Datasheet IR2136, IR21362, IR21363, IR21365, IR21366 Datasheet (IOR)

Data Sheet No. PD60166 revS

IR2136/IR21362/IR21363/IR21365/

IR21366/IR21367/IR21368 (J&S) & (PbF)

Features

Floating channel designed for bootstrap operation

•

Fully operational to +600V

3-PHASE BRIDGE DRIVER

Packages

Tolerant to negative transient voltage - dV/dt immune
Gate drive supply range from 10 to 20V (IR2136/IR21368),

•

11.5 to 20V (IR21362) or 12 to 20V (IR21363/IR21365/
IR21366/IR21367)
Undervoltage lockout for all channels

•

Over-current shutdown turns off all six drivers

•

Independent 3 half-bridge drivers

•

Matched propagation delay for all channels

•

Cross-conduction prevention logic

•

Lowside outputs out of phase with inputs. High side

•

outputs out of phase (IR2136/IR21363/IR21365/
IR21366/IR21367/IR21368) or in phase
(IR21362) with inputs.

3.3V logic compatible

•

Lower di/dt gate driver for

•

better noise immunity
Externally programmable

•

delay for automatic fault
clear
Also available LEAD-FREE

•

Description

Part

Input Logic
Ton (typ.)
Toff (typ.)
VIH (typ.)
VIL (typ.)
Vitrip+
UV CC/BS+
UV CC/BS-

IR2136

HIN, LIN
400ns
380ns

2.7V

1.7V

0.46V

8.9V

8.2V

Feature Comparison: IR2136/IR21362/IR21363/

IR21362

HIN/LIN
400ns
380ns

2.7V

1.7V

0.46V

10.4V

9.4V

28-Lead SOIC

28-Lead PDIP

44-Lead PLCC w/o 12 leads

IR21365/IR21366/IR21367/IR21368

IR21363

HIN, LIN
400ns
380ns

2.7V

1.7V

0.46V

11.2V

11.0V

IR21365

HIN, LIN
400ns
380ns

2.7V

1.7V

4.3V

11.2V

11.0V

IR21366

HIN, LIN
250ns
180ns

2.0V

1.3V

0.46V

11.2V

11.0V

IR21367

HIN, LIN
250ns
180ns

2.0V

1.3V

4.3V

11.2V

11.0V

IR21368

HIN,LIN
400ns
380ns

2.0V

1.3V

4.3V

8.9V

8.2V

The IR2136/IR21362/IR21363/IR21365/IR21366/IR21367/IR21368(J&S) are high votage, high speed power MOSFET
and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications.
Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS
or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from
an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An
open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred.
Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network
connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum
driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The
floating channel can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which
operates up to 600 volts.

Typical Connection

HIN1,2,3 / HIN1,2,3

(Refer to Lead Assign­ments for correct pin con­figuration). This/These
diagram(s) show electri­cal connections only.
Please refer to our Appli­cation Notes and
DesignTips for proper cir­cuit board layout.

VCC

LIN1,2,3

FAULT

GND

VCC

HIN1,2,3 / HIN1,2,3

LIN1,2,3

EN

FAULT

EN

RCIN

ITRIP

VSS COM

VB1,2,3

HO1,2,3

VS1,2,3

LO1,2,3

IR2136(2)(3)(5)(6)(7)(8)

up to 600V

TO

LOAD

www.irf.com 1

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters
are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board
mounted and still air conditions.

Symbol Definition Min. Max. Units

V

S

V

BS

V

HO

V

CC

V

SS

V

LO1,2,3

V

IN

V

FLT

dV/dt Allowable offset voltage slew rate — 50 V/ns

P

D

Rth

JA

T

J

T

S

T

L

High side offset voltage V

B1,2,3

- 25 V

B1,2,3

+ 0.3
High side floating supply voltage -0.3 625
High side floating output voltage V

S1,2,3

- 0.3 V

B1,2,3

+ 0.3
Low side and logic fixed supply voltage -0.3 25
Logic ground V

- 25 V

CC

CC

+ 0.3
Low side output voltage -0.3 VCC + 0.3
Input voltage LIN,HIN,ITRIP, EN, RCIN VSS - 0.3 lower of

(V

+ 15) or

SS

V

+ 0.3)

CC

FAULT output voltage VSS - 0.3 V

Package power dissipation @ T

≤ +25°C (28 lead PDIP) — 1.5

A

CC

+ 0.3

(28 lead SOIC) — 1.6

(44leadPLCC) — 2.0

Thermal resistance, junction to ambient (28 lead PDIP) — 83

(28 lead SOIC) — 78

(44 lead PLCC) — 63
Junction temperature — 150
Storage temperature -55 150
Lead temperature (soldering, 10 seconds) — 300

V

W

°C/W

°C

Recommended Operating Conditions

The Input/Output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recom­mended conditions. All voltage parameters are absolute referenced to COM. The VS offset rating is tested with all supplies
biased at 15V differential.

Symbol Definition Min. Max. Units

V

B1,2,3

V

S1,2,3

V

HO1,2,3

V

LO1,2,3

V

CC

V

SS

V

FLT

V

RCIN

Note 1: Logic operational for VS of COM -5V to COM +600V. Logic state held for VS of COM -5V to COM -VBS.
(Please refer to the Design Tip DT97-3 for more details).
Note 2: All input pins and the ITRIP pin are internally clamped with a 5.2V zener diode.

2 www.irf.com

High side floating supply voltage IR2136(8) V

IR21362 V
IR2136(3)(5)(6)(7) V

S1,2,3

S1,2,3

S1,2,3

10 V

+

11.5 V

+

12 V

+

S1,2,3

S1,2,3

S1,2,3

High side floating supply offset voltage Note 1 600
High side output voltage V

S1,2,3

Low side output voltage 0 V

V

B1,2,3

CC

Low side and logic fixed supply voltage IR2136(8) 10 20

IR21362 11.5 20

IR2136(3)(5)(6)(7) 12 20
Logic ground -5 5
FAULT output voltage V
RCIN input voltage V

SS

SS

V

CC

V

CC

20

+

20

+

20

+

V

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

Recommended Operating Conditions cont.

The Input/Output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recom­mended conditions. All voltage parameters are absolute referenced to COM. The VS offset rating is tested with all supplies
biased at 15V differential.

Symbol Definition Min. Max. Units

V

ITRIP

V

IN

T

A

Note 2: All input pins and the ITRIP pin are internally clamped with a 5.2V zener diode.

ITRIP input voltage V
Logic input voltage , HIN (IR2136,IR21363(5)(6)(7)(8)),

HIN(IR21362), EN V

Ambient temperature -40 125

SS

SS

V

SS

V

SS

+5

+5

V

o

C

Static Electrical Characteristics

V

BIAS (VCC

are applicable to all six channels (HS1,2,3 and LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3
and are applicable to the respective output leads: H

Symbol Definition Min. Typ. Max. Units Test Conditions

V

V

V

V

V

RCIN,TH+

V

RCIN,HYS

V

V

, VBS1,2,3) = 15V unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and

V

IH

V

EN,TH+

EN,TH-

IT,TH+

IT,HYS

V

OH

V

OL

CCUV+VCC

BSUV+

Logic “0” input voltage LIN1,2,3, HIN1,2,3

Logic “1” input voltage HIN1,2,3 IR21362

Logic “0” input voltage LIN1,2,3, HIN1,2,3

IR21366(7)(8) 2.5 — —

Logic “1” input voltage LIN1,2,3, HIN1,2,3

IL

Logic “0” input voltage HIN1,2,3 IR21362

Logic “0” input voltage LIN1,2,3, HIN1,2,3

IR21366(7)(8) — — 0.8

EN positive going threshold — — 3

EN negative going threshold 0.8 — —
ITRIP positive going threshold

ITRIP input hysteresis

RCIN positive going threshold — 8 —

RCIN input hysteresis — 3 —

High level output voltage, V

Low level output voltage, V

positive going threshold IR21362 9.6 10.4 11.2

and L

O1,2,3

IR2136(3)(5) 3.0 — —

IR2136(3)(5) — — 0.8

IR2136(2)(3)(6) 0.37 0.46 0.55

IR21365(7)(8) 3.85 4.30 4.75

IR2136(2)(3)(6) — 0.07 —

IR21365(7)(8) — .15 —

- V

BIAS

O

O

and VBS supply undervoltage IR2136(8) 8.0 8.9 9.8

IR21363(5)(6)(7) 10.6 11.1 11.6

O1,2,3.

— 0.9 1.4 IO = 20 mA

— 0.4 0.6 IO = 20 mA

V

)

www.irf.com 3

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

Static Electrical Characteristics cont.

V

BIAS (VCC

are applicable to all six channels (HS1,2,3 and LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3
and are applicable to the respective output leads: H

Symbol Definition Min. Typ. Max. Units Test Conditions

V

V

V

V

V

IN, CLAMP Input clamp voltage (HIN, LIN, ITRIP and EN)

I

I

R

ON,RCIN

R

, VBS1,2,3) = 15V unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and

and L

CCUV-

BSUV-

CCUVH

BSUVH

I

LK

I

QBS

I

QCC

I

LIN+

I

LIN-

I

HIN+

I

HIN-

ITRIP+

ITRIP-

I

EN+

I

EN-

I

RCIN

I

O+

I

O-

ON,FLT

O1,2,3

V

and V

CC

negative going threshold IR21362 8.6 9.4 10.2

V

and VBS supply undervoltage IR2136 0.3 0.7 —

CC

lockout hysteresis IR21362 0.5 1.0 —

Offset supply leakage current — — 50 V

Quiescent VBS supply current — 70 120

Quiescent VCC supply current — 1.6 2.3 mA

Input bias current (LOUT = HI) IR2136(2)(3)(5) — 200 300 V

Input bias current (LOUT = LO) IR2136(2)(3)(5) — 100 220 V

Input bias current (HOUT = HI) IR2136(3)(5) — 200 300 V

Input bias current (HOUT = LO) IR2136(3)(5) — 100 220 V

“high” ITRIP input bias current — 30 100 V

“low” ITRIP input bias current — 0 1 V

“high” ENABLE input bias current — 30 100 V

“low” ENABLE input bias current — 0 1 V

RCIN input bias current — 0 1 V

Output high short circuit pulsed current 120 200 — V

Output low short circuit pulsed current 250 350 — V

RCIN low on resistance — 50 100

FAULT low on resistance — 50 100

supply undervoltage IR2136(8) 7.4 8.2 9.0

BS

IR21363(5)(6)(7) 10.4 10.9 11.4

IR21363(5) — 0.2 —

IR21366(7)(8)

IR21366(7)(8)

IR21366(7)(8)

IR21362(6)(7)(8)

O1,2,3.

IR21362

V

µA

4.9 5.2 5.5 V I

—01

—01

— 30 100

—01

—01

µA

mA

Ω

B1,2,3=VS1,2,3=600V

V

= 0V or 5V

IN

IN =100µA

LIN = 5V

LIN = 0V

HIN = 5V

HIN = 0V

= 5V

ITRIP

= 0V

ITRIP

= 5V

ENABLE

= 0V

ENABLE

= 0V or 15V

RCIN

=0V, PW ≤ 10 µs

O

=15V, PW ≤10 µs

O

4 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

Dynamic Electrical Characteristics

VCC = VBS = V

Symbol Definition Min. Typ. Max. Units Test Conditions

t

on

t

off

t

r

t

f

t

EN

t

ITRIP

t

bl

t

FLT

t

FILIN

t

FLTCLR

DT Deadtime 220 290 360 VIN = 0 & 5V

MT Matching delay ON and OFF — 40 75

MDT Matching delay, max (ton,t

PM Output pulse width matching, PWin -PWout (fig.2) — 40 75

NOTE: For high side PWM, HIN pulse width must be ≥ 1µsec

= 15V, V

BIAS

Turn-on propagation delay IR2136(2)(3)(5)(8) 300 425 550

Turn-off propagation delay IR2136(2)(3)(5)(8) 250 400 550

Turn-on rise time — 125 190

Turn-off fall time — 50 75

ENABLE low to output IR2136(2)(3)(5)(8) 300 450 600 V

shutdown propagation delay IR21366(7) 100 250 400

ITRIP to output shutdown propagation delay 500 750 1000 V

ITRIP blanking time 100 150 — VIN = 0V or 5V

ITRIP to FAULT propagation delay 400 600 800 V

Input filter time (HIN, LIN, EN) 100 200 — VIN = 0 & 5V

(IR2136(2)(3)(5)(8) only)

FAULT clear time RCIN: R=2meg, C=1nF 1.3 1.65 2 mS V

(ton,toff are applicable to all 3 channels)

= VSS = COM, TA = 25oC and CL = 1000 pF unless otherwise specified.

S1,2,3

IR21366(7) — 250 —

IR21366(7) — 180 —

) - min (ton,t

off

), — 25 70

off

nS

nS

VIN = 0 & 5V

= 0V or 5V

IN, VEN

= 5V

ITRIP

V

= 5V

ITRIP

= 0V or 5V

IN

V

= 5V

ITRIP

= 0V or 5V

IN

V

= 0V

ITRIP

External dead

time

>400nsec

)

VCC VBS ITRIP ENABLE FAULT LO1,2,3 HO1,2,3

<UVCC X X X 0 (note 1) 0 0

15V <UVBS 0V 5V high imp LIN1,2,3 0

15V 15V 0V 5V high imp LIN1,2,3 HIN1,2,3

15V 15V >V

ITRIP

5V 0 (note 2) 0 0

15V 15V 0V 0V high imp 0 0

Note: A shoot-through prevention logic prevents LO1,2,3 and HO1,2,3 for each channel from turning on simultaneously.
Note 1: UVCC is not latched, when VCC>UVCC, FAULT returns to high impedance.
Note 2: When ITRIP <V

www.irf.com 5

, FAULT returns to high-impedance after RCIN pin becomes greater than 8V (@ VCC = 15V)

ITRIP

IR2136(2)(3)(5)(6)(7)(8)

Functional Block Diagram

(

J& S) & (PbF

)

HIN1

LIN1

HIN2

LIN2

HIN3

LIN3

VSS

ITRIP

RCIN

FAULT

EN

+

-

0.5V

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE
FILTER

DEADTIME &

SHOOT-THROUGH

PREVENTION

DEADTIME &

SHOOT-THROUGH

PREVENTION

DEADTIME &

SHOOT-THROUGH

PREVENTION

UV

DETECT

S

SET

DOMINANT

R

LATCH

IR2136/21363/21365

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

Q

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

SET

RESET

SET

RESET

SET

RESET

DELAY

DELAY

DELAY

LATCH

UV

DETECT

LATCH

UV

DETECT

LATCH

UV

DETECT

DRIVER

DRIVER

DRIVER

DRIVER

DRIVER

DRIVER

VB1

HO1

VS1

VB2

HO2

VS2

VB3

HO3

VS3

VCC

LO1

LO2

LO3

COM

6 www.irf.com

Functional Block Diagram

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

HIN1

LIN1

HIN2

LIN2

HIN3

LIN3

VSS

ITRIP

RCIN

FAULT

EN

+

-

0.5V

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

INPUT
NOISE

FILTER

DEADTIME &

SHOOT-THROUGH

PREVENTION

DEADTIME &

SHOOT-THROUGH

PREVENTION

DEADTIME &

SHOOT-THROUGH

PREVENTION

DETECT

S

SET

DOMINANT

R

LATCH

UV

Q

IR21362

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

RESET

RESET

RESET

DELAY

DELAY

DELAY

SET

LATCH

UV

DETECT

DRIVER

HO1

VS1

VB2

VB1

SET

LATCH

UV

DETECT

DRIVER

HO2

VS2

VB3

SET

LATCH

UV

DETECT

DRIVER

HO3

VS3

VCC

DRIVER

DRIVER

DRIVER

LO1

LO2

LO3

COM

www.irf.com 7

IR2136(2)(3)(5)(6)(7)(8)

Functional Black Diagram

(

J& S) & (PbF

)

HIN1

LIN1

HIN2

LIN2

HIN3

LIN3

VSS

EN

ITRIP

RCIN

FAULT

IR21366/IR21367/IR21368

DEADTIME &

SHOOT-THROUGH

PREVENTION

VSS/COM

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

SET

RESET

LATCH

UV

DETECT

DRIVER

VB1

HO1

VS1

VB2

SET

DEADTIME &

SHOOT-THROUGH

PREVENTION

VSS/COM

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

RESET

LATCH

UV

DETECT

DRIVER

HO2

VS2

VB3

SET

DEADTIME &

SHOOT-THROUGH

PREVENTION

VSS/COM

LEVEL

SHIFTER

HV

LEVEL

SHIFTER

RESET

LATCH

UV

DETECT

DRIVER

HO3

VS3

VCC

S

DOMINANT

R

DETECT

SET

LATCH

UV

Q

INPUT
NOISE

FILTER

+

-

INPUT
NOISE

FILTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

VSS/COM

LEVEL

SHIFTER

DELAY

DELAY

DELAY

DRIVER

DRIVER

DRIVER

LO1

LO2

LO3

COM

8 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

Lead Definitions

Symbol Description

V

CC

VSS Logic Ground

HIN1,2,3 Logic inputs for high side gate driver outputs (HO1,2,3), out of phase (IR2136/IR21363(5)(6)(7)(8)
HIN1,2,3 Logic inputs for high side gate driver outputs (HO1,2,3), in phase (IR21362)

LIN1,2,3 Logic inputs for low side gate driver outputs (LO1,2,3), out of phase
FAULT Indicates over-current (ITRIP) or low-side undervoltage lockout has occured. Negative logic,

EN Logic input to enable I/O functionality. Positive logic, i.e. I/O logic functions when ENABLE is

ITRIP Analog input for overcurrent shutdown. When active, ITRIP shuts down outputs and activates

RCIN External RC network input used to define FAULT CLEAR delay, T

COM Low side gate driver return

VB1,2,3 High side floating supply

HO1,2,3 High side gate driver outputs

V

S1,2,3

LO1,2,3 Low side gate driver output

Low side and logic fixed supply

open-drain output

high. No effect on FAULT and not latched

FAULT and RCIN low. When ITRIP becomes inactive, FAULT stays active low for an externally
set time T

to R*C. When RCIN>8V, the FAULT pin goes back into open-drain high-impedance

High voltage floating supply returns

, then automatically becomes inactive (open-drain high impedance).

FLTCLR

FLTCLR

, approximately equal

)

Note: All input pins and the ITRIP pin are internally clamped with a 5.2V zener diode.

www.irf.com 9

IR2136(2)(3)(5)(6)(7)(8)

Lead Assignments

(

J& S) & (PbF

)

1

VCC

2

HIN1

3

HIN2

4

HIN3

5

LIN1

6

LIN2

7

LIN3

FAULT

ITRIP

EN

RCIN

VSS

COM

LO3

IR2136

8

9

10

11

12

13

14

VB1

HO1

VS1

VB2

HO2

VS2

VB3

HO3

VS3

LO1

LO2

28

27

26

25

24

23

22

21

20

19

18

17

16

15

LIN1

LIN2

LIN3

FAULT

ITRIP

RCIN

7

8

9

10

11

12

13

14

15

16

EN

17

18

VCC

HIN1

HIN2

HIN3

44 LEAD PLCC w/o 12 LEADS

IR2136

19 20 21 22 23 24 25

COM

LO3

VSS

VS1

HO1

VB1

41

42433456

37

VB2

36

HO2

35

VS2

31

VB3

30

HO3

29

VS3

LO2

LO1

1

VCC

2

HIN1

3

HIN2

4

HIN3

5

LIN1

6

LIN2

7

LIN3

FAULT

ITRIP

EN

RCIN

VSS

COM

LO3

IR2136

8

9

10

11

12

13

14

VB1

HO1

VS1

VB2

HO2

VS2

VB3

HO3

VS3

LO1

LO2

28

27

26

25

24

23

22

21

20

19

18

17

16

15

28 Lead PDIP 44 Lead PLCC w/o 12 leads 28 lead SOIC (wide body)

IR2136/IR21363(5)(6)(7)(8) IR2136/IR21363(5)(6)(7)(8) (J) IR2136/IR21363(5)(6)(7)(8) (S)

VS1

HO1

LO3

LO2

VB1

LO1

1

42433456

37

VB2

36

HO2

35

VS2

31

VB3

30

HO3

29

VS3

2

HIN1

3

HIN2

4

HIN3

5

LIN1

6

LIN2

7

LIN3

8

FAULT

9

ITRIP

10

EN

11

RCIN

12

VSS

13

COM

14

LO3

41

VCC

VB1

HO1

VS1

VB2

HO2

VS2

VB3

HO3

VS3

LO1

LO2

VCC

HIN1

HIN2

LIN1

LIN2

LIN3

HIN3

7

8

9

10

11

12

13

14

15

16

EN

17

18

19 20 21 22 23 24 25

VSS

COM

1

VCC

2

HIN1

3

HIN2

4

HIN3

5

LIN1

6

LIN2

7

LIN3

8

FAULT

9

ITRIP

10

EN

11

RCIN

12

VSS

13

COM

14

LO3

VB1

HO1

VS1

VB2

HO2

VS2

VB3

HO3

VS3

LO1

LO2

28

27

26

25

24

23

22

21

20

19

18

17

16

15

FAULT

ITRIP

RCIN

28

27

26

25

24

23

22

21

20

19

18

17

16

15

28 Lead PDIP 44 Lead PLCC w/o 12 leads 28 lead SOIC (wide body)

IR21362 IR21362J IR21362S

10 www.irf.com

HIN1,2,3

HIN1,2,3

LIN1,2,3

FAULT

ITRIP

RCIN

EN

HO1,2,3

LO1,2,3

IR2136(2)(3)(5)(6)(7)(8)

Figure 1. Input/Output Timing Diagram

(

J&S) & (PbF

)

LIN1,2,3

HIN1,2,3

LIN1,2,3

HIN1,2,3

HO1,2,3

LO1,2,3

Figure 2. Switching Time Waveforms

50% 50%

PW

IN

50% 50%

ton tr tftoff

PW

OUT

90%

50%

EN

ten

HO1,2,3

90%

LO1,2,3

90%

10%10%

Figure 3. Output Enable Timing Waveform

www.irf.com 11

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

LIN1,2,3

HIN1,2,3

LIN1,2,3

HIN1,2,3

LO1,2,3

HO1,2,3

50% 50%

50% 50%

50% 50%

DT DT

50% 50%

Figure 4. Internal Deadtime Timing Waveforms

RCIN

ITRIP

FAULT

50%

tflt

50%

50%

Vrcin,th+

50%

Any

output

90%

titrip

tfltclr

Figure 5. ITRIP/RCIN Timing Waveforms

HIN/LIN

on

t

in,fil

on on off

offoff

t

in,fil

U

high

HO/LO

Figure 5.5 Input Filter Function

low

12 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

pply

)

p

(

J&S) & (PbF

)

1000

800

600

Max.

Typ.

400

Min.

200

Turn-on Propagation Delay (ns)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 6A. Turn-on Pr opagation Delay vs.

Temperature

1000

800

Max.

600

Typ.

400

Min.

200

Turn-on Propagation Delay (ns

0

3 3.5 4 4.5 5

Input Voltage (V )

Figure 6C. Turn-on Propagat ion Delay vs.

ut Voltage

In

1000

800

Max.

600

Typ.

400

Min.

200

Turn-on Propagation Delay (ns)

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 6B. Turn-on Propagation Delay vs.

Voltage

Su

1000

800

600

Max.

Typ.

400

Min.

200

Turn-off Propagation Delay (ns)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 7A. Turn-off Propagation Delay vs.

Temperatur e

www.irf.com 13

IR2136(2)(3)(5)(6)(7)(8)

)

p

)

)

(

J& S) & (PbF

)

1000

800

Max.

600

Typ.

400

Min.

200

Turn-off Propagation Delay (ns)

0

10 12 14 16 18 20

Supply Volt age (V)

Figure 7B. Turn-off Propagation Delay vs.

Supply Voltage

400

300

1000

800

Max.

600

Typ.

400

Min.

200

Turn-off Propagation Delay (ns

0

3 3.5 4 4.5 5

Input Voltage (V)

Figure 7C. Turn-off Propagation Delay vs.

ut Voltage

In

400

300

Max.

200

Max.

100

Turn-on Rise Time (ns

Typ.

0

-50-250255075100125

Temperature (

o

C)

Figure 8A. Turn-on Rise Time vs. Temperature

14 www.irf.com

200

Typ.

Turn-on Rise Time (ns

100

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 8B. Tur n-on Rise Time vs. Supply Voltage

IR2136(2)(3)(5)(6)(7)(8)

)

pply

(

J&S) & (PbF

)

200

150

100

Max.

Turn-off Fall Time (ns)

50

Typ.

0

-50-25 0 255075100125

Temperature (oC)

Figure 9A. Turn-off Fall Time vs. Temperature

1000

800

600

Max.

Typ.

400

Min.

200

EN to Output Shutdown Time (ns)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 10A. EN to Output Shutdown Time

vs. Temperature

200

150

100

Max.

Typ.

Turn-off Fall Time (ns

50

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 9B. Turn-off Fall Time vs. Supply Voltage

1000

800

Max.

600

Typ.

400

Min.

200

EN to Output Shutdown Time (ns)

0

10 12 14 16 18 20

Supply Volt age (V)

Figure 10B. EN to Output Shutdown Time vs.

Voltage

Su

www.irf.com 15

IR2136(2)(3)(5)(6)(7)(8)

g

)

(

J& S) & (PbF

)

1000

800

Max.

600

Typ.

400

Min.

200

EN to Output Shutdown Time (ns)

0

3 3.5 4 4.5 5

EN Voltage (V)

Figure 10C. EN to Output Shutdown Time

vs. EN Volta

e

1500

1200

Max.

900

Typ.

Min.

600

300

0

ITRIP to Output Shutdown Time (ns

10 12 14 16 18 20

Supply Volt age (V)

Figure 11B. ITRIP to Output Shutdown

Time vs. Supply Voltage

1500

1200

Max.

900

Typ.

600

Min.

300

ITRIP to Output Shutdown Time (ns)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 11A. ITRIP to Output Shutdown Time vs.

Temperatur e

1200

1000

Max.

800

Typ.

600

Min.

400

200

ITRIP to FAULT Indication Time (ns)

0

-50-250 255075100125

Temperature (

o

C)

Figure 12A. ITRIP to FAULT Indication Time vs.

Temperature

16 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

pply

(

J&S) & (PbF

)

1200

1000

Max.

800

Typ.

600

Min.

400

Fault Indication Time (ns)

200

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 12B. ITRIP to FAULT Indication Time vs.

Su

Voltage

3.0

2.5

Max.

2.0

Typ.

1.5

Min.

Fault Clear Time (ms)

1.0

3.0

2.5

Max.

2.0

Typ.

1.5

Min.

FAULT Clear Time (ms)

1.0

0.5

-50 -25 0 25 50 75 100 125

Temperat ure (oC)

Fig13A. FAULT Clear Time vs. Temperature

600

500

400

Max.

300

Typ.

Min.

200

Dead Time (ns)

100

0.5

10 12 14 16 18 20

Supply Voltage (V )

Figure 13B. FAULT Clear Time vs. Supply Voltage

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 14A. Dead Time vs. Temperature

www.irf.com 17

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

600

500

Max.

400

Typ.

300

Min.

Dead Time (ns)

200

100

0

10 12 14 16 18 20

Supply Voltage (V )

Figure 14B. Dead Time Time vs. Supply Voltage

6

5

4

Max.

3

6

5

4

Max.

3

2

1

Logic "0" Input Threshold (V)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 15A. Logic "0" Input Threshold vs.

Temperatur e

6

5

4

3

2

Logic "0" Input Threshold (V)

1

0

10 12 14 16 18 20

Supply Voltage (V )

Figure 15B. Logic "0" Input Threshold vs.

Supply Voltage

2

Min.

1

Logic "1" Input Threshold (V)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 16A. Logic "1" Input Threshold vs.

Temperature

18 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

pply

V

0

V

V

(

J&S) & (PbF

)

6

5

4

3

2

Min.

Logic "1" Input Threshold (V)

1

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 16B. Logic "1" Input Threshold vs.

Su

Voltage

800

700

600

M ax.

500

Typ.

Min.

400

800

700

600

Max.

500

Typ.

Min.

400

300

ITRIP Positive Going Threshold (m

200

-50 -25 0 25 50 75 100 125

o

Temperature (

C)

Figure 17A. ITRIP Positive Going Threshold vs.

Temperature (IR2136/21362/21363/ IR21366 Only)

5.5

5.0

M ax.

4.5

Typ.

4.0

Min.

300

200

ITRIP Positive Going Threshold (m

10 12 14 16 18 2

Supply Voltage (V)

Figure 17B. ITRIP Positive Going Threshold vs.

Supply Voltage (IR2136/21362/21363/IR21366 Only)

3.5

ITRIP Positive Going Threshold (

3.0

-50 -25 0 25 50 75 100 125

o

Temperat ure (

C)

Figure 17C. ITRIP Positive Going Threshold vs.

Temperature (IR21365/IR21367/IR21368 Only)

www.irf.com 19

IR2136(2)(3)(5)(6)(7)(8)

V

(

J& S) & (PbF

)

5.5

5.0

Max.

4.5

Typ.

Min.

4.0

3.5

ITRIP Positive Going Threshold (

3.0

12 14 16 18 20

Supply Voltage (V)

Figure 17D. ITRIP Positive Going Threshold vs.
Supply Voltage (IR21365/IR21367/IR21368 Only)

3.0

2.5

2.0

Max.

1.5

Typ.

1.0

0.5

High Level Output Voltage (V)

0.0

10 12 14 16 18 20

Supply Voltage (V)

Figure 18B. High Level Output vs. Supply Voltage

3.0

2.5

2.0

1.5

Max.

1.0

Typ.

0.5

High Level Output Voltage (V)

0.0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 18A. High Level Output vs. Temperature

1.2

1.0

0.8

0.6

Max.

0.4

Typ.

0.2

Low Level Output Voltage (V)

0.0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 19A. Low Level Output vs. Temperature

20 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

V

.

(

J&S) & (PbF

)

1.2

1.0

0.8

Max.

0.6

0.4

Typ.

0.2

Low Level Output Voltage (V)

0.0
10 12 14 16 18 20

Supply V oltage (V )

Figure 19B. Low Level Output vs. Supply Voltage

12

11

Max

10

Typ.

9

Min.

8

Undervoltage Lockout (+) (

BS

7

or V

-50 -25 0 25 50 75 100 125

CC

V

Temperature (

o

C)

Figur e 20. VCC or VBS Undervoltage (+)

vs. Te m pe r ature (IR2136/IR21368 Only)

11

10

Max.

9

Typ.

8

Min.

Undervoltage Lockout (-) (V)

BS

7

or V

CC

6

V

-50-25 0 25 50 75100125

Temperature (

o

C)

Figure 21. VCC or VBS Undervoltage (-)

vs. Temperature (IR2136/IR21368 Only)

13

12

Max.

11

Typ.

10

Min.

Undervoltage Lockout (+) (V)

BS

9

or V

CC

8

V

-50-25 0 255075100125

Temperature (

o

C)

Figure 22. VCC or VBS Undervoltage (+) vs.

Temperature (IR21362 Only)

www.irf.com 21

IR2136(2)(3)(5)(6)(7)(8)

)

(

y)

5

.

(

J& S) & (PbF

)

12

11

Max.

10

Typ.

9

Min.

Undervoltage Lockout (-) (V

BS

8

or V

CC

V

7

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 23. VCC or VBS Undervoltage (-) vs.

Temperat ure

IR21362 Onl

13

12

Max.

11

Typ

Min.

10

Undervoltage Lockout (-) (V)

BS

9

or V

-50 -25 0 25 50 75 100 12

CC

V

Temperature (oC)

Figure 25. VCC or VBS Undervoltage (-) vs.

Te mperature (IR21363/21365/IR21366/IR21367 Only)

13

12

M ax.

Typ.

11

Undervoltage Lockout (+) (V)

BS

or V

CC

V

Min.

10

-50 -25 0 25 50 75 100 125

Temperatur e (

o

C)

Fig u r e 24. VCC or VBS Undervoltage (+) vs.

Te m pe rature (IR21363/21365/IR21366/IR21367 Only)

500

A)

µ

400

300

200

100

Max.

Offset Supply Leakage Current (

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 26A. Offset Supply Leakage Current vs.

Temperature

22 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

500

400

300

200

100

Max.

Offset Supply Leakage Current ( A)

0

100 200 300 400 500 600

V

Boost Voltage (V)

B

Figure 26B. Offset Supply Leakage Current vs.

Boost Voltage

V

250

200

150

250

200

A)

µ

150

Max.

100

Supply Current (

BS

V

50

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 27A. VBS Supply Current vs. Temperature

5

4

3

100

Max.

Supply Current ( A)

BS

V

50

Typ.

0

10 12 14 16 18 20

V

Float ing Supply Volt age (V)

BS

Figure 27B. VBS Supply Current vs.

V

Floating Supply Voltage

BS

2

Max.

Supply Current (mA)

CC

1

V

Typ.

0

-50-25 0 255075100125

o

Temperature (

C)

Figure 28A. VCC Supply Current vs. Temperature

www.irf.com 23

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

5

4

3

2

Max.

Supply Current (mA)

CC

V

1

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 28B. VCC Supply Current vs.

V

Supply Voltage

CC

800

600

800

A)

µ

600

400

Max.

200

Logic "1" Input Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 29A. Logic "1" Input Current vs. Temperat ure

(IR2136/21363/21365 and IR21362 Low Side Only)

300

250

A)

µ

200

400

Max.

200

Logic "1" Input Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Vol tage (V)

Figure 29B. Logic "1" Input Cur rent vs. Supply Voltage

(IR2136/21363/21365 and IR21362 Low Side Only)

150

Max.

100

50

Logic "1" Input Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 29C. Logic "1" Input Current vs.

Temperature (IR21362 High Side Only)

24 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

300

250

200

150

Max.

100

Logic "1" Input Current ( A)

50

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 29D. Logic "1" Input Current vs.

Supply Volt age (IR21362 High Side Only)

600

500

400

600

500

A)

µ

400

300

200

Max.

100

Logic "0" Input Current (

0

-50 -25 0 25 50 75 100 125

Typ.

Temperature (

o

C)

Figure 30A. Logic "0" Input Current vs. Temperature

(IR2136/21363/21365 and IR21362 Low Side Only)

4

A)

µ

3

300

200

Max.

100

Logic "0" Input Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 30B. Logic "0" Input Current vs. Supply

Voltage (IR2136/ 21363/21365 a nd IR21362 Low Side

Only)

2

Max.

1

Logic "0" Input Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 30C. Logic "0" Input Current vs.

Temperature (IR21362 High Side Only)

www.irf.com 25

IR2136(2)(3)(5)(6)(7)(8)

y)

(

J& S) & (PbF

)

4

3

2

Max.

1

Logic "0" Input Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 30D. Logic "0" Input Current vs.

Supply Voltage (IR21362 High Side Onl

250

200

150

Max.

100

"High" ITRIP Current ( A)

Typ.

50

0

10 12 14 16 18 20

Suppl y Voltage (V)

250

200

A)

µ

150

100

Max.

50

"High" ITRIP Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 31A. "High" ITRIP Current vs. Temperature

4

A)

µ

3

2

Max.

1

"Low" ITRIP Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 31B. "High" ITRIP Current vs. Supply Voltage

Figure 32A. "Low" ITRIP Current vs. Temperature

26 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

4

3

2

Max.

1

"Low" ITRIP Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 32B. "Low" ITRIP Current vs. Supply Voltage

250

200

150

Max.

100

"High" IEN Current ( A)

50

Typ.

0

10 12 14 16 18 20

Supply V oltage (V)

200

A)

150

µ

Max.

100

50

"High" IEN Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 33A. "High" IEN Current vs. Temperature

4

A)

3

µ

2

Max.

1

"Low" IEN Current (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 33B. "High" IEN Current vs. Supply Voltage

Figure 34A. "Low" IEN Current vs. Temperature

www.irf.com 27

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

4

3

2

M ax.

1

"Low" IEN Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Voltage (V )

Figure 34B. "Low" IEN Current vs. Supply Voltage

Figure 34B. “Low” IEN Current vs. Supply Voltage

4

3

2

Max.

1

RCIN Input Bias Current ( A)

Typ.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 35B. RCIN Input Bias Current vs.

Supply Voltage

4

3

2

Max.

1

RCIN Input Bias Current ( A)

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 35A. RCIN Input Bias Current

vs. Temperature

400

300

Typ.

200

Min.

100

Output Source Current (mA)

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 36A. Output Source Current vs.

Temperature

28 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

500

400

300

200

Typ.

100

Output Source Current (mA)

Min.

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 36B. Out put Source Current vs.

Supply Voltage

600

500

400

300

Typ.

200

Output Sink Current (mA)

Min.

100

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 37B. Output Sink Current vs.

Supply Voltage

500

400

300

200

100

Output Sink Current (mA)

Typ.

Min.

0

-50 -25 0 25 50 75 100 125

Temperatur e (

o

C)

Figure 37A. Output Sink Current vs.

Temperature

250

)

Ω

200

150

100

Max.

50

RCIN Low On-resistance (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 38A. RCIN Low On-resistance vs.

Temperatur e

www.irf.com 29

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

250

200

150

Max.

100

Typ.

50

RCIN Low On-resistance ( )

0

10 12 14 16 18 20

Suppl y Vol tage (V )

Figure 38B. RCIN Low On-resistance vs.

Supply Voltage

250

200

150

Max.

250

)

Ω

200

150

100

Max.

50

FAULT Low On-resistance (

Typ.

0

-50 -25 0 25 50 75 100 125

Temperature (

o

C)

Figure 39A. FAULT Low On- resistance vs.

Temperatur e

0

-3

Typ.

-6

100

Typ.

50

FAULT Low On-resistance ( )

0

10 12 14 16 18 20

Supply Voltage (V)

Figure 39B. FAULT Low On-resistance vs.

Supply Voltage

-9

Offset Supply Voltage (V)

S

-12

V

-15
10 12 14 16 18 20

Supply Volt age (V)

Figure 40. Maximum VS Negative Offset vs. V

Supply Voltage

BS

30 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

120

C)

100

o

80

60

40

Junction Temperature (

20

0.1 1 10 100
Frequency (KHz)

Figure 41. IR2136/IR21362(3)(5)(6)(7)(8)

vs. Frequency (IRG4BC20W), R

120

100

C)

o

80

60

Junction Temperature (

40

gat

e=33

300V
200V

100V

0V

ΩΩ

Ω, Vcc=15V

ΩΩ

300V
200V
100
0V

V

120

100

C)

o

80

60

Junction Temperature (

40

20

0.1110100
Frequency (KHz)

300V
200V
100

0V

Figure 42. IR2136/IR21362(3)(5)(6)(7)(8)

vs. Frequency (IRG4BC30W), R

120

100

C)

o

80

60

Junction Temperature (

40

gate

ΩΩ

=15

Ω, Vcc=15V

ΩΩ

300V
200V

100
0V

20

0.1 1 10 100
Frequency (KHz)

Figure 43. IR2136/IR21362(3)(5)(6)(7)(8)

vs. Frequency (IRG4BC40W), R

gat

e=10

ΩΩ

Ω, Vcc=15V

ΩΩ

20

0.1 1 10 100
Frequency (KHz)

Figure 44. IR2136/IR21362(3)(5)(6)(7)(8)

vs. Frequency (IRG4PC50W), R

gate

ΩΩ

=5

Ω, Vcc=15V

ΩΩ

www.irf.com 31

IR2136(2)(3)(5)(6)(7)(8)

(

J& S) & (PbF

)

120

100

C)

o

80

60

Junction Temperature (

40

20

0.1 1 10 100
Frequency (KHz)

Figure 45. IR2136/IR21362(3)(5)(6)(7)(8) (J)

vs. Frequency (IRG4BC20W), R

120

100

C)

o

80

gat

e=33

300V
200V
100V

0V

ΩΩ

Ω, Vcc=15V

ΩΩ

120

100

C)

o

80

60

Junction Temperature (

40

20

0.1110100
Frequency (KHz )

300V
200V

100V

0V

Figure 46. IR2136/IR21362(3)(5)(6)(7)(8) (J)

vs. Frequency (IRG4BC30W), R

120

100

C)

o

80

gate

ΩΩ

=15

Ω, Vcc=15V

ΩΩ

60

Junction Temperature (

40

20

0.1 1 10 100
Frequency (KHz)

Figure 47. IR2136/IR21362(3)(5)(6)(7)(8) (J)

vs. Frequency (IRG4BC40W), R

gat

e=10

300V
200V
100V

ΩΩ

Ω, Vcc=15V

ΩΩ

0V

60

Junction Temperature (

40

20

0.1110100
Frequency (KHz)

300V
200V

100V

0V

Figure 48. IR2136/IR21362(3)(5)(6)(7)(8) (J)

vs. Frequency (IRG4PC50W), R

gate

ΩΩ

=5

Ω, Vcc=15V

ΩΩ

32 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

120

100

C)

o

80

60

Junction Temperature (

40

20

0.1 1 10 100
Frequency (KHz)

Figure 49. IR2136/IR21362(3)(5)(6)(7)(8) (S)

vs. Frequency (IRG4BC20W), R

120

100

C)

o

80

60

Junction Temperature (

40

gat

e=33

300V
200V

100

0V

ΩΩ

Ω, Vcc=15V

ΩΩ

300V
200V
100
0V

120

100

C)

o

80

60

Junction Temperature (

40

20

0.1 1 10 100
Frequenc y (KHz )

Figure 50. IR2136/IR21362(3)(5)(6)(7)(8) (S)

vs. Frequency (IRG4BC30W), R

120

100

C)

o

80

60

Junction Temperature (

40

gate

=15

300V
200V

100
0V

ΩΩ

Ω, Vcc=15V

ΩΩ

300V

200V

100

0V

20

0.1 1 10 100
Frequency (KHz)

Figure 51. IR2136/IR21362(3)(5)(6)(7)(8) (S)

vs. Frequency (IRG4BC40W), R

gat

e=10

ΩΩ

Ω, Vcc=15V

ΩΩ

20

0.1110100
Frequency (KHz)

Figure 52. IR2136/IR21362(3)(5)(6)(7)(8) (S)

vs. Frequency (IRG4PC50W), R

gate

ΩΩ

=5

Ω, Vcc=15V

ΩΩ

www.irf.com 33

IR2136(2)(3)(5)(6)(7)(8)

Case outlines

(

J& S) & (PbF

)

28-Lead PDIP (wide body)

01-3024 02

01-3040 02

(MS-011AB)

(MS-013AE)28-Lead SOIC (wide body)

01-6011

01-6013

34 www.irf.com

IR2136(2)(3)(5)(6)(7)(8)

(

J&S) & (PbF

)

NOTES

44-Lead PLCC w/o 12 leads

www.irf.com 35

01-3004 02(mod.) (MS-018AC)

01-6009 00

IR2136(2)(3)(5)(6)(7)(8)

LEADFREE PART MARKING INFORMATION

(

J& S) & (PbF

)

Part number

Date code

Pin 1
Identifier

?

MARKING CODE

Lead Free Released

P

Non-Lead Free
Released

IRxxxxxx

YWW?

IR logo

?XXXX

Lot Code

(Prod mode - 4 digit SPN code)

Assembly site code
Per SCOP 200-002

ORDER INFORMATION

Basic Part

28-Lead PDIP IR2136/IR21363(5)(6)(7)(8) order IR2136/IR21363(5)(6)(7)(8)
28-Lead SOIC IR2136/IR21363(5)(6)(7)(8) (S) order IR2136/IR21363(5)(6)(7)(8) (S)
44-Lead PLCC IR2136/IR21363(5)(6)(7)(8) (J)) order IR2136/IR21363(5)(6)(7)(8) (J)
28-Lead PDIP IR21362 order IR21362
28-Lead SOIC IR21362S order IR21362S
44-Lead PLCC IR21362J order IR21362J

Leadfree Part

28-Lead PDIP IR2136/IR21363(5)(6)(7)(8) order IR2136/IR21363(5)(6)(7)(8)PbF
28-Lead SOIC IR2136/IR21363(5)(6)(7)(8) (S) order IR2136/IR21363(5)(6)(7)(8) (S)PbF
44-Lead PLCC IR2136/IR21363(5)(6)(7)(8) (J)) order IR2136/IR21363(5)(6)(7)(8) (J)PbF
28-Lead PDIP IR21362 order IR21362PbF
28-Lead SOIC IR21362S order IR21362SPbF
44-Lead PLCC IR21362J order IR21362JPbF

WORLD HEADQUARTERS: 233 Kansas Street, El Segundo, California 90245 Tel: [phone]

http://www.irf.com/ Data and specifications subject to change without notice. 5/25/2005

36 www.irf.com

This product has been qualified per industrial level