Datasheet LE series Specification

Page 1
Terminal Code : E
(Except φ5)
Supplement code
Size code
Capacitance tolerance code
F:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 16V:160, 100V:101)
Series code
Category
1 3 42 6 7 8 9 10 31215 81716111 1514
Please refer to "Product code guide (radial lead type)"
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
LESeries
Suitable for long life products
Downsize and long life
Endurance with ripple current:10,000 hours at 105
Case size range:φ5×11L to φ8×11.5L
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS2 Compliant
SPECIFICATION
Items Characteristics
Category Temperature Range
Rated Voltage Range Capacitance Tolerance Leakage Current
Dissipation Factor (tanδ)
Low Temperature Characteristics (Max. Impedance Ratio)
Endurance
Shelf Life
-40 to +105
10 to 100V
±
I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes)
Rated voltage (V tanδ (Max.) 0.45 0.35 0.30 0.22 0.19 0.17 0.15 (at 20℃,120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 100V Z(-25℃)/Z(20℃) 8 6 4 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105℃. Capacitance change D.F. (tanδ) Leakage current The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105
without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change D.F. (tanδ) Leakage current
dc
20% (M) (at 20℃, 120Hz)
) 10V 16V 25V 35V 50V 63V 100V
dc
of the initial value
≦±25%
300% of the initial specified value
The initial specified value
25% of the initial value
≦±
300% of the initial specified value
The initial specified value
Long life forφ5 toφ8 product, 105
DIMENSIONS [mm]
Sleeve (PET : Brown)
D'
φ
L' 15min. 4min.
Vent
PART NUMBERING SYSTEM
E L E A A A E A A A A A A A A DM
Capacitance code (ex. 4.7µF:4R7, 10µF:100,100µ
d
φ
Gas escape end seal
0.5
±
F
φD φd
φD'
5
0.5
2.0
F
L'
φD+0.5max.
L+1.5max.
6.3
0.5
2.5
8
0.6
3.5
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001V 2021
Page 2
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
LESeries
STANDARD RATINGS
Long life forφ5 toφ8 product, 105
WV
(V
100
)
dc
10
16
25
35
50
63
Cap (µF)
100 5×11 0.45 130 ELE-100E□□101ME11D 220 6.3×11 0.45 210 ELE-100E□□221MF11D 330 8×11.5 0.45 330 ELE-100E□□331MHB5D
47 5×11 0.35 130 ELE-160E□□470ME11D 100 6.3×11 0.35 210 ELE-160E□□101MF11D 220 8×11.5 0.35 330 ELE-160E□□221MHB5D
33 5×11 0.30 130 ELE-250E□□330ME11D
47 5×11 0.30 130 ELE-250E□□470ME11D 100 6.3×11 0.30 210 ELE-250E□□101MF11D
33 5×11 0.22 130 ELE-350E□□330ME11D
47 6.3×11 0.22 210 ELE-350E□□470MF11D 100 8×11.5 0.22 330 ELE-350E□□101MHB5D
1.0 5×11 0.19 25 ELE-500E□□1R0ME11D
2.2 5×11 0.19 35 ELE-500E□□2R2ME11D
3.3 5×11 0.19 70 ELE-500E□□3R3ME11D
4.7 5×11 0.19 80 ELE-500E□□4R7ME11D 10 5×11 0.19 90 ELE-500E□□100ME11D 22 5×11 0.19 110 ELE-500E□□220ME11D 33 6.3×11 0.19 190 ELE-500E□□330MF11D 47 6.3×11 0.19 190 ELE-500E□□470MF11D
100 8×11.5 0.19 270 ELE-500E□□101MHB5D
10 5×11 0.17 80 ELE-630E□□100ME11D 22 6.3×11 0.17 170 ELE-630E□□220MF11D 33 6.3×11 0.17 170 ELE-630E□□330MF11D 47 8×11.5 0.17 240 ELE-630E□□470MHB5D
1.0 5×11 0.15 40 ELE-101E□□1R0ME11D
2.2 5×11 0.15 50 ELE-101E□□2R2ME11D
3.3 5×11 0.15 60 ELE-101E□□3R3ME11D
4.7 5×11 0.15 70 ELE-101E□□4R7ME11D 10 6.3×11 0.15 150 ELE-101E□□100MF11D 22 8×11.5 0.15 230 ELE-101E□□220MHB5D
Case size
L(mm)
φD×
□□ : Enter the appropriate lead forming or taping code.
tan
δ
Rated ripple current
(mArms/105℃, 100kHz)
Part No.
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Capacitance(µF)
Frequency(Hz)
1.0 to 10 0.42 0.60 0.80 1.00 22 to 33 0.55 0.75 0.90 1.00 47 to 330 0.70 0.85 0.95 1.00
120 1k 10k 100k
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001V 2021
Loading...