Datasheet ICTE-45, ICTE-45C Datasheet (MDE)

MDE Semiconductor, Inc.

V

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

STANDOFF VOLTAGE- 5.0 to 45.0V

1500 Watt Peak Power

FEATURES

• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O

• Glass passivated chip junction in Molded Plastic package

• 1500W surge capability at 1ms

• Excellent clamping capability

• Low zener inpedance

• Fast response time: typically less than

1.0 ps from 0 volts to BV min.

• Typical IR less than 1µA above 10V

• High temperature soldering guaranteed:
250°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension

• Includes 1N6373 thru 1N6385

MECHANICAL DATA

Case: JEDEC DO-201 Molded plastic
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.045 ounces, 1.2 grams

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

RATING SYMBOL

Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms

(NOTE 1)

Peak Pulse Current of on 10/1000 µs waveform
Steady State Power Dissipation at
Lead lengths .375", 9.5mm
Peak Forward Surge Current, 8.3ms Single Half Sine-wave

Superimposed on Rated Load,
Maximum instantaneous forward voltage at 100A for

unidirectional only
Operatings and Storage Temperature Range Tj, Tstg -55 +175 °C

(Note 2)

TL = 75°C

(JEDEC Method)(Note 3)

(Note 1)

Pppm

Ippm SEE TABLE 1 Amps

Pm(AV)

IFSM

Vf 3.5

ALUE UNITS

Minimum 1500 Watts

5.0

200 Amps

Watts

Volt

NOTES:

1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.

3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.

8/6/2002

MDE Semiconductor, Inc.

4

V

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

ICTE5.0 tou ICTE15C MPTE-5 to MPTE-45

1N6373 to 1N6381 and 1N6382 to 1N6389

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

STANDOFF VOLTAGE- 5.0 to 45.0V

1500 Watt Peak Power

Part Numbers

ICTE-5* 1N6373 MPTE-5*

ICTE-8 1N6374 MPTE-8
ICTE-10 1N6375 MPTE-10
ICTE-12 1N6376 MPTE-12
ICTE-15 1N6377 MPTE-18
ICTE-18 1N6378 MPTE-18
ICTE-22 1N6379 MPTE-22
ICTE-36 1N6380 MPTE-36
ICTE-45 1N6381 MPTE-45

ICTE-8C 1N6382 MPTE-8C
ICTE-10C 1N6383 MPTE-10C
ICTE-12C 1N6384 MPTE-12C
ICTE-15C 1N6385 MPTE-15C
ICTE-18C 1N6386 MPTE-18C
ICTE-22C 1N6387 MPTE-22C
ICTE-36C 1N6388 MPTE-36C
ICTE-45C 1N6389 MPTE-45C

REVERSE

STANDOFF

VOLTAGE

(VRWM)

(V)

5*

8.0

10.0

MINIMUM

BREAKDOWN

VOLTAGE

VBR @ 1mA

(Volts)

6.0

9.4

11.7

MAXIMUM

REVERSE
LEAKAGE

IR @ Vr

(µA)

MAXIMUM

CLAMPING

OLTAGE

(Vc) @

Ipp=1A

(Volts)

300.0 7.1 7.5 160.0

25.0 11.3 11.5 100.0

2.0 13.7 14.1 90.0

MAXIMUM

CLAMPING

VOLTAGE

(Vc) @ Ipp=1A

(Volts)

MAXIMUM

12.0 14.1 2.0 16.1 16.5 70.0

15.0 17.6 2.0 20.1 20.6 60.0

18.0 21.2 2.0 24.2 25.2 50.0

22.0 25.9 2.0 29.8 32.0 40.0

36.0 42.4 2.0 50.6 54.3 23.0

45.0 52.9 2.0 63.3 70.0 19.0

8.0 9.4 50 11.4 11.6 100.0

10.0 11.7 2.0 14.1 14.5 90.0

12.0 14.1 2.0 16.7 17.1 70.0

15.0 17.6 2.0 20.8 21.4 60.0

18.0 21.2 2.0 24.8 25.5 50.0

22.0 25.9 2.0 30.8 32.0 40.0

36.0 42.4 2.0 50.6 54.3 23.0

45.0 52.9 2.0 63.3 70.0 19.0

PEAK

PULSE

CURRENT

Ipp (A)

*ICTE-5 is not available in Bi-directional. Suffix 'C' denotes Bi-directional device.