(Input Power=25dBm)
NJG1516KC3
- 13 -
nELECTRICAL CHARACTERISTICS (with application circuit 1, Parts list 3)
80
82
84
86
88
90
92
94
20 21 22 23 24 25 26 27 28
Pin-IM3 vs. Input Power
THRU
VCTL=3.5V
VCTL=3V
VCTL=2.8V
VCTL=2.7V
VCTL=2.5V
Pin-IM3 (dB)
Input Power(dBm)
(f=900+901MHz)
-70
-60
-50
-40
-30
-20
20 22 24 26 28 30
IM3 vs. Input Power
THRU
VCTL=3.5V
VCTL=3V
VCTL=2.8V
VCTL=2.7V
VCTL=2.5V
IM3(dBm)
Input Power(dBm)
(f=900+901MHz)
-80
-60
-40
-20
0
20
40
60
20 25 30 35 40 45 50 55 60
Output Power,IM3 vs. Input Power
IM3,Output Power(dBm)
Input Power(dBm)
Output Power
IM3
(VCTL1=3.5V,VCTL2=0V,f=900+901MHz)
IIP3=63.4dBm
(Input Power=25dBm)
NJG1516KC3
- 14 -
nELECTRICAL CHARACTERISTICS (with application circuit 1, Parts list 3)
-100
-95
-90
-85
-80
24 25 26 27 28 29 30
ACP vs. Input Power
Thru
VCTL=3V
VCTL=2.7V
VCTL=2.5V
ACP(dBc)
Input Power(dBm)
(f=1GHz,offset=1.98MHz)
-80
-75
-70
-65
-60
24 25 26 27 28 29 30
ACP vs. Input Power
Thru
VCTL=3V
VCTL=2.7V
VCTL=2.5V
ACP(dBc)
Input Power(dBm)
(f=1GHz,offset=0.9MHz)
-90
-80
-70
-60
-50
-40
20 25 30 35
3rd Harmonics vs. Input Power
Input 3fo Level=-110dBc
VCTL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
VCTL=4V
VCTL=5V
VCTL=6V
3rd Harmonics(dBc)
Input Power(dBm)
(f=900MHz)
-90
-85
-80
-75
-70
-65
-60
20 25 30 35
2nd Harmonics vs. Input Power
Input 2fo Level
VCTL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
VCTL=4V
VCTL=5V
VCTL=6V
2nd Harmonics(dBc)
Input Power(dBm)
(f=900MHz)
NJG1516KC3
- 15 -
nELECTRICAL CHARACTERISTICS (with application circuit 1, Parts list 3)
-95
-90
-85
-80
-75
-70
-65
-60
20 25 30 35
2nd Harmonics vs. Input Power
Input 2nd Level
VCTL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
VCTL=4V
VCTL=5V
VCTL=6V
2nd Harmonics(dBc)
Input Power(dBm)
(f=1800MHz)
-90
-80
-70
-60
-50
-40
20 25 30 35
3rd Harmonics vs. Input Power
Input 3fo Level=-100dBc
VCTL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
VCTL=4V
VCTL=5V
VCTL=6V
3rd Harmonics(dBc)
Input Power(dBm)
(f=1800MHz)
NJG1516KC3
- 16 -
n
TEMPERATURE CHARACTERISTICS (with application circuit 1, Parts list 3)
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
-50 0 50 100
Insertion Loss vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Insertion Loss (dB)
Ambient Temperature (oC)
(PC-P1,f=1GHz,Input Power=34.5dBm)
-1
-0.9
-0.8
-0.7
-0.6
-0.5
-50 0 50 100
Insertion Loss vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Insertion Loss (dB)
Ambient Temperature (oC)
(PC-P1,f=2GHz,Input Power=31.5dBm)
-28.5
-28
-27.5
-27
-26.5
-26
-50 0 50 100
Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Isolation (dB)
Ambient Temperature (oC)
(PC-P1,f=1GHz,Input Power=34.5dBm)
-26
-25.5
-25
-24.5
-24
-50 0 50 100
Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
Isolation (dB)
Ambient Temperature (oC)
(PC-P1,f=2GHz,Input Power=31.5dBm)
NJG1516KC3
- 17 -
nTEMPERATURE CHARACTERISTICS (with application circuit 1, Parts list 3)
0
50
100
150
200
250
-50 0 50 100
ICTL vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
ICTL (uA)
Ambient Temperature (oC)
(PC-P1,f=1GHz,Input Power=34.5dBm)
0
50
100
150
200
250
-50 0 50 100
ICTL vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.5V
VCTL=4.0V
VCTL=5.0V
VCTL=6.0V
VCTL=7.0V
VCTL=9.0V
ICTL (uA)
Ambient Temperature (oC)
(PC-P1,f=2GHz,Input Power=31.5dBm)
60
62
64
66
68
70
-50 0 50 100
IIP3 vs. Ambient Temperature
VTCL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
IIP3(dBm)
Ambient Temperature (oC)
Thru
(PC-P1,f=900+901MHz,Input Power=21dBm)
50
55
60
65
70
-50 0 50 100
IIP3 vs. Ambient Temperature
VTCL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
IIP3(dBm)
Ambient Temperature (oC)
Thru
(PC-P1,f=900+901MHz,Input Power=25dBm)
NJG1516KC3
- 18 -
n TEMPERATURE CHARACTERISTICS (with application circuit 1, Parts list 3)
50
55
60
65
70
-50 0 50 100
IIP3 vs. Ambient Temperature
VTCL=2.5V
VCTL=2.7V
VCTL=2.8V
VCTL=3.0V
VCTL=3.5V
IIP3(dBm)
Ambient Temperature (oC)
Thru
(PC-P1,f=900+901MHz,Input Power=28dBm)
-85
-80
-75
-70
-65
-60
-50 0 50 100
2nd Harmonics vs. Ambient Temperture
Input 2fo Level
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
2nd Harmonics(dBc)
Ambient Temperature (oC)
(f=900MHz,Input Power=25dBm)
-80
-75
-70
-65
-50 0 50 100
2nd Harmonics vs. Ambient Temperture
Input 2fo Level
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
2nd Harmonics(dBc)
Ambient Temperature (oC)
(f=900MHz,Input Power=30dBm)
NJG1516KC3
- 19 -
nTEMPERATURE CHARACTERISTICS (with application circuit 1, Parts list 3)
-90
-85
-80
-75
-70
-65
-50 0 50 100
3rd Harmonics vs. Ambient Temperture
Input 3fo Level=-110dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
3rd Harmonics(dBc)
Ambient Temperature (oC)
(f=900MHz,Input Power=25dBm)
-80
-75
-70
-65
-60
-55
-50 0 50 100
3rd Harmonics vs. Ambient Temperture
Input 3fo Level=-107dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
3rd Harmonics(dBc)
Ambient Temperature (oC)
(f=900MHz,Input Power=30dBm)
-80
-78
-76
-74
-72
-70
-50 0 50 100
2nd Harmonics vs. Ambient Temperture
Input 2fo Level=-90dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
2nd Harmonics(dBc)
Ambient Temperature (oC)
(f=1800MHz,Input Power=25dBm)
NJG1516KC3
- 20 -
nTEMPERATURE CHARACTERISTICS (with application circuit 1, Parts list 3)
-50 0 50 100
2nd Harmonics vs. Ambient Temperture
Input 2fo Level=-85dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
-75
-73
-71
-69
-67
-65
2nd Harmonics(dBc)
Ambient Temperature (oC)
(f=1800MHz,Input Power=30dBm)
-80
-75
-70
-65
-60
-55
-50 0 50 100
3rd Harmonics vs. Ambient Temperture
Input 3fo level=-111dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
3rd Harmonics(dBc)
Ambient Temperature (oC)
(f=1800MHz,Input Power=25dBm)
-70
-65
-60
-55
-50
-45
-50 0 50 100
3rd Harmonics vs. Ambient Temperture
Input 3fo Level=-104dBc
VCTL=2.5V
VCTL=2.8V
VCTL=3V
VCTL=3.5V
3rd Harmonics(dBc)
Ambient Temperature (oC)
(f=1800MHz,Input Power=30dBm)
NJG1516KC3
- 21 -
nELECTRICAL CHARACTERISTICS
(f=50MHz~3.0GHz, with application circuit 2, losses of PCB, connector and DC blocking capacitor are excluded)
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Insertion Loss vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
Insertion Loss(dB)
Frequency(GHz)
(VCTL1=3.0V,VCTL2=0V,Pin=0dBm)
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P2 Insertion Loss vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
Insertion Loss(dB)
Frequency(GHz)
(VCTL1=0V,VCTL2=3.0V,Pin=0dBm)
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Isolation vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
Isolation(dB)
Frequency(GHz)
(VCTL1=3.0V,VCTL2=0V,Pin=0dBm)
NJG1516KC3
- 22 -
nELECTRICAL CHARACTERISTICS
(f=50MHz~3.0GHz, with application circuit 2, losses of PCB, connector and DC blocking capacitor are excluded)
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P2 Isolation vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
Isolation(dB)
Frequency(GHz)
(VCTL1=0V,VCTL2=3.0V,Pin=0dBm)
1.0
1.5
2.0
2.5
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 VSWR vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
PC-P1 VSWR
Frequency(GHz)
(VCTL1=3.0V,VCTL2=0V,P1 port)
1.0
1.5
2.0
2.5
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 VSWR vs. Frequency
RECOMMENDED CIRCUIT 2
RECOMMENDED CIRCUIT 1
PC-P1 VSWR
Frequency(GHz)
(VCTL1=3.0V,VCTL2=0V,DC cut=56pF,PC port)
NJG1516KC3
- 23 -
nAPPLICATION CIRCUIT 1 (Parts list 1~3)
n
APPLICATION CIRCUIT 2 (for 2GHz or above, Parts list 4)
No. List 1 List 2 List 3 List 4
fin=50 fin=0.1 fin=0.5 fin=2.0
~100MHz ~0.5GHz ~2.0GHz ~2.5GHz
C1~C3 0.01uF 1000pF 56pF 56pF
C4, C5 10pF 10pF 10pF 10pF
C6 - - - 0.75pF
L1 - - - 2.2nH
PC
P1
V
CTL1
(3V/0V)
C1
C3
C5
C2
V
CTL2
(0V/3V)
C4
C6
P2
L1
NJG1516KC3
PC
P1
V
CTL1
(3V/0V)
C1
C3
C5
C2
V
CTL2
(0V/3V)
C4
P2
NJG1516KC3
NJG1516KC3
- 24 -
nRECOMMENDED PCB DESIGN
PRECAUTIONS
[1]The DC blocking capacitors have to be placed at RF terminal of P1, P2 and PC.
[2]Bypass capacitors (C4, C5) should be placed close to terminals of V
CTL1
, V
CTL2
to
reduce stripline influence of RF characteristics.
[3]For good isolation, the GND terminal (2nd pin) must be placed possibly close to
ground plane of substrate, and through holes for GND should be placed near by the
pin connection.
PCB: FR-4, t=0.5mm
Capacitor: size 1005
Strip Line Width=1.0mm
PCB SIZE: 14.0x19.4mm
P1
P2C1C2
C4
C5
VCTL1
C3
PC
VCTL2
(TOP VIEW)
freq[GHz] LOSS[dB]
0.8 0.11
1.0 0.13
1.5 0.16
1.8 0.20
2.0 0.22
2.5 0.26
Circuit losses including losses of capacitors and connectors
NJG1516KC3
- 25 -
n
PACKAGE OUTLINE
Lead material : Copper
Lead surface finish: Solder plating
Molding material : Epoxy resin
UNIT : mm
Weight : 14mg
3.0±0.1
6 5 4
1 2 3
0.20.2
2.8±0.1
2.4±0.1
0.95 0.95
0.15-0.05
+0.1
0.3-0.05
+0.1
0.1 0.1
0.75±0.05
Cautions on using this product
This product contains Gallium-Arsenide (GaAs) which is a harmful material.
• Do NOT eat or put into mouth.
• Do NOT dispose in fire or break up this product.
• Do NOT chemically make gas or powder with this product.
• To waste this product, please obey the relating law of your country.
This product may be damaged with electric static discharge (ESD) or spike voltage. Please
handle with care to avoid these damages.
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
Loading...