Datasheet MUSB-A511-00 Specification

Page 1

Product Update Harsh Environment USB

MUSB CONNECTOR SERIES

About Amphenol Commercial Products

Amphenol’s Commercial Connector Products are used in a variety of end user applications including Networking, Telecom, Server & Computer, Storage & HDD, Consumer Electronics and Entertainment, Professional Audio, Industrial & Military/Aerospace

With matching USB

With Cable Header

Radiation Detector Test Equipment Microwave Transmitters

With Terminal Block

Military Radio Military Vehicles Test Enclosures

With PCB for wiring

GPS Systems – Agriculture & shipping containers

Description

The design of Amphenol Canada’s harsh environment family of USB connectors represents a unique and innovative design. Our design provides the ideal solution for data transfer in harsh or demanding environments against physical and environmental conditions. This family of rugged USB are available in series A (single & stacked), series B, series mini-B and series mini AB, right angle and vertical PCB. Matching USB, cable headers, terminal blocks, all mounted on a PCB and dust covers are also additional options offered with the different USB series. These connectors meet IP67 in the mated and unmated conditions and also the Military shock and vibration levels.

Applications

MARKETS: APPLICATIONS Medical Equipment

Industrial

Military

Mobile Entertainment Systems

Automotive

Page 2

RELATED PRODUCTS Amphenol manufactures

a line of rugged RJ45, rugged D-subs and rugged bulkhead adapters, all meeting IP67. Contact your local Amphenol representative for details.

Electrical Properties

Current Rating: 1.5 Amperes Contact Resistance: 30 milliohms maximum Insulation Resistance: 1000 Mega ohm DWV: 500 V AC @ sea level

Environmental Properties

Rohs Compliant Operating Temperature: -40ºC to +105ºC Thermal Shock: 5 cycles @ -40C to +125C Humidity: Per EIA 364-31 Condition C Method III

Mechanical & Material Properties

Shell: Nickel Plated Die-cast Zinc Alloy Housing: High Temperature Thermoplastic UL94V0, Black Contacts: Phosphor Bronze, 30u˝ (0.76 microns) Gold over Nickel Physical Shock: Per EIA 364-27 Condition H (11 ms 30G)

Available Documents

Vibration: Per EIA 364-28 per Condition V, Letter A

Drawing Number: P-MUSB-XXXX-XX QTR9300377 Series Mini AB QTR9300378-A Series A QTR 9300378-B Series B

Part Number

MUSB-XXXX-XX

www.amphenolcanada.com

or www.amphenolacp.com

Page 3

MUSB CONNECTOR PRODUCT NUMBERING SYSTEM

MUSB Connector series designation - Rugged USB

STYLE A - Receptacle type A, single B - Receptacle type Mini-B, single C - Receptacle type A over type A, stacked D - Receptacle type B, single E - Receptacle type Mini-AB, single

TERMINATION 1 - Right angle pcb tail 2 - Right angle pcb tail, on pcb with right angle cable header, note 1 3 - Right angle pcb tail, on pcb with matching USB termination, note 2 4 - Right angle pcb tail, on pcb with terminal block(s), note 3 5 - Vertical pcb tail 6 - Right angle pcb tail, on pcb with MRJ & r/a cable header, note 5 8 - Right angle pcb tail, on pcb with vertical cable header, note 5 A - Right angle pcb tail, on pcb without extra connectors,note 4

B - Right angle pcb tail, on pcb vertical 5 pin one row header note 6

D - Right angle pcb tail, on pcb, vertical 2x5 dual row header note 7

NUMBER OF CONTACTS 1 - Standard 4 per port (use for styles A, C & D) 5 - Standard 5 per port (use for styles B & E)

COLOR 1 - Standard black

MUSB-C211-313

OPTIONS 0 - No rear shield; shell with Unified National thread, note 8 & 9 3 - With rear shield; shell with Unified National thread, note 8 & 9 M - With rear shield; shell with Metric thread, note 8 & 10

SPECIALS 0 - Standard (means 30u" (0.76um) gold, no dust cover) 1 - With grey color dust cover (supplied bulk packed) 3 - 50u" (1.27um) gold 5 - With black color dust cover (supplied bulk packed) 6 - Vertical with 4.6mm tail length - for MUSB-A511-06 only

UNIQUE SPECIAL CODE No Digit - Part defined by previous 10 digits 1 to 9 - Unique special feature. Consult Factory

Notes

1) Termination code 2 currently available for styles A, C & D. A 14 pin cable header is used for styles A & C. A 10 pin cable header is used for style D.

2) Termination code 3 currently available for styles A & C.

3) Termination code 4 currently available for style C using 2 x 5 position terminal blocks. Proposed for style A.

4) Termination code 6 proposed for style A only.

5) Termination code 8 proposed for style A & C

6) Termination Code B currently available for style A

7) Termination code D currently available for style C

8) Rear shield required for styles A, C, D, with right angle pcb tails. Rear shield optional for styles B & E with r/a pcb tails. No rear shield for any vertical pcb tail.

9) Unified National thread - use #4-40 UNC for st yles A, C, D, and #2-56 UNC for styles B & E.

10) Metric thread - use M3 for styles A, C, D, and M2 for styles B & E .

11) Unique special code defines the entire part. Note that code 3, for example, may have a completely different definition for every connector where it is used.

www.amphenolcanada.com

or www.amphenolacp.com