Page 1
•
•
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Input Current • 1.5 A max
Inrush Current • 50 A max at 115 VAC or
100 A max at 264 VAC cold start
Output
Output Voltage • See Tables
Output Current • See Tables
Total Output Power • 0 to 48 Watts
Hold Up Time • 8 ms at 115 VAC
Ripple & Noise • 1% peak to peak max
General
Overvoltage • Set at 111-142% of nominal
Protection output, typically 125%
Overcurrent • Protected to short circuit
Protection conditions
Efficiency • 82% typical
Temperature • +0.04%/°C max.
Coefficient
Transient Response • Maximum excursion of 4% or
better on all models. Recovers to
1% of final value within 500 µs after a
25% step load change
Withstand Voltage • 3000 VAC from input to output
1500 VAC from input to ground
500 VAC from output to ground
Environmental
Operating • 0 °C to +55 °C, derate linearly from
Temperature 100% load at +45 °C to 50% load
at +55 °C
Storage • -20 °C to +85 °C
Temperature
MTBF • 100,000 hours minimum at full load
at +25 °C ambient
Insulation Resistance • 50 Mohm minimum from
output to ground
Safety & EMC
Safety Approvals • Approved to
a) UL 1950
b) CSA C22.2 No. 234 per cUL
c) EN 60950
EMI • Meets conducted and radiated
limits of:
a) FCC 20780 Class B
b) CISPR Class B
45 Watts
CUP45 Series
AC/DC External Desktop
Specification
•
Intelligent Design Quality Product
XPiQ inc.
CE Marked For EMC & LVD
•
Universal Input
•
100% Burn In
•
Internal EMI Filter
•
Low Profile
•
Short Circuit Protected
•
International Safety Approvals
All specifications typical at nominal line, full load and 25°C
PH: 508 429.9883
FAX: 800 226.2100
Email: [email protected]
Holliston, MA 01746 USA
www.XPiQ.com
67
Page 2
Mechanical Details
Maximum Output Model
Output Power Vnom Imin Imax Tol.* Numbers
30 W 5 V 0 A 6.00 A -5%, +7% CUP45-10
45 W 12 V 0 A 3.75 A 5% CUP45-12
45 W 15 V 0 A 3.00 A 4% CUP45-13
45 W 18 V 0 A 2.50 A 3% CUP45-13-1
45 W 19 V 0 A 2.37 A 3% CUP45-13-2
45 W 24 V 0 A 1.88 A 3% CUP45-14
48 W 48 V 0 A 1.00 A 2% CUP45-18
NOTES
1. Dimensions shown in mm (inches).
2. Tolerance 0.5 (0.02) maximum.
3. Output connector is 5.5mm outer diameter barrel. Inner diameter is 2.5mm with center positive (+)/outer shell negative (-) polarity.
4. Output cable length is 48” (±0.8”).
5. Optional output connectors available.
6. Weight: 300 g approx
.
OUTPUT VOLTAGE & CURRENT RATINGS CUP45
* Total regulation includes intial tolerance, line regulation and load regulation.
Notes
•
68
PH: 508 429.9883
FAX: 800 226.2100
Email: [email protected]
Holliston, MA 01746 USA
www.XPiQ.com
Loading...