Page 1
CUD SERIES - DUAL OUTPUT, 1.0 WATT
DESCRIPTION
CUD non-regulated, dual output DC/DC converters offer
short circuit protection and 500 VDC isolation in an
industry standard DIP package. Available in 5 or 12 Volt
input versions, the CUD is perfect for industrial and EDP
applications. Please see the CUS series for single
output applications.
Selec tion Ch art
Model
CUD512 4.5 - 5.5 0
CUD515 4.65 - 5. 50
CUD1212 10.90 - 13. 20
CUD1215 10.90 - 13. 20
Note: For model options, see the last page of this file.
Input Range
VDC
Output VDC Output Current
±
12
15
±
±
12
±
15
±
0.062
0.050
±
±
0.062
±
0.050
FEATURES
• Industry Standard
Package
• Industry Standard
Pinout
• 85°C Case Operation
1.25”
(31.8mm)
0.40”
(10.2mm)
• 5V and 12V Inputs
• Input Pi Filter
• Low Profile DIP Package
• 500V Isolation
• Short Circuit Protection
0.80”
(20.3mm)
1
Page 2
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION SUFFIX APPLICABLE SERIES REMARKS
Negative Logic N HAS, HBD, HBS, HES, LES, QBS,
Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES
Terminal Strip TS XWS, XWD, XWT
Trim 1 IAS, LES
Enable 2 IAD, IAS, LES, SMS
Trim and Enable 3 IAS, LES
Current Share 4 SMS
Headerless Y Encapsulated EWS, IWS, OWS
PIN LENGTH AND HEATSINK
OPTIONS
0.110” (2.8mm) Pin Length 8 All Units (Except SMS)
0.150” (3.8mm) Pin Length 9 All Units (Except SMS)
0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM
0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM
0.45” (11.4mm) Horizontal
Heatsink
0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM
0.95” (24.1mm) Horizontal
Heatsink
0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM
2H All Units (Except DIP, SIP, and SM
3H All Units (Except DIP, SIP, and SM
QES, TES, TQD
Packages)
Packages)
Packages)
Packages)
Packages)
Packages)
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
Standard Pin Length is 0.180”
(4.6mm)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
2
Loading...