Datasheet LM393P, LM393M Datasheet (Bay Linear)

Page 1
Bay Linear
Inspire the Linear Power
Low Power Low Offset Voltage Dual
Comparators
Description
The LM393 consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common­mode voltage range includes ground, even though operated from a single power supply voltage.
Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The LM393 was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM393 will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.
Pin Connection
LM393
Features
Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ± 1.0V to ± 18V
Very low supply current drain ( 0.4 mA) independent of supply voltage
Low input biasing current: 25 nA
Low input offset current: ± 5 nA
Maximum offset voltage: ± 3 mV
Input common- mode voltage range
includes ground
Differential input voltage range equal to the power supply voltage
Low output saturation voltage,: 250 mV at 4 mA
Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems
Devices Package Temp.
LM393M SO-8 LM393P 8-DIP
0 °C to 70 °C 0 °C to 70 °C
Bay Linear, Inc
2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
Page 2
LM393
Absolute Maximum Rating
Parameter LM393 Unit
Supply Voltage 36 V Differential Input Voltage 36 Input Voltage -0.3 to 36 Input Current 50 Storage Temperature 0 to 70 Lead Temperature (solder 10 Second) 260 ESD 250 V
V V
mA
°C °C
Electrical Characteristics
(VCC = 5V; TJ=25°C , unless otherwise specified)
Bay Linear, Inc
2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
Page 3
Advance Information- These data sheets contain descriptions of products that are in development. The specifications are based on the engineering calculations, computer simulations and/ or initial prototype evaluation.
Preliminary Information- These data sheets contain minimum and maximum specifications that are based on the initial device characterizations. These limits are subject to change upon the completion of the full characterization over the specified temperature and supply voltage ranges.
The application circuit examples are only to explain the representative applications of the devices and are not intended to guarantee any circuit design or permit any industrial property right to other rights to execute. Bay Linear takes no responsibility for any problems related to any industrial property right resulting from the use of the contents shown in the data book. Typical parameters can and do vary in different applications. Customer’s technical experts must validate all operating parameters including “ Typical” for each customer application.
LIFE SUPPORT AND NUCLEAR POLICY
Bay Linear products are not authorized for and should not be used within life support systems which are intended for surgical implants into the body to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of Bay Linear President.
Bay Linear, Inc
2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
Loading...