Datasheet ATF-36163-TR1, ATF-36163-BLK Datasheet (HP)

Download

Page 1

1.5 – 18 GHz Surface Mount Pseudomorphic HEMT

Technical Data

ATF-36163

Features

• Low Minimum Noise Figure:

1 dB Typical at 12 GHz

0.6 dB Typical at 4 GHz

• Associated Gain:

9.4 dB Typical at 12 GHz

15.8 dB Typical at 4 GHz

• Maximum Available Gain:

11 dB Typical at 12 GHz 17 dB Typical at 4 GHz

• Low Cost Surface Mount Small Plastic Package

• Tape-and-Reel Packaging Option Available

Applications

• 12 GHz DBS Downconverters

• 4 GHz TVRO Downconverters

• S or L Band Low Noise Amplifiers

Surface Mount Package

SOT-363 (SC-70)

Pin Connections and Package Marking

SOURCE

GATE SOURCE

Note: Package marking provides orientation and identification.

DRAIN

SOURCE

Description

The Hewlett-Packard ATF-36163 is a low-noise Pseudomorphic High Electron Mobility Transistor (PHEMT), in the SOT-363 (SC-70) package. When optimally matched for minimum noise figure, it will provide a noise figure of 1 dB at 12 GHz and 0.6␣ dB at 4 GHz.

Additionally, the ATF-36163 has low noise-resistance, which reduces the sensitivity of noise performance to variations in input impedance match. This feature makes the design of broad band low noise amplifiers much easier. The performance of the ATF-36163 makes this device the ideal choice for use in the 2nd or 3rd stage of low noise cascades. The repeatable performance and consistency make it appropriate for use in Ku-band Direct Broadcast Satellite (DBS) TV systems, C-band TV Receive Only (TVRO) LNAs, Multichannel Multipoint Distribution Systems (MMDS), X-band Radar detector and other low noise amplifiers operating in the 1.5 – 18 GHz frequency range.

This GaAs PHEMT device has a nominal 0.2 micron gate length with a total gate periphery (width) of 200 microns. Proven gold-based metallization system and nitride passivation assure rugged, reliable devices.

5-79

5965-4747E

Page 2

ATF-36163 Absolute Maximum Ratings

Symbol Parameter Units Maximum

in max

STG

Drain - Source Voltage V +3

Gate - Source Voltage V -3

Gate Drain Voltage V -3.5

Drain Current mA I

Total Power Dissipation mW 180

RF Input Power dBm +10

Channel Temperature ° C 150 Storage Temperature °C -65 to 150

[1]

Absolute

dss

Thermal Resistance:

= 160°C/W

ch-c

Note:

1. Operation of this device above any one of these parameters may cause permanent damage.

ATF-36163 Electrical Specifications

= 25° C, ZO = 50 Ω, V

Symbol Parameters and Test Conditions Units Min. Typ. Max.

NF Noise Figure

G Gain at NF

dss

p 10%

GDO

Note:

1. Measured in a test circuit tuned for a typical device.

Transconductance VDS = 1.5 V, VGS = 0 V mS 50 60

Saturated Drain Current VDS = 1.5 V, VGS = 0 V mA 15 25 40

Pinchoff Voltage VDS = 1.5 V, IDS = 10% of I

Gate Drain Breakdown Voltage I

= 1.5 V, Ids = 10 mA, (unless otherwise noted).

[1]

f =12.0 GHz dB 1.2 1.4

f = 12.0 GHz dB 9 10

= 30 µA V - 3.5

dss

V -1.0 -0.35 - 0.15

[1]

ATF-36163 Typical Parameters

= 25°C, ZO = 50 Ω, V

Symbol Parameters and Test Conditions Units Typ.

min

max

1dB

Minimum Noise Figure (Γ

Associated Gain f = 4 GHz dB 15.8

Maximum Available Gain

Output Power at 1 dB Gain Compression f = 4 GHz dBm 5 under the power matched condition f = 12 GHz dBm 5

Note:

1. G

= MAG for K > 1 and G

max

Gate to Source Voltage for IDS = 15 mA VDS = 2.0 V V - 0.2

= 2 V, Ids = 15 mA, (unless otherwise noted).

= Γ

source

[1]

= MSG for K ≤ 1, which is shown on the S-parameters tables.

max

) f = 4 GHz dB 0.6

opt

5-80

f = 12 GHz d B 1.0

f = 12 GHz d B 9.4

f = 4 GH z d B 17.2

f = 1 2 G Hz d B 10.9

Page 3

ATF-36163 Typical Scattering Parameters, Common Source, Z

Freq. S

= 50 Ω, V

= 1.5 V, ID = 10 mA

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang. — dB

0.5 0.99 -11 12.85 4.39 168 -37.72 0.01 79 0.51 -9 0.11 25.24 1 0.98 -22 12.70 4.31 158 -31.70 0.03 71 0.50 -18 0.17 22.26 2 0.96 -42 12.48 4.21 138 -26.02 0.05 55 0.48 -36 0.24 19.28 3 0.93 -61 12.37 4.15 118 -22.73 0.07 40 0.45 -53 0.33 17.56 4 0.87 -83 12.30 4.12 97 -20.45 0.10 23 0.40 -71 0.43 16.38 5 0.81 -106 12.16 4.06 76 -18.71 0.12 6 0.34 -92 0.51 15.43 6 0.75 -131 11.94 3.95 55 -17.52 0.13 -12 0.27 -116 0.58 14.73 7 0.67 -158 11.47 3.75 33 -16.77 0.15 -30 0.18 -144 0.69 14.12 8 0.61 176 11.01 3.55 12 -16.36 0.15 -45 0.10 174 0.79 13.69 9 0.57 143 10.47 3.34 -10 -15.97 0.16 -61 0.12 93 0.85 13.22

10 0.57 108 9.66 3.04 -32 -15.92 0.16 -77 0.22 53 0.91 12.80 11 0.59 76 8.53 2.67 -54 -16.48 0.15 -93 0.33 28 0.99 12.50 12 0.63 50 7.39 2.34 -74 -17.14 0.14 -106 0.41 9 1.07 10.65 13 0.67 26 6.10 2.02 -93 -18.27 0.12 -119 0.49 -8 1.18 9.64 14 0.72 6 4.81 1.74 -111 -19.74 0.10 -129 0.56 -22 1.30 8.99 15 0.78 -11 3.49 1.50 -128 -21.41 0.09 -138 0.63 -33 1.38 8.81 16 0.82 -24 2.20 1.29 -146 -23.10 0.07 -144 0.67 -43 1.44 8.70 17 0.87 -38 0.59 1.07 -164 -25.04 0.06 -151 0.73 -53 1.46 8.79 18 0.90 -52 -1.63 0.83 178 -29.12 0.04 -159 0.78 -65 1.80 8.58

max

[1]

Note:

1. G

= MAG for K > 1 and G

max

= MSG for K ≤ 1.

max

ATF-36163 Typical Noise Parameters

Common Source, Z

Freq. F

GHz dB dB Mag. Ang. -

2 0.48 18.77 0.78 28 0.38 3 0.53 16.75 0.75 41 0.32 4 0.57 15.17 0.68 55 0.26 5 0.61 14.14 0.60 71 0.20 6 0.66 13.23 0.55 88 0.15 7 0.71 12.06 0.48 105 0.12 8 0.77 11.22 0.38 119 0.10

9 0.83 10.50 0.32 138 0.07 10 0.89 10.02 0.23 170 0.07 11 0.97 9.44 0.18 -141 0.09 12 1.05 8.92 0.20 -92 0.13 13 1.14 8.45 0.26 -46 0.21 14 1.24 8.12 0.36 -16 0.32 15 1.37 8.08 0.48 4 0.44 16 1.51 8.11 0.59 19 0.60 17 1.68 7.97 0.64 34 0.79 18 1.89 7.59 0.70 51 1.15

min

= 50 Ω, V

= 1.5 V, ID = 10 mA

opt

Rn/Z

2.4

2.0

1.6

(dB)

1.2

min

0.8

0.4

Figure 1. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA.

GAIN (dB)

48 16

018

2 6 10 12

FREQUENCY (GHz)

MSG

|S21|

MAG

(dB)

5-81

Figure 2. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA.

48 16

018

2 6 10 12

FREQUENCY (GHz)

Page 4

ATF-36163 Typical Scattering Parameters, Common Source, Z

Freq. S

= 50 Ω, V

= 1.5 V, ID = 15 mA

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang. — dB

0.5 0.99 -12 13.56 4.76 168 -38.42 0.01 79 0.45 -9 0.12 25.82 1 0.98 -22 13.40 4.68 157 -32.40 0.02 71 0.45 -18 0.18 22.86 2 0.96 -43 13.16 4.55 137 -26.56 0.05 56 0.43 -36 0.26 19.87 3 0.92 -63 13.00 4.47 116 -23.22 0.07 40 0.40 -52 0.35 18.13 4 0.86 -85 12.87 4.40 96 -21.01 0.09 24 0.35 -70 0.46 16.94 5 0.80 -108 12.68 4.30 75 -19.25 0.11 7 0.28 -92 0.55 15.98 6 0.74 -133 12.38 4.16 53 -18.13 0.12 -11 0.21 -116 0.62 15.25 7 0.66 -160 11.85 3.91 31 -17.39 0.14 -28 0.13 -146 0.74 14.62 8 0.59 173 11.33 3.68 11 -16.95 0.14 -42 0.06 156 0.84 14.14 9 0.56 141 10.74 3.44 -11 -16.54 0.15 -58 0.12 73 0.90 13.63

10 0.56 106 9.89 3.12 -33 -16.42 0.15 -73 0.23 44 0.95 13.16 11 0.59 74 8.74 2.74 -54 -16.83 0.14 -88 0.34 23 1.03 11.78 12 0.63 49 7.59 2.40 -74 -17.39 0.14 -102 0.42 6 1.10 10.62 13 0.68 25 6.29 2.06 -93 -18.42 0.12 -115 0.50 -10 1.19 9.72 14 0.73 5 5.01 1.78 -110 -19.74 0.10 -124 0.57 -23 1.29 9.15 15 0.79 -12 3.70 1.53 -127 -21.31 0.09 -133 0.64 -34 1.35 8.99 16 0.83 -25 2.43 1.32 -144 -22.85 0.07 -139 0.68 -44 1.39 8.93 17 0.87 -38 0.84 1.10 -163 -24.73 0.06 -148 0.73 -54 1.39 9.06 18 0.91 -53 -1.33 0.86 180 -28.87 0.04 -155 0.78 -66 1.67 8.92

max

[1]

Note:

1. G

= MAG for K > 1 and G

max

= MSG for K ≤ 1.

max

ATF-36163 Typical Noise Parameters

Common Source, Z

Freq. F

GHz dB dB Mag. Ang. -

2 0.49 18.87 0.84 28 0.38 3 0.54 17.20 0.74 42 0.31 4 0.58 15.75 0.66 57 0.25 5 0.63 14.49 0.59 72 0.19 6 0.68 13.61 0.54 90 0.15 7 0.73 12.36 0.46 106 0.11 8 0.79 11.54 0.37 121 0.09

9 0.85 10.82 0.30 140 0.08 10 0.91 10.32 0.21 174 0.08 11 0.99 9.73 0.17 -133 0.10 12 1.07 9.22 0.20 -83 0.14 13 1.17 8.68 0.26 -40 0.22 14 1.27 8.41 0.38 -12 0.34 15 1.40 8.36 0.49 7 0.46 16 1.54 8.37 0.60 21 0.64 17 1.72 8.10 0.62 35 0.85 18 1.93 8.00 0.71 52 1.18

min

= 50 Ω, V

= 1.5 V, ID = 15 mA

opt

Rn/Z

2.4

2.0

1.6

(dB)

1.2

min

0.8

0.4

Figure 3. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA.

GAIN (dB)

48 16

018

2 6 10 12

FREQUENCY (GHz)

MSG

|S21|

48 16

018

2 6 10 12

FREQUENCY (GHz)

MAG

(dB)

5-82

Figure 4. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA.

Page 5

ATF-36163 Typical Scattering Parameters, Common Source, Z

Freq. S

= 50 Ω, V

= 2.0 V, ID = 10 mA

K Gmax

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang. – dB

0.5 0.99 -11 13.06 4.50 168 -37.72 0.01 79 0.55 -9 0.11 25.46 1 0.99 -22 12.90 4.42 158 -32.04 0.03 71 0.55 -18 0.16 22.46 2 0.96 -42 12.69 4.31 138 -26.38 0.05 56 0.53 -35 0.24 19.50 3 0.93 -62 12.57 4.25 118 -22.97 0.07 40 0.50 -52 0.32 17.77 4 0.87 -83 12.51 4.22 97 -20.72 0.09 23 0.44 -70 0.42 16.61 5 0.81 -106 12.38 4.16 76 -18.94 0.11 6 0.38 -90 0.51 15.67 6 0.75 -131 12.15 4.05 55 -17.79 0.13 -12 0.31 -112 0.58 14.98 7 0.67 -157 11.70 3.84 33 -17.08 0.14 -30 0.21 -137 0.69 14.38 8 0.60 176 11.25 3.65 13 -16.65 0.15 -44 0.13 -168 0.79 13.96 9 0.57 144 10.73 3.44 -10 -16.25 0.15 -60 0.10 115 0.85 13.50

10 0.56 109 9.95 3.14 -32 -16.25 0.15 -76 0.18 61 0.91 13.10 11 0.58 77 8.86 2.77 -53 -16.77 0.15 -91 0.29 32 1.00 12.52 12 0.62 50 7.75 2.44 -73 -17.39 0.14 -104 0.37 12 1.08 10.82 13 0.67 26 6.49 2.11 -93 -18.56 0.12 -117 0.46 -5 1.19 9.85 14 0.72 6 5.24 1.83 -110 -19.91 0.10 -126 0.53 -19 1.31 9.24 15 0.78 -10 3.96 1.58 -128 -21.51 0.08 -134 0.60 -30 1.38 9.07 16 0.82 -24 2.68 1.36 -146 -23.10 0.07 -139 0.65 -40 1.42 9.03 17 0.87 -37 1.08 1.13 -165 -24.88 0.06 -147 0.71 -50 1.38 9.28 18 0.91 -52 -1.16 0.88 177 -28.64 0.04 -153 0.78 -63 1.63 9.06

Note:

1. G

= MAG for K > 1 and G

max

= MSG for K ≤ 1.

max

2.4

[1]

ATF-36163 Typical Noise Parameters

Common Source, Z

Freq. F

GHz dB dB Mag. Ang. -

2 0.46 18.60 0.84 28 0.38 3 0.50 16.75 0.76 41 0.31 4 0.54 15.55 0.67 56 0.25 5 0.59 14.20 0.61 70 0.20 6 0.63 13.37 0.55 88 0.15 7 0.68 12.12 0.49 103 0.12 8 0.74 11.35 0.39 118 0.10 9 0.80 10.59 0.33 135 0.07

10 0.86 10.11 0.23 165 0.07 11 0.94 9.57 0.17 -145 0.09 12 1.02 9.08 0.18 -93 0.12 13 1.11 8.59 0.24 -47 0.19 14 1.22 8.30 0.34 -16 0.30 15 1.35 8.29 0.47 5 0.42 16 1.51 8.32 0.58 19 0.57 17 1.69 8.07 0.60 34 0.76 18 1.92 7.68 0.66 50 1.10

min

= 50 Ω, V

= 2.0 V, ID = 10 mA

opt

Rn/Z

2.0

1.6

(dB)

1.2

min

0.8

0.4

Figure 5. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA.

GAIN (dB)

48 16

018

2 6 10 12

FREQUENCY (GHz)

MSG

|S21|

MAG

(dB)

5-83

Figure 6. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA.

48 16

018

2 6 10 12

FREQUENCY (GHz)

Page 6

ATF-36163 Typical Scattering Parameters, Common Source, Z

Freq. S

= 50 Ω, V

= 2 V, ID = 15 mA

K Gmax

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang. – dB

0.5 0.99 -12 13.85 4.93 168 -38.42 0.01 79 0.51 -9 0.12 26.10 1 0.98 -22 13.70 4.84 157 -32.40 0.02 71 0.50 -18 0.17 23.11 2 0.96 -43 13.45 4.70 137 -26.74 0.05 56 0.48 -35 0.26 20.13 3 0.92 -63 13.29 4.62 117 -23.48 0.07 40 0.45 -52 0.35 18.40 4 0.86 -85 13.16 4.55 96 -21.31 0.09 24 0.40 -69 0.46 17.22 5 0.79 -108 12.96 4.45 75 -19.58 0.11 7 0.33 -90 0.55 16.26 6 0.73 -133 12.67 4.30 53 -18.42 0.12 -10 0.26 -112 0.62 15.54 7 0.65 -160 12.13 4.04 32 -17.72 0.13 -28 0.17 -136 0.75 14.93 8 0.59 173 11.63 3.81 11 -17.27 0.14 -42 0.09 -171 0.84 14.46 9 0.55 141 11.06 3.57 -11 -16.83 0.14 -57 0.09 93 0.90 13.95

10 0.56 107 10.23 3.25 -32 -16.77 0.15 -72 0.19 51 0.96 13.50 11 0.58 75 9.11 2.86 -53 -17.14 0.14 -87 0.30 27 1.04 11.93 12 0.63 49 8.00 2.51 -73 -17.72 0.13 -99 0.38 9 1.11 10.85 13 0.68 26 6.75 2.17 -92 -18.71 0.12 -112 0.47 -7 1.20 10.00 14 0.73 6 5.49 1.88 -110 -20.00 0.10 -121 0.54 -20 1.30 9.45 15 0.78 -11 4.22 1.63 -127 -21.41 0.09 -129 0.61 -31 1.35 9.30 16 0.83 -24 2.99 1.41 -145 -22.73 0.07 -135 0.66 -41 1.36 9.31 17 0.88 -38 1.42 1.18 -164 -24.44 0.06 -143 0.72 -51 1.31 9.56 18 0.91 -52 -0.79 0.91 178 -27.96 0.04 -149 0.78 -63 1.50 9.44

Note:

1. G

= MAG for K > 1 and G

max

= MSG for K ≤ 1.

max

ATF-36163 Typical Noise Parameters

Common Source, Z

Freq. F

GHz dB dB Mag. Ang. -

2 0.48 18.97 0.83 28 0.37 3 0.52 17.27 0.74 41 0.31 4 0.56 15.75 0.67 56 0.25 5 0.61 14.54 0.60 71 0.19 6 0.65 13.68 0.55 89 0.15 7 0.70 12.47 0.46 104 0.11 8 0.76 11.66 0.37 118 0.09 9 0.82 10.94 0.31 136 0.08

min

= 50 Ω, V

= 2.0 V, ID = 15 mA

opt

Rn/Z

2.4

2.0

1.6

(dB)

1.2

min

0.8

0.4

Figure 7. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2 V, ID = 15 mA.

48 16

018

2 6 10 12

FREQUENCY (GHz)

10 0.88 10.44 0.21 168 0.07 11 0.95 9.88 0.15 -137 0.09 12 1.03 9.38 0.18 -85 0.13 13 1.12 8.90 0.25 -41 0.21 14 1.23 8.63 0.36 -13 0.32 15 1.35 8.59 0.48 7 0.44 16 1.49 8.63 0.58 20 0.60 17 1.65 8.68 0.65 34 0.79 18 1.86 8.32 0.70 51 1.10

GAIN (dB)

MSG

|S21|

MAG

[1]

(dB)

5-84

Figure 8. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2 V, ID = 15 mA.

48 16

018

2 6 10 12

FREQUENCY (GHz)

Page 7

ATF-36163 Typical “Off” Scattering Parameters, Common Source, Z

=␣ 0 V

GS␣

Freq. S

= 50 Ω,V

=0 V,

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang.

0.5 0.998 -10 -46.02 0.01 80 -46.02 0.01 86 0.703 170 1 0.993 -20 -39.17 0.01 81 -39.17 0.01 83 0.701 160 2 0.99 -37 -32.77 0.02 75 -32.77 0.02 76 0.70 139 3 0.98 -55 -28.64 0.04 67 -28.64 0.04 68 0.71 119 4 0.96 -74 -25.35 0.05 56 -25.19 0.06 57 0.73 99 5 0.94 -95 -22.62 0.07 42 -22.50 0.08 42 0.74 81 6 0.92 -118 -20.45 0.10 27 -20.45 0.10 27 0.75 63 7 0.89 -142 -18.79 0.12 11 -18.71 0.12 11 0.77 46 8 0.86 -168 -17.02 0.14 -6 -17.02 0.14 -5 0.78 30 9 0.84 162 -15.70 0.16 -24 -15.70 0.16 -24 0.81 16

10 0.83 128 -14.85 0.18 -44 -14.85 0.18 -44 0.83 3 11 0.83 94 -14.66 0.19 -64 -14.66 0.19 -64 0.84 -10 12 0.85 64 -14.85 0.18 -83 -14.85 0.18 -83 0.85 -22 13 0.86 36 -15.76 0.16 -101 -15.76 0.16 -101 0.87 -34 14 0.87 12 -17.14 0.14 -116 -17.08 0.14 -115 0.89 -44 15 0.90 -8 -18.71 0.12 -129 -18.71 0.12 -129 0.89 -53 16 0.93 -24 -20.45 0.10 -140 -20.45 0.10 -140 0.90 -62 17 0.93 -39 -23.35 0.07 -154 -23.10 0.07 -152 0.90 -71 18 0.93 -53 -27.96 0.04 -161 -28.18 0.04 -161 0.90 -81

ATF-36163 Typical “Off” Scattering Parameters, Common Source, Z

=␣ -1.5 V

GS␣

Freq. S

= 50 Ω, V

= 2.0 V,

GHz Mag. Ang. dB Mag. Ang. dB Mag. Ang. Mag. Ang.

0.5 0.97 -8 -34.89 0.02 82 -34.89 0.02 81 0.999 -7 1 0.98 -16 -28.87 0.04 74 -28.87 0.04 73 0.998 -14 2 0.99 -30 -22.85 0.07 59 -22.97 0.07 59 0.995 -29 3 0.98 -43 -19.33 0.11 44 -19.33 0.11 44 0.98 -43 4 0.97 -57 -16.71 0.15 29 -16.71 0.15 30 0.97 -57 5 0.96 -72 -14.42 0.19 14 -14.47 0.19 14 0.95 -74 6 0.94 -87 -12.62 0.23 -2 -12.65 0.23 -2 0.94 -91 7 0.92 -103 -10.90 0.29 -20 -10.96 0.28 -20 0.92 -107 8 0.89 -119 -9.60 0.33 -37 -9.63 0.33 -37 0.89 -125 9 0.85 -136 -8.09 0.39 -56 -8.09 0.39 -56 0.83 -148

10 0.79 -158 -6.73 0.46 -79 -6.73 0.46 -79 0.79 -174 11 0.74 177 -5.85 0.51 -106 -5.87 0.51 -106 0.75 156 12 0.72 149 -5.71 0.52 -136 -5.71 0.52 -136 0.73 123 13 0.71 114 -6.54 0.47 -170 -6.52 0.47 -170 0.74 86 14 0.75 74 -8.95 0.36 155 -8.92 0.36 156 0.79 50 15 0.82 35 -12.80 0.23 123 -12.69 0.23 123 0.85 18 16 0.89 5 -18.49 0.12 94 -18.20 0.12 95 0.90 -8 17 0.91 -21 -24.88 0.06 79 -24.44 0.06 84 0.91 -30 18 0.92 -42 -27.54 0.04 70 -27.96 0.04 69 0.90 -50

5-85

Page 8

1.9 dB

1.4 dB

1.3 dB

1.2 dB

1.1 dB

Figure 9. Smith Chart with Noise Figure and Available Gain Circles at 12 GHz, VDS = 1.5 V, ID = 10 mA.

9.5 dB

10.5 dB

11.5 dB

Phase Reference Planes

The positions of the reference planes used to measure S-

Parameters and to specify Γ

opt

for the Noise Parameters are shown in Figure 10. As seen in the illustration, the reference planes are located at the extremities of the package leads.

REFERENCE

PLANES

TEST CIRCUIT

Figure 10. Reference Planes.

SOT-363 PCB Layout

A PCB pad layout for the miniature SOT-363 (SC-70) package used by the ATF-36163 is shown in Figure 11 (dimensions are in inches). This layout provides ample allowance for package placement by automated assembly equipment. The layout is shown with a nominal SOT-363 package footprint superimposed on the PCB pads.

0.026

0.075

0.035

0.016

Figure 11. PCB Pad Layout (Dimensions in Inches).

5-86

Page 9

Package Dimensions

Outline 63 (SOT-363/SC-70)

1.30 (0.051) REF.

2.20 (0.087)

2.00 (0.079)

0.10 (0.004)

0.00 (0.00)

0.25 (0.010)

0.15 (0.006)

2.20 (0.087)

1.80 (0.071)

DIMENSIONS ARE IN MILLIMETERS (INCHES)

1.35 (0.053)

1.15 (0.045)

0.650 BSC (0.025)

1.00 (0.039)

0.80 (0.031)

0.30 REF.

10°

0.30 (0.012)

0.10 (0.004)

Part Number Ordering Information

No. of

Part Number Devices Container

ATF-36163-TR1 3000 7" Reel

ATF-36163-BLK 100 antistatic bag

0.425 (0.017) TYP.

0.20 (0.008)

0.10 (0.004)

5-87

Page 10

Device Orientation

REEL

TOP VIEW

4 mm

END VIEW

CARRIER

TAPE

USER FEED DIRECTION

COVER TAPE

Tape Dimensions and Product Orientation

For Outline 63

(CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS)

8 mm

36 36 36 36

CAVITY

PERFORATION

CARRIER TAPE

COVER TAPE

DISTANCE

8° MAX.

DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES)

LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER

DIAMETER PITCH POSITION

WIDTH THICKNESS

WIDTH TAPE THICKNESS

CAVITY TO PERFORATION (WIDTH DIRECTION)

CAVITY TO PERFORATION (LENGTH DIRECTION)

B K P D

D P E

W t

C T

0 0 0

2.24 ± 0.10

2.34 ± 0.10

1.22 ± 0.10

4.00 ± 0.10

1.00 + 0.25

1.55 ± 0.05

4.00 ± 0.10

1.75 ± 0.10

8.00 ± 0.30

0.255 ± 0.013

5.4 ± 0.10

0.062 ± 0.001

3.50 ± 0.05

2.00 ± 0.05

0.088 ± 0.004

0.092 ± 0.004

0.048 ± 0.004

0.157 ± 0.004

0.039 + 0.010

0.061 ± 0.002

0.157 ± 0.004

0.069 ± 0.004

0.315 ± 0.012

0.010 ± 0.0005

0.205 ± 0.004

0.0025 ± 0.00004

0.138 ± 0.002

0.079 ± 0.002

5-88

5° MAX.