Page 1
Specification for
BT 96040AV-SRE-12-I2C-COG
BA TRON
Version June 2004
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
0
www.data-modul.de
Page 2
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
VL-FS-COG-BT96040-02 REV. A
PAGE 2 OF 11
DOCUMENT REVISION HISTORY 1:
DOCUMENT
REVISION
DATE DESCRIPTION CHANGED
BY
CHECKED
BY
FROM TO
A
2004.06.10
First Release.
Based on
a.) Test Specification:
VL-TS-COG-BT96040-02 REV. A,
2004-04-22.
b.) VL-QUA-012A, REV. R,
MAR/2004
ZHANG
XIAO LAN
TIAN
JIAN WEI
According to VL-QUA-012A, LCD
size is small because Unit Per
Laminate=35 which is more than
6pcs/Laminate.
Page 3
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 3 OF 11
VL-FS-COG-BT96040-02 REV. A
CONTENTS
Page No.
1. GENERAL DESCRIPTION 4
2. MECHANICAL SPECIFICATIONS 4
3. INTERFACE SIGNALS 6
4. ABSOLUTE MAXIMUM RATINGS 7
4.1
4.2 ENVIRONMENTAL CONDITION 7
5. ELECTRICAL SPECIFICATIONS 8
5.1 TYPICAL ELECTRICAL CHARACTERISTICS 8
5.2 TIMING SPECIFICATIONS 9
6. LCD COSMETIC CONDITIONS 11
7.
ELECTRICAL MAXIMUM RATINGS (Ta=25°C)
Label Note
7
11
Page 4
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 4 OF 11
VL-FS-COG-BT96040-02 REV. A
Specification
of
LCD Module Type
Item No.: COG-BT96040-02
1. General Description
u 96 x 40 dots STN Yellow Positive Reflective Dot Matrix LCD module.
u Viewing Angle: 12 O’clock direction.
u Driving duty: 1/40 Duty, 1/7.3 bias.
u Driving IC: ‘PHILIPS’ PCF 8558U/2/F2 (Gold Bump) LCD controller/driver or equivalent.
u COG.
u Data interface: I2C-bus.
u Bonded pins.
2. Mechanical Specifications
The mechanical detail is shown in Fig. 1 and summarized in Table 1 below.
Table 1
Parameter Specifications Unit
Outline dimensions 46.0(W) x 36.2(H) x 1.845(D) (Excluded pins) mm
Viewing area 40.0(W)x 23.0(H) mm
Active area 35.2(W)x 18.2(H) mm
Di splay format 96 x 40 dots
Weight: TBD grams
Page 5
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 5 OF 11
VL-FS-COG-BT96040-02 REV. A
Figure 1: Module Specification.
Page 6
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 6 OF 11
VL-FS-COG-BT96040-02 REV. A
COG-BT96040-02
SDA
VSS
VLCD
VDD
SCL
'PHILIPS'
PCF8558U/2/F2
(GOLD BUMP)
LCD CONTROLLER/
DRIVER OR
EQUIVALENT
40
Figure 2: Block Diagram
3. Interface signals
Table 2
Pin No. Symbol Description
1 SDA I2C-bus serial data input/output
2 VSS Ground (0V).
3 VLCD Power supply for LCD driver.
4 VDD Power supply for logic (+5V).
5 SCL I2C-bus serial clock input
96 X 40 DOTS
96
Page 7
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 7 OF 11
VL-FS-COG-BT96040-02 REV. A
4. Absolute Maximum Ratings
4.1 Electrical Maximum Ratings(Ta = 25 ºC)
Table 3
Parameter Symbol Min. Max. Unit
Power Supply voltage (Logic) VDD - VSS -0.5 +8.0 V
Input voltage range
Vin VSS-0.5 +8.0 V
(SDA,SCL)
Supply voltage (LCD) Vop=VDD-VLCD 0 +11.0 V
Note:
The modules may be destroyed if they are used beyond the absolute maximum ratings.
All voltage values are referenced to VSS = 0V.
4.2 Environmental Condition
Item
Ambient Temperature
Humidity
95% max. RH for Ta ≤ 40°C
< 95% RH for Ta > 40°C
Vibration (IEC 68-2-6)
cells must be mounted
on a suitable connector
Shock (IEC 68-2-27)
Half-sine pulse shape
Frequency: 10 ∼ 55 Hz
Amplitude: 0.75 mm
Duration: 20 cycles in each direction.
Pulse duration : 11 ms
Peak acceleration: 981 m/s2 = 100g
Number of shocks : 3 shocks in 3
mutually perpendicular axes.
Table 4
Operating
Temperature
(Topr)
Storage
Temperature
(Tstg)
Min. Max. Min. Max.
0°C +50°C -10°C +60°C
Remark
Dry
no condensation
3 directions
3 directions
Page 8
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 8 OF 11
5. Electrical Specifications
5.1 Typical Electrical Characteristics
At Ta = 25 °C, VDD = 5V±5%, VSS=0V.
Table 5
Parameter Symbol Conditions Min. Typ. Max. Unit
Supply voltage
(Logic)
Operating voltage
for LCD
current
(Logic&LCD)
Input signal
voltage low
(SDA, SCL)
Input signal
voltage high
(SDA, SCL)
VDD-VSS 4.75 5.0 5.25 V
Vop
= VDD -VLCD
IDD
Vil VSS - 0.3 VDD V
Vih 0.7
Ta= 0°C,VDD
=+5V, Character
mode, Note 1
Ta=+25 °C,VDD
=+5V, Character
mode, Note 1
Ta=+50 °C,VDD
=+5V, Character
mode, Note 1
Character mode,
VDD =5.0V
Checker board,
VDD =5.0V
VL-FS-COG-BT96040-02 REV. A
- 7.3 - V
6.9 7.1 7.3 V
- 6.9 - V
- 100 150 ìA Operating supply
- 110 160 ìA
- VDD V
VDD
Note 1: There is tolerance in optimum LCD driving voltage during production and it will be within
the specified range.
Page 9
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 9 OF 11
5.2 Timing Specifications
VL-FS-COG-BT96040-02 REV. A
Ta = 0 °C to +50 °C, VDD = +5.0V±5%, VSS=0V; V
= VDD-3.5V to VDD-9V, VSS=0V.
LCD
Refer to Figure 3, I2C Bus Timing Diagram of ’PHILIPS’ PCF8558.
Table 6
Page 10
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 10 OF 11
VL-FS-COG-BT96040-02 REV. A
Figure 3: I2C-Bus Timing Diagram
Page 11
BA TRON
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
(BT 96040AV-SRE-12-I2C-COG)
JUN/2004
PAGE 11 OF 11
6. LCD Cosmetic Conditions
Refer to VL-QUA-012A.
Note: LCD size of the product is small.
7. Label Note:
VL-FS-COG-BT96040-02 REV. A
Identification labels will be stuck on the module without obstructing the viewing area of
display.
- END -
Loading...