Datasheet BC817-16LT1-D Datasheet (ON Semiconductor)

Download

Page 1

BC817-16LT1G, BC817-25LT1G, BC817-40LT1G

General Purpose Transistors

NPN Silicon

http://onsemi.com

Features

• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS

Compliant

MAXIMUM RATINGS

Rating Symbol Value Unit

Collector − Emitter Voltage V

Collector − Base Voltage V

Emitter − Base Voltage V

Collector Current − Continuous I

CEO

CBO

EBO

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Total Device Dissipation FR− 5 Board, (Note 1) TA = 25°C

Derate above 25°C

Thermal Resistance,

Junction−to−Ambient

Total Device Dissipation Alumina Substrate, (Note 2)

TA = 25°C Derate above 25°C

Thermal Resistance,

Junction−to−Ambient

Junction and Storage Temperature TJ, T

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

1. FR−5 = 1.0 x 0.75 x 0.062 in.

2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina.

stg

45 V

50 V

5.0 V

500 mAdc

225

1.8

556 °C/W

300

2.4

417 °C/W

−55 to +150 °C

mW/°C

COLLECTOR

BASE

EMITTER

SOT−23

CASE 318

STYLE 6

MARKING DIAGRAM

6x M G

6x = Device Code

x = A, B, or C M = Date Code* G =Pb−Free Package

(Note: Microdot may be in either location)

*Date Code orientation and/or overbar may

vary depending upon manufacturing location.

ORDERING INFORMATION

See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

August, 2009 − Rev. 10

1 Publication Order Number:

BC817−16LT/D

Page 2

BC817−16LT1G, BC817−25LT1G, BC817−40LT1G

ELECTRICAL CHARACTERISTICS (T

Characteristic

OFF CHARACTERISTICS

Collector −Emitter Breakdown Voltage

Emitter−Base Breakdown Voltage

Collector Cutoff Current

ON CHARACTERISTICS

DC Current Gain

Collector −Emitter Saturation Voltage

Base −Emitter On Voltage

SMALL−SIGNAL CHARACTERISTICS

Current−Gain − Bandwidth Product

Output Capacitance

(IC = 10 mA)

(VEB = 0, IC = 10 mA)

(IE = 1.0 mA)

(VCB = 20 V) (VCB = 20 V, TA = 150°C)

= 100 mA, VCE = 1.0 V) BC817−16

= 500 mA, VCE = 1.0 V)

(IC = 500 mA, IB = 50 mA)

(IC = 500 mA, VCE = 1.0 V)

(IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz)

(VCB = 10 V, f = 1.0 MHz)

= 25°C unless otherwise noted)

BC817−25 BC817−40

Symbol Min Typ Max Unit

(BR)CEO

(BR)CES

(BR)EBO

CBO

CE(sat)

BE(on)

obo

45 − − V

50 − − V

5.0 − − V

−

100 160 250

−

100

5.0

250 400 600

−

nA mA

− − 0.7 V

− − 1.2 V

100 − − MHz

− 10 − pF

−

ORDERING INFORMATION

Device Specific Marking Package Shipping

BC817−16LT1G

SOT−23

3000/Tape & Reel

(Pb−Free)

BC817−16LT3G

SOT−23

10,000/Tape & Reel

(Pb−Free)

BC817−25LT1G

SOT−23

3000/Tape & Reel

(Pb−Free)

BC817−25LT3G SOT−23

10,000/Tape & Reel

(Pb−Free)

BC817−40LT1G

SOT−23

3000/Tape & Reel

(Pb−Free)

BC817−40LT3G SOT−23

10,000/Tape & Reel

(Pb−Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

†

http://onsemi.com

Page 3

BC817−16LT1G, BC817−25LT1G, BC817−40LT1G

)

1000

100

, DC CURRENT GAIN

1.0

0.8

0.6

VCE = 1 V T

= 25°C

TA = 25°C

1.0 IC, COLLECTOR CURRENT (mA)

Figure 1. DC Current Gain

@ IC/IB = 10

BE(sat)

@ VCE = 1 V

BE(on)

1.0 TJ = 25°C

0.8

0.6

0.4

0.2

IC = 10 mA

100 mA 300 mA 500 mA

, COLLECTOR-EMITTER VOLTAGE (VOLTS

10000.1 10 100

0.01 0.1 10 1001 IB, BASE CURRENT (mA)

Figure 2. Saturation Region

qVC for V

CE(sat)

0.4

V, VOLTAGE (VOLTS)

0.2

CE(sat)

1 10 1000100

IC, COLLECTOR CURRENT (mA)

Figure 3. “On” Voltages

100

C, CAPACITANCE (pF)

0.1 1 VR, REVERSE VOLTAGE (VOLTS)

@ IC/IB = 10

10 100

-1

qVB for V

-2

, TEMPERATURE COEFFICIENTS (mV/ C)°θ

1 10 100 1000

IC, COLLECTOR CURRENT (mA)

Figure 4. Temperature Coefficients

100 ms

1 s

Thermal Limit

0.1

(A)

0.01

Single Pulse Test @ TA = 25°C

0.001

0.01 10 100

10.1

VCE (Vdc)

1 ms

10 ms

Figure 5. Capacitances

Figure 6. BC817−40L Safe Operating Area

http://onsemi.com

Page 4

BC817−16LT1G, BC817−25LT1G, BC817−40LT1G

PACKAGE DIMENSIONS

SOT−23 (TO−236)

CASE 318−08

ISSUE AN

SEE VIEW C

0.25

VIEW C

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.

4. 318−01 THRU −07 AND −09 OBSOLETE, NEW STANDARD 318−08.

DIMAMIN NOM MAX MIN

A1 0.01 0.06 0.10 0.001

b 0.37 0.44 0.50 0.015 c 0.09 0.13 0.18 0.003 D 2.80 2.90 3.04 0.110 E 1.20 1.30 1.40 0.047 e 1.78 1.90 2.04 0.070 L 0.10 0.20 0.30 0.004

STYLE 6:

PIN 1. BASE

MILLIMETERS

0.89 1.00 1.11 0.035

0.35 0.54 0.69 0.014 0.021 0.029

2.10 2.40 2.64 0.083 0.094 0.104

2. EMITTER

3. COLLECTOR

INCHES

NOM MAX

0.040 0.044

0.002 0.004

0.018 0.020

0.005 0.007

0.114 0.120

0.051 0.055

0.075 0.081

0.008 0.012

SOLDERING FOOTPRINT*

0.95

0.037

0.9

0.035

0.8

0.031

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

0.037

SCALE 10:1

2.0

0.079

inches

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loca Sales Representative

BC817−16LT/D