Datasheet CMM2032-BD Datasheet (CELER)

3236 Scott Boulevard Santa Clara, California 95054 Phone: [phone] Fax: [phone]

CMM2032-BD

Features

❏ Small Size
❏ High Gain: 12 dB Typical
❏ P1dB = +18 dBm, Typical
❏ 30 kHz to 32 GHz Bandwidth
❏ Low Gain Ripple: 1.0 dB pp Typical
❏ Sub 0.25 Micron PHEMT
❏ Low DC Power Consumption

Applications
❏ Input Stage Driver for LiNb03Modulator

Driver Amplifier @ OC-192/OC-768

❏ Medium Power Linear Gain Block for

Broadband Systems

❏ Receive Amplifier for OC-192 /OC-768

Description

The CMM2032-BD is a precision GaAs MMIC,
medium power amplifier and is part of Celeritek’s family of
WideFiber™ products for optical communications applica­tions.

The CMM2032-BD optical driver amplifier gives
fiber optic system designers a unique combination of wide­band frequency coverage, along with a flat response and very
low internal jitter. It is a precision PHEMT GaAs MMIC
medium power amplifier with +18 dBm @ P1dB. It operates
from 30 kHz to 32 GHz with 12 dB linear gain. Low internal

jitter makes it especially well suited for high speed digital
data applications.

It is an excellent choice as an input stage amplifier for
Lithium Niobate (Mach-Zehnder) external modulator driver
amplifiers for OC-192/STM64 metropolitan and long-haul
dense wave-division multiplexed optical networking applica­tions and other high speed applications such as OC-768.

When used as an amplifier to drive Celeritek’s
CMM3030-BD as much as 7.5 V peak-to-peak can be
achieved.

CMM2032-BD amplifiers are shipped in Gel Pack
from Celeritek’s foundry.

30 kHz to 32 GHz GaAs MMIC

Optical Modulator Driver Amplifier

Advanced Product Information
February 2003

(1 of 4)

Chip Diagram

Specifications (TA= 25°C, V

DD

= 5V)

(On-Wafer Probe)

Parameters Units Min Typ Max

Frequency Range — 30 kHz 32.0 GHz
Small Signal Gain dB 11.0 12.0
Gain Flatness ±dB 0.5
Input VSWR — 1.8:1
Output VSWR — 1.7:1
Power Output (@1 dB Gain Compression) @ 9 GHz dBm +18.0
Current mA 100 150

Units in Microns

3236 Scott Boulevard, Santa Clara, California 95054
Phone: [phone] Fax: [phone]

CMM2032-BD

Advanced Product Information - February 2003

(2 of 4)

Absolute Maximum Ratings

Parameter Rating

Drain Voltage 12 V
Gate Voltage -5 V
Drain Current 375 mA
Continuous Power Dissipation 3.0 W
Channel Temperature +175°C
Storage Temperature -65°C to +175°C
Mounting Temperature +320°C
Input Power +23 dBm

Die Attach and Bonding Procedures

Die Attach: Eutectic die attach is recommended. For eutec­tic die attach: Preform: AuSn (80% Au, 20% Sn); Stage
Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1
min or less.

Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (pre­stressed); Thermocompression bonding is preferred over
thermosonic bonding. For thermocompression bonding:
Stage Temperature: 250°C; Bond Tip Temperature: 150°C;
Bonding Tip Pressure: 18 to 40 gms depending on size of
wire.

Performance Optimization

Using the Gain-Ctl facility of the CMM2032-BD, out­put power may be increased by application of 1.2 to 1.8 Volts
to the Bias Control pad. If the Gain-Ctl facility is not used, a
fixed voltage at the Bias Control pad can be implemented by

connecting a off-chip parallel resistor to the pad which will
lower the output voltage accordingly.

If Bias Control voltage is decreased further than those
lowest values given in the tables, both gain and output power
will start to drop.

Typical Performance

P1dB vs Frequency

3236 Scott Boulevard Santa Clara, California 95054 Phone: [phone] Fax: [phone]

CMM2032-BD

Advanced Product Information - February 2003 (3 of 4)

S11 vs Frequency

Typical Performance

S21 vs Frequency

S22 vs Frequency

S12 vs Frequency

3236 Scott Boulevard, Santa Clara, California 95054
Phone: [phone] Fax: [phone]

CMM2032-BD

Advanced Product Information - February 2003

(4 of 4)

Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating
parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent
rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or
other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent
regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.

Ordering Information

Part Number for Ordering Description

CMM2032-BD Optical Modulator Driver Amplifier

Schematic Diagram

Typical Performance

S22 & S11 vs Frequency Gain Delay vs Frequency