Page 1
www.jbctools.com
HT420
THERMAL TWEEZERS
Page 2
HT420 / THERMAL TWEEZERS
HT420-A
THERMAL TWEEZERS
INSTALLATION
DD-2B/DD-1B/DD-9B
CONTROL UNIT
MANUAL
www.j bcto ols. com
HT420
THERMAL TWEEZERS
HT-SD
STAND
Power cord socket
Equipotential connection
Connectable control units: DI, DD, DM and RM.
2
HT420-A
Thermal tweezersCartridge C420
Page 3
CHANGING THE CARTRIDGE
Cartridge electric
connection screw
WARNING: It is esential to tighten this screw for
the tool to function.
RANGE OF CARTRIDGES
Alignment
Important: It is esential to insert the cartridge
till the end for a good connection.
Take the mark as reference and check that
both tips of the tweezer coincide.
Chip Components
C420-271 A=1,5mm
C420-272 A=2,6mm
Cable stripper
C420-281 C420-282
C420-281 C420-282
C420-283 A=50mm
A
Dual in line
C420-273 A=4mm
C420-274 A=6mm
C420-275 A=8mm
C420-276 A=10mm
C420-277 A=15mm
C420-278 A=20mm
ø 3,5mm max.
C420-285 A=22mm
QFP y PLCCBlade Type
Consult our wide range of cartridges with more than 250 references in www.jbctools.com.
For special cartridges contact with our distributor.
C420-279 A=8mm
C420-280 A=11mm
A
A
A
3
Page 4
TECHNICAL SPECIFICATIONS
- Total weight without cartridge: 102 gr. aprox
- ESD Safe
This product should not be
thrown in the garbage.
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
www.jbctools.com
0008868/0513
Loading...