Datasheet FTR-P6GN010WA, FTR-P6GN012WA Specification

MINIATURE SURFACE MOUNT RELAY

For automotive applications
1 POLE - 25A

FTR-P6 Series

■ FEATURES

• Surface mount relays for automotive applications

• Miniature size (67% of the volume of FTR-P3 relays)

• High contact capacity with proven contact material

(100,000 operations, 14V, 25A)

• Low coil power dissipation

(800mW nominal achieved with state-of-the-art magnetic design)

• Semi low noise (average acoustic noise level: 60dB distance 5cm)

• Application examples: Power window, door lock, power seat, sunroof, wiper

• RoHS compliant

Please see page 7 for more information

■ Part Numbers

[Example] FTR-P6 G N 012 WA **

(a) (b) (c) (d) (e) (f)

(a) Relay type FTR-P6 : FTR-P6 series

(b) Contact conguration G : 1 form C

(c) Contact gap N : 0.25mm gap

(d) Contact rated voltage 012 : 10..... 12VDC

Coil rating table at page 3

(e) Contact material WA : Silver-tin oxide indium

(f) Special type None

Others

Actual marking does not carry the type name: "FTR"
E.g.: Ordering code: FTR-P6GN012WA Actual marking: P6GN012WA

: Standard package

DP

: Dry package

: To be assigned custom specication

1

FTR-P6 Series

■ Specications

Item FTR-P6

Remarks / conditions

Contact
data

Coil Coil power consumption Approx. 0.8W At rated coil voltage

Timing
data

Life Mechanical Min. 1 x 10⁶ operations

Insula­tion

Conguration 1 form C
Material Silver-tin oxide
Voltage drop Max. 100 mV At 1A, 12VDC (resistance)
Contact rating 25A, 14VDC Motor locked
Max. carrying current 25A / 1h 25°C, nominal voltage applied to coil
Max. inrush current 35A
Min. switching load * 1A, 6VDC Reference

Operating temperature
range

Storage temperature range -40ºC ~ +100ºC No frost
Operating humidity 45 to 85% RH
Operate Max. 10ms
Release Max. 5ms

Electrical Min. 100 x 10³ operations 14VDC, 25A locked motor
Insulation resistance Min. 100MΩ at 500VDC Initial
Dielectric

withstanding
voltage

Open con­tacts

Coil contact 500VAC (50/60Hz), 1 minute

500VAC (50/60Hz), 1 minute

-40ºC ~ +85ºC No frost

Other Vibration

resistance

Shock resis­tance

Dimensions / weight 9.0 x 12.0 x 10.3 mm / approx. 3.3g

*

: Minimum switching loads mentioned above are reference values. Please perform the conrmation test with actual

load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
Note: Care shall be taken on the heat generated on PC board when maximum carrying current exceeds 10A.

Please perform the conrmation test with actual conditions.

Misoperation 10 to 200Hz, 44m/s2 (4.5G),

constant acceleration

Endurance 10 to 200Hz, 44m/s2 (4.5G),

constant acceleration
Misoperation Min. 100m/s² (11 ± 1ms)
Endurance Min. 1,000m/s² (6 ± 1ms)

2

FTR-P6 Series

■ Coil Data

Coil

code

010 10 125 6.5 (at 20ºC)

012 12 180 7.3 (at 20ºC)

Note: All values in the table are valid at 20oC and zero contact current, unless otherwise specied.

*

: Specied operated values are valid for pulse wave voltage.

■ Dimensions

• Dimensions

Rated Coil Voltage

(VDC)

Coil Resistance +/-10%

(Ω)

Must Operate Voltage*

(VDC)

8.2 (at 85ºC)

9.2 (at 85ºC)

Must Release Voltage*

(VDC)

0.8 (at 20ºC)

1.0 (at 85ºC)

1.0 (at 20ºC)

1.3 (at 85ºC)

*Dimensions of the terminals do not include thickness of pre-solder.

• Schematics

(TOP VIEW)

• PC Board Mouting Hole Layout

(TOP VIEW)

( ): Reference value
Unit: mm

3

■ Packaging

0.4

2.0 4.0

11.0

11.9

24.0

φ

1.55

φ

2.2

φ

12.5

11.5 1.75

24.0

Contact resistance (mΩ)

FTR-P6 Series

25.5

Top cover tape

380

φ

13.0

Embossed carrier tape

■ Characteristic Data (Reference)

Life test (example)

Test condition
25A 16VDC
motor lock
100,000 operations min.

0.5 sec. ON, 5.5 sec. OFF

Test circuit

RL-1

N.O.

N.C.

M

N.O.

N.C.

RL-2

Operate / release voltage

10

Voltage (V)

0.4

12.5

11.0

Operate voltage

5

Release voltage

Ø 55.1

11.9

Ø 2.2

2.0

4.0

11.5 1.75

24.0

24.0

0

Initial

Number of operations (x104)

1001010.1

Current wave form

（

RL-1

25 A

0 A

0.5 sec 0.5 sec

6 sec

）

1000

100

10

1

0.1

Initial

Make
Break

Number of operations (x10

(Measured at DC 6V, 1A wet)

4

)

100101

4

FTR-P6 Series

（

RL-1

）

6 sec

25 A

0 A

0.5 sec 0.5 sec

M

RL-1

RL-2

N.O.

N.C.

N.O.

N.C.

0

5

10

1001010.1

0.1

100101

100

1000

10

1

Life test (example)

Number of operations (x104)

Test condition
25A 16VDC
motor lock
100,000 operations min.

0.5 sec. ON, 5.5 sec. OFF

Test circuit

Current wave form

Voltage (V)Contact resistance (mΩ)

(Measured at DC 6V, 1A wet)

Initial

Operate voltage

Make
Break

Release voltage

Number of operations (x10

4

)

Initial

Contact resistance (mΩ)

Operate / release voltage

Ratio to nominal coil voltage (%)

Inrush current 20A, 16VDC
motor free
400,000 operations min.

1.5 sec. ON, 2.0 sec. OFF

Test circuit

Test condition

Current wave form

20 A

0 A

Operate / release voltage

10

RL

N.O.
N.C.

5

Voltage (V)

M

0

Initial

1000

Make

5 A

19 A

100

10

1

0.1

Break

Initial

Operate voltage

Release voltage

Number of operations (x104)

Number of operations (x10

(Measured at DC 6V, 1A wet)

4

)

1001010.1

100101

Coil temperature rise

100

90

80

70

60

50

40

30

Coil temperature rise(℃)

20

10

0

Contact carry current 20A

Contact carry current 10A

Contact carry current 0A

10 20 30 40

0.8 W

0.8 W

0.8 W

140

120

100

80

60

40

Applied time (minutes)

Operating coil voltage range

(FTR-P6GN012WA)

Intermittent operations
need to be at 15A
continuous current

Continuous coil operation

Must operate voltage

-30 -20 0 20 40 60 80 100

Ambient temperature (℃)

5

FTR-P6 Series

Must operate voltage

-30 -20 0 20 40 60 80 100

40

60

80

100

120

140

0.8 W

0.8 W

0.8 W

10 20 30 40

10

0

30

50

70

90

20

40

60

80

100

Coil temperature rise

Operating coil voltage range

(FTR-P6GN012WA)

Coil temperature rise(℃)

Applied time (minutes)

Ambient temperature (℃)

Ratio to nominal coil voltage (%)

Contact carry current 20A

Continuous coil operation

Intermittent operations
need to be at 15A
continuous current

Contact carry current 10A

Contact carry current 0A

Vibration resistance characteristics

Dual amplitude (mm)

100

)

2

50

44

Acceleration (m/s

m/s

10

1,000

Automotive electronics standard

2

10 50 100 500 1000 2000

Shock resistance characteristics

)

800

2

600

400

Shock level (m/s

200

0

X1 X2 Y1 Y2 Z1 Z2

5 1 0.5 0.1 0.01

Frequency (Hz)

Shock direction

Frequency: 10 to 2000Hz

Range where

chattering occurs
N.O.contact coil

not energized on
X-direction

Acceleration: 100m/s
Direction of vibration: See diagram below
Direction level: chatter > 1ms

X

Y

2

max.

Z

Shock application time: 6±1ms, half-sine wave
Test condition: Coil energized and de-energized
Shock direction: See diagram below
Direction level: chatter > 1ms

Y2

X1

X2

Y1

Z2

Z1

: Break contact (coil de-energized)
: Make contact (coil energized)

Distribution of operate/release voltage Distribution of operate/release time Distribution of contact resistance

100

FTR-P6GN012WA

＝

n

100

Operate voltage
Release voltage

80

60

40

Distribution (%)

20

0

0 10 20 30 40 50 60 70 80

100

FTR-P6GN012WA
n＝100

80

60

40

Distribution (%)

20

0

Operate voltage
Release voltage

(without diode)

100

80

60

40

Distribution (%)

20

0

0 10 20 30 40 50 60 70 800 1 2 3 4 5 6 7 8

FTR-P6GN012WA
n＝100

Nominal voltage multiplying factor (%) Time (ms) Contact resistance (mΩ)

6

FTR-P6 Series

GENERAL INFORMATION

1. ROHS Compliance

• All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amend-

ments.

• Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 2001/65/EU.

Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for
new designs.

• All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:

http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf

• Characteristic data is not guaranteed values, but measured values of samples from production line.

2. Recommended lead free solder condition

• Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specied. This material has

been veried to be compatible with PbSn assembly process.

• Recommended solder for assembly: Sn-3.0Ag-0.5Cu.

Solder by Soldering Iron:

Soldering Iron 30-60W

Temperature: maximum 340-360˚C

Duration: maximum 3 sec.

Reow Solder Condition:

We highly recommend that you conrm your actual solder conditions

3. Moisture Sensitivity

• Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicat-

ed. -DP relay will be shipped in moisture barrier bag.

4. Tin Whiskers

• Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable

length whisker was found by our in house test.

7

Fujitsu Components International Headquarter Ofces

FTR-P6 Series

Japan

FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower 19F,
12-4, Higashi-shinagawa 4-chome, Shinagawa-ku,
Tokyo,140-0002, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fujitsu.com/jp/fcl/

North and South America

FUJITSU COMPONENTS AMERICA, INC
2290 North First Street, Suite 212
San Jose, CA 95131, USA
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: us.fujitsu.com/components

Europe

FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fujitsu.com/uk/components

Asia Pacic

FUJITSU COMPONENTS ASIA, LTD.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fujitsu.com/sg/products/devices/components

China

FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070,
China
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fujitsu.com/sg/products/devices/components

Hong Kong

FUJITSU COMPONENTS HONG KONG CO., LTD
Unit 506, Inter-Continental Plaza
No.94 Granville Road, Tsim Sha Tsui, Kowloon,
Hong Kong
Tel: [phone]
Tex: (852) 2894-9512
Email: [e-mail]
Web: www.fujitsu.com/sg/products/devices/components/

Korea

FUJITSU COMPONENTS KOREA LIMITED
Alpha Tower #403, 645 Sampyeong-dong,
Bundang-gu, Seongnam-si, Gyeonggi-do,
13524 Korea
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.fujitsu.com/sg/products/devices/components/

©2017 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.

The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.

Fujitsu Components Europe B.V. and afliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its

employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.

Nor do Fujitsu Components Europe B.V. and afliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or tness for particular use,

with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. March 16th, 2017

8